Cataloguing electronic documents makes new demands on libraries. This thesis discusses the metadata formats Dublin Core and MARC which are, individually or in combination, commonly used for object description in the digital library.The formats are studied with particular emphasis on characteristics such as underlying reasoning (ambitions during the development of the formats), flexibility (possibilities of expansion and adaption to new demands) and interoperability (cooperation between different metadata formats). The formats are dealt with in their context, i.e. we discuss what types of documents the formats are meant to describe, what environment they were originally created for, what functions they are meant to fill (to find, identify, select and acquire/obtain entities), and also how these factors are related. The Swedish projects SAFARI (which uses Dublin Core) and NetSök (which uses MARC) are presented briefly.

The purpose of this work was to provide a better understanding of urea?s decomposition and byproduct formation in an SCR system on heavy trucks. In my experimental setup with TGA-DSC-FTIR (a combination of two thermal analysis methods and a method for gas phase detection), an FTIR method for urea in the gas phase was developed for the qualitative and quantitative determination of urea and its decomposition products. Chemicals such as urea, biuret, cyanuric acid and melamine of p.a. quality were used in this method development. Beforehand, there was no FTIR method available to detect these substances; hence, the aim of this work was to develop an FTIR method to understand the degradation chain of urea. The combination of TGA and DSC was used for analysis of different samples, where urea, biuret, cyanuric acid and melamine in varying amounts have been weighted in for various experiments in order to study the temperature at which a phase transition or reaction occurs, i.e.

In this thesis, the flows of reactive nitrogen (Nr) in Scania were investigated and quantified. The thesis was also intended to form a basis for comparison between the urban nitrogen flow and other flows of nitrogen within Scania. The management of nitrogen in society has disturbed the natural nitrogen cycle. This is linked to a series of environmental problems such as eutrophication, acidification, global warming and smog. The method used was Substance Flow Analysis (SFA) for Nr. For calculation and flow charts Scania was divided into three subsystems; air, water and society.

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

The shape and arrangement of the outdoor environment at a preschool has a critical impact on the possibilities to practice different pedagogic activities (Grahn et al.1997). At the preschool at Edwin Ahlqvists road, the employees are inspired by Reggio Emilia in their way of thinking, and they consider their outdoor environment is not suitable for the pedagogic activities they use. Reggio Emilia is a city in the north of Italy (Wallin 2001). The preschools there are famous for their pedagogy, their creativity and their democratic way of working (Dahlbech & Johansson 1986). The Reggio Emilia pedagogy is constantly renewed and developed, but with the children?s needs in focus and simultaneously with the quick changes of the modern society.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

During the 1970?s the interest for quality management and the concept of quality costs increased considerably. Business leaders noticed that there was a great potential for reducing costs of poor quality. Since up to 10-30% of a company?s total turnover may consist of poor quality costs some consider them as an unexploited goldmine.

Extensive cattle management was reintroduced in Sweden during the 1950´s and 60´s. Usually this term refers to suckler cows for meat production that is kept outdoors all year around. Suckler cow farms tend to become fewer but bigger over time. Still however most of the farms with beef cows are small. Extensive animal husbandry can lead to animals becoming shy which leads to difficulties when they are handled due to veterinary treatments, marking, transport etc.

Swedish forests are dominated by just two conifer species Norway spruce and Scotch pine. They are not able to achieve the highest possible production or fulfill industry demands for raw materials. The introduction of exotic conifers can potentially meet these shortcomings and present a relevant solution. This study was conducted in a block experiment with ten blocks planted in 1987 by SCA in North Sweden. The objective of the block experiment was to study if Black spruce is an appropriate alternative to Lodgepole pine, Norway spruce and Scotch pine on different site classes.

The aim of this thesis is to give an insight to how work is being pursued within Swedish SMEin the clothing industry. Furthermore we investigate how efforts can proceed withenvironmental questions in a quest for sustainable development and bring clarity in thedifficulties that occur. Through the use of company examples and a description of how theywork we wanted to give stakeholders knowledge in what resources and procedures that areused today on the market. The function of the report is moreover to provide Swedish smalland medium-sized clothing enterprises suggestions and directions of how to advance withinsustainable development.In our theoretical frame we have chosen to administer the theories that we found suitable forour study. Seen from a perspective of sustainability we have thus applied the theories ofstakeholder and legitimacy, an analysis model for a company?s actions in environmentalquestions and the theory of SME which describes a small or middle sized enterprise?s fivecompetitive variables.The empirical frame we acquired for this thesis is presented in three chapters.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Detta examensarbete har utförts inom borrstålstillverkningen på Sandvik Materials Technology (SMT) i Sandviken. Borrstål är en viktig produkt för SMT, vars efterfrågan har ökat stadigt under en lång tid och även i framtiden spås öka. SMT har länge strävat efter att höja leveransprecisionen på det borrstål som levereras, då leveransprecisionsmålet som i dagsläget ligger på 95 procent inte har uppnåtts på länge. SMT har även uttryckt önskemål om en kortare ledtid för tillverkningen av borrstål från råvara till kund, vilken historiskt sett uppskattats till åtta veckor.Syftet med examensarbetet är att, genom utförandet av en värdeflödesanalys, identifiera förbättringsförslag som kan effektivisera produktions- och planeringsprocessen vid ett tillverkande företag.De metoder som har använts för att utföra examensarbetet är litteraturstudier, observationer samt intervjuer. Utöver detta har prognos-, beställnings- och leveransdata samlats in med hjälp av de system som används på SMT samt även information kring cykeltider för de ingående processerna i borrstålsflödet.De mest tongivande teorierna som examensarbetet utgått ifrån och som författarna genomgående haft i åtanke är Lean Production, värdeflödesanalys, lagerstyrningsprinciper, linjebalansering och SMED.Genomförd kartläggning av nuläge och analys visar att kundernas prognos- och beställningsmönster inte stämmer överens av olika orsaker samt att balansen i borrstålsflödet inte är optimal.

Background ? The last 20 years healthcare has been facing increased demands on efficiency and increased customer satisfaction. This despite reduced resources and increasing demand. These demands are presents in all departments within healthcare organisations, including medical laboratories that currently receive an ever-increasing number of remittances. Laboratory flows are quickly becoming overloaded with samples and related materials.

People who live in northern part of the world spend much more time indoors than those who live in warmer countries. In addition that home should be safe, it should also protect one against heat, cold, sunlight and pollution. The indoor environment is affected by installations, material and how the building is formed. Those anomalies that are visible, felt or smelled can be noticed and be rectified. But it?s much more difficult if these abilities are missing.

Under höstterminen 2013 har Stefan Erlandsson och Louise Andersson, designingenjörsstudenter på Högskolan i Skövde, utfört ett produktutvecklingsprojekt i samarbete med entreprenören Lars Willebrand. Målsättningen för projektet var att utveckla ett lyftverktyg som ska komplettera Willebrands produktserie bestående av; travers, svängkran, plåtbyrå och lyftverktyg. Lyftverktyget ska vara anpassat för att användas i kombination med en plåtbyrå, vilket innebär att det kommer användas till att lyfta material från höga och låga höjder. Lyftverktyget måste därmed konstrueras i syfte att underlätta för användaren och undvika arbetsskador som kan uppstå vid dessa lyft. Lyftverktyget ska även kunna anpassas till kunder som endast avser att lyfta skivformade produkter i midjehöjd.Projektet inleds med en förstudie där mycket fokus läggs på ergonomi och användaren.