The aim of this study was to examine the amounts of heavy metals in the sediment of a wetland constructed for stormwater treatment. The wetland is called Vattenparken and is located in the city of Enköping. The heavy metals which were analysed were Pb, Cd, Ni, Zn, Cu, Cr and Hg. The total metal concentrations were determined using HNO3 chemical extraction. From 8 sampling sites 5 sediment cores were taken.

I?ve tried to find the most effective and cost effective way to harvest straw for energy recovery.You can choose between round bales and big square bales. Square bales are the cheapest way to produce straw for fuel recovery because you can optimize the length of the bales so they fit the transportation equipment.In the Malmö area the average days of harvesting hay is 55. The effectively of transportation depends mostly of the speed, the distance and density of the bales. To increase the capacity of bale transportation larger loads and higher density of the bales is necessary.

Strategies for the board game Hive was implemented and evaluated in this project. The report covers the rules as well as the system that was implemented in order to build strategies. The strategies are evaluated based on how they perform against each other. Two search algorithms were implemented: Minmax and Alpha-Beta Pruning. Alpha-Beta with depth 4 had the best performance against other strategies as well as in individual tests..

This thesis concerns how the power quality in the grid is affected by the connection of wind power plants. As things are at present, Fortum Distribution AB has a number of wind turbines and wind parks connected to the own grid. As the pressure on building and connecting additional wind power is increasing, so is also the interest of how the already existing wind power generation affects the power quality in the nearby distribution grids. The study is performed by direction of Fortum Distribution AB and is limited to the 10 kV/40 kV-grid in Bohuslän, Sweden. The methods for calculation of power quality are compared to the results of a number of measurements.

Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.

Post-anaesthetic myopathy (PAM) is a serious occasional complication of general anaesthesia in horses. It causes not only pain and suffering to the horse, but also suffering (trauma) to the owner with increased veterinary costs. In the worst case PAM can be fatal. The anaesthetic nurse must know which parameters have to be taken into consideration in the prevention of PAM, to be able to prevent it, and use that knowledge for the animals safety. The aim of this literature review was to investigate and make a presentation of the factors and measurements associated with PAM, with focus on how to monitor these measurements to prevent it from happening, and the advice a Veterinary nurse can give to the horse owner regarding this condition. According to literature there a few factors that greatly increase the risk of PAM, these include- hypotension, periods less than 60 mmHg significantly increases the risk.

Fire is an important ecological factor, but its consumption of coarse woody debris, CWD, has hardly received any attention. In this study, I investigate the consumption in relation to the time of initial flame exposure and propensity for continued combustion of standing CWD of pine (Pinus sylvestris). Two types of CWD were studied. Firstly, wood that had been dead for one to ten years. Secondly, wood that had been dead for several decades. In the burning experiments, logs of approx.

The purpose of this study is to improve the understanding of the dynamics behind Chinese-Western buyer-supplier relationships. The study takes on a partially inductive approach by commencing with exploratory in-depth interviews. The main body of the study consists of a cross-sectional survey. Data has been collected through an on-line questionnaire. The theoretical review consists of industrial relationships with specific accounts on the role of adaptation, trust and commitment; a stream of literature in cross-cultural relationships deriving from Hofstede?s culturalist legacy with specific reference to Chinese-Western relationships, including studies on relationship bonding, and the role of guanxi.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

'Hir in the box' is a study about the gender perspective in packaging design and how it is today. The study deals with the product category razors, for both women and men, to examine and compare products with the same function but with different designs. Based on an analysis of how packages are designed for different sexes, information should be given on how gender-neutral packaging can be designed and used in the future to reach the market. The purpose of the study is also to contribute to future research on the subject. To fulfill the purpose of this study, nuanced and in-depth data is collected by means of a small-N-study and a qualitative study in the form of open group interviews where the survey units are reviewed and discussed.

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

The purpose of this project is to analyze earthing systems for houses. By practical measurements and theoretical analyzes consequences of possible faults, that can occur within the facility and in the low-voltage distribution network, is illustrated.  The reason for this project is that nowadays one has to arrange with a main equipotential bonding system for buildings. Apart from that, if necessary, bathrooms must be provided with a supplementary equipotential bonding system.The practical measurements verify that potential differences in facilities may be due to voltage drops in the PEN conductor between the origin of the electrical installation and the power transformer.Based on the theoretical analyzes of possible faults, it is considered that the requirement for  supplementary equipotential bonding systems for bathrooms in most cases can be questioned, when basic insulation, fault protection, residual current devise and main equipotential bonding system already provides an adequate level of protection.A PEN conductor loss may result in a situation where metallic parts attached to the equipotential bonding system starts working as earth electrodes. Equipotential bonding system may also increase the incidence of stray currents. If TN-C-S systems is provided with a local connection to earth a redundant system against PEN conductor loss is obtained.

In Sweden there are currently two separate guidelines you may use whenperforming calculations on frameworks, BKR and the Eurocodes. Although at theend of 2010 you are not allowed to use BKR any longer and only the Eurocodeswill be viable. The aim of this thesis is to explain how the Eurocodes and EKS work and alsohow they compare to the current guideline BKR. Similarities and differencesbetween these guidelines are also discussed so that the reader will get a betterunderstanding of how the Eurocodes are applied. The areas discussed are asfollows:Principles and adviceSafety ClassesSymbols and IndexesLifespanLoads and partial coefficientThe thesis also deals with the impact that this transition into a new guideline willhave on corporations, guideline costs, education and computer software. As anexample a rough estimate on what costs this transition will create on a companywith 20 employees is also included. Calculations have been performed in order to investigate how the design valuesdiffer between the two guidelines, the Eurocodes and BKR.

The thesis concerns itself with studying the effects private brands has on the consumer?s impulse buying in the grocery industry, as in degree of unplanned spending and the selection process between manufacturer brands and private brands when such a purchase is performed. The study?s methodology is characterised by a qualitative approach, whereby the study acknowledges the inductive approach towards the empirical setting even though the Mehrabian-Russell model along with motivational theories serve as highlighters of relevant aspects in the empirical field. The study concludes that both the utilitarian and the hedonic consumer decide what to buy before entering the store, whereby a low degree of needs arise in the store.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.