This Master of Science thesis project handles issues around managing data from the digital tachographsystem. European legislation states that companies must download the data of the digital tachograph systemand store it for at least one year for control purposes. The system stores data on the vehicle unit located inthe driving compartment and on smart cards personal for each driver.Acquiring data from the previous analogue tachograph was done instantaneously since the data wasphysically printed to a circular paper chart when driving. To acquire data from the digital system one mustperform a download from the vehicle unit and later transfer it to some form of backup solution for longterm storage. Data must also be downloaded from the driver smart cards.Download of data from the vehicle unit is the most time consuming task and may take up to 30minutes pervehicle.

Denna uppsats granskar möjligheter att använda datorstöd för automatisk rättning avolika typer av utvärdering. Olika teorier jämförs med varandra för att utvärderaderas styrkor och svagheter och för att se vilka begränsningar som finns idag.Tanken är att se möjligheterna med dessa system och vad som är möjligt att användaoch när det är ekonomiskt försvarbart att använda automatisk utvärdering istället förmanuell rättning..

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.

In this project the task has been to develop a product that will facilitate an operation for personnel working in a sterilization center. The operation is to steer the front of a loading trolley into the chamber of an autoclave, a so-called docking. The moment is complicated because the margins to deviate from ideal docking position and still succeed, is very small.The principal Getinge's desire was that the product could be retrofitted at the customers on their existing systems. One of the demands was that the product should fit two types of trolleys, one with a adjustable working height and one with a fixed working height. Getinge is supposed to purchase the system from a subcontractor who shall manufacture it and the requirement from Getinge is that the cost of purchase mustn't exceed SEK 500Initially principles, solving the problem was developed.

AbstractDuring recent years the climate in recruiting new personnel has hardened as a result of high levels of employment and increasing competition in labour market. In order to resolve this problem, organisations have to adapt new strategies to attract and meet the demands of potential employees who have the required competence to meet job requirements.The aim of this study has been to examine a well functioning work place in order to elucidate explicit examples of what employees consider positive, and what can be ascertained as positive deviations. Narratives emanating from the unit manager and personnel illustrate their views on the positive influences found in their working place. Another ambition is to increase awareness and understanding about the factors that promote satisfaction in the workplace and positive deviation; and to utilise this knowledge.Traditional research on organisations has frequently focused on problems. The theoretical point of departure of this study is based on Positive Organizational Scholarship, abbreviated as POS.

Storleken och komplexiteten på dagens system och applikationer ökar. Detta leder till att kraven på system och applikationer ökar också eftersom kunderna kräver av dagens system full funktionalitet inom olika typer av distribuerade miljöer. Kunder är inte bara intresserade av funktionerna i systemen och applikationerna, de förväntar sig också att systemet skall vara av god kvalitet. Av dessa skäl är det mycket viktigt att testa system och applikationer för att säkerställa att de uppfyller kundernas förväntningar. Däremot är det inte bara själva mjukvarans kvalitets frågor som organisationer behöver ha i åtanke, en lika viktig del är själva testprocessens kvalitet.

Den här rapporten undersöker möjligheterna att analysera Nasdaq OMX Nordic Stockholm genom att kombinera flertalet olika analysmetoder. Vi utvecklade ett komplett automatiskt förutsägnings- och handelssystem bestående avfundamental analys, neurala nätverk, samt klassisk teknisk analys. Det här systemet visar att trots att ingen av dessa metoder var särskilt framgångsrika individuellt så kunde en kombination av alla tre påvisa utmärkta resultat..

Each year approximately 2,000 new detailed development plans are accepted in Sweden. When an area is covered by a new detailed development plan, it is often necessary that land has to be acquired to adjust the property units to the new plan. The owner conditions of the property units can usually be adjusted through negotiations between the seller and the buyer. But in some situations, when no agreements can be reached, it is possible to use coercive measures to purchase the land. Compulsory purchases are only permitted when certain legal criteria?s are met.

Dementia may cause difficulties in communicating. People suffering from dementia are therefore often described as being unable to take part in meaningful conversation. The responsibility to create understanding in a conversation is shared by all participants. By means of different strategies, participants in conversation can construct understanding through collaboration. How these strategies are utilized in conversation where one or more of the participants suffer from dementia is relatively unknown.

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

En ökad efterfrågan på mjukvaruprodukter har medfört att antalet tillverkare av mjukvara ökat under senare år. Som en följd av detta har konkurrensen inom branschen ökat. Tillverkarna vill snabbt komma ut med sina produkter på marknaden vilket har medfört kortare utvecklingstider. Detta påverkar hela utvecklingsprocessen och även testningen av mjukvaran. Dessutom har mjukvaran blivit allt mera komplex vilket ytterligare ökar behovet av testning.

Detta examensarbete har utförts i samarbete med Löfqvist Engineering i Örebro. Uppgiften har varit att utföra en simulering av en stor automatiserad produktionslina som ska användas vid tillverkning av avgassystem till lastbilar. Utifrån denna simulering skall exakta cykeltider för produktionen bestämmas. Dessa tider kan sedan användas av Löfqvist Engineering för att verifiera tidigare uppskattade tider.Arbetet inkluderar en litteraturstudie om Lean Production och hur det fungerar ihop med automation. Det finns även med lite bakgrundsinformation om Just In Time, olika filformat och robotsimulering i allmänhet för att ge en bättre överblick av ämnet.Programmet som har valts för att utföra simuleringen är Tecnomatix Process Simulate och den inbyggda Line Simulation modulen.

The aim of the study was to gain a deeper understanding of the expectations that assistant nurses in the elderly care have on unit manager's leadership and the consequences if the expectations are not met. To answer the purpose of this paper a qualitative research was conducted with interviews with six assistant nurses in municipal elderly care. To analyze the empirical material communication were used as a theoretical concept. Communication includes codes, signals and messages to be interpreted by the parties in a conversation and they can be both verbal and nonverbal. This means that communication is complicated and can cause confusion if it is interpreted wrong.

Detta examensarbete på 22,5 hp är en del av mekatronikingenjörsutbildningen vid Karlstads universitet. Uppdragsgivaren är Valmet AB (tidigare Metso AB) i Hagfors som tillverkar och säljer malsegmentslitdelar för pappersindustri och massaindustri.Projektet behandlar en av de tre formmaskiner som finns på företaget, kallad M01. Formningsmomentet är grunden till gjutresultatet av produkterna och i dagsläget är det för stora variationer på kvalitetsutfall, delvis orsakat av för många frihetsgrader i hur maskinen opereras. Målet är att komma fram till en automatiserad lösning av utstötning av skalhalvor, hålla en jämnare nivå i sandkassen genom nivåmätning samt minska spill vid påfyllningen av sand.En tryckvakt och en ultraljudsgivare användes för att kunna mäta maskinens tillstånd och som styrning användes en extern PLC, Siemens LOGO! utöver den ordinarie PLC:n som används.Resultatet blev en prototyp som tillsammans med ett antal nya sensorer kan göra testmätningar och tillfälligt styra maskinen för att få en anvisning om det kan vara en bra lösning i framtiden. Lösningen ska senare kunna utvecklas fullt ut med bättre sensorer och dess funktioner ska kunna implementeras i den ordinarie PLC:n för att användas i samtliga formmaskiner.Alla lösningar fick inte fullt önskvärt resultat men de är ändå ett steg i rätt riktning.

The aim: was to describe and compare a group of experts and critical care nurses' agreement in detecting delirium in intubated, ventilator treated patients with sedation / analgesia, before and after an in house training intervention with the instrument Confusion Assessment Method for the Intensive Care Unit (CAM-ICU).Method: A quasi-experimental study, one group pretest - posttest design. A convenience sample of 17 critical care nurses in a general intensive care unit included. To detect delirium the instrument CAM-ICU was used, 21 paired tests before and 22 after an educational intervention.Main Results: The results showed that after an in house training intervention sensitivity and kappa coefficient improved of the characteristic 1 "acute onset and fluctuating course," an improvement that was significant. In other features, and overall values were signs of numerical improvement and deterioration in sensitivity, specificity and kappa coefficient but no significant change.Conclusion: Implementing a new instrument for detecting delirium in clinical practice requires education and follow-up. A small sample of critical care nurses with varying ability to use the new instrument and the fact that patients' status may change rapidly making it difficult to draw any conclusions from this study.