There are no general working processes that can stand for how all the investment process is preceded in the organization of major Swedish banks. It is not a question of investment process but rather a question of, investment processes. How these investment processes operates depends totally on the type and size of the current investment, which unit that is operating the processes and what situation the bank currently finds itself in. There is a written form that describes how the different processes should be operated and which capital budget models that should be used but the usage of these forms can be questioned.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

Outages in the electric grid can be costly for society. Because of this, reliability is one of the parameters used to regulate network companies. Reliability in electrical grids can be measured with SAIDI, system average interruption duration index, which for Fortum Distribution has increased in Stockholm?s distribution network (11 kV) in the early 2000?s.By using outage data for Stockholm from 2011-2013, sets of parameters to be used for reliability calculations in the network information program Tekla NIS were derived. Two different options for investment were then analysed: changing old cables with high fault frequencies, and installing automatic switching in distribution substations.

In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

Roughly 130 000 dwellings have been officially registered since Norway as of summer 2009 passed their bill ?Energimerkeforskriften? on energy performance certificates in buildings. The main objective is to decrease the total amount of national energy consumption by producing a methodology of calculation of the integrated energy performance of buildings as well as proposing cost effective measures to lower each building?s energy consumption. As the measures should not contravene nor be incompatible with the intended quality and character of the building, the ?Energimerkeforskriften? exempts buildings that due to their historical and cultural values are protected cultural heritage legislation. The current system offers a couple of professional certification alternatives, but when two online semi-automatic methods developed specifically for non-professionals are by far the most used, and since the methods of calculation primarily have focused on modern building materials and construction, the rest of the historical building stock stands literally unprotected by incorrect performance certificates and high-risk energy efficient measures. The objective of this thesis is to identify if the current Norwegian energy certificate system poses a threat to older buildings.

Syftet med den här rapporten är att beskriva ett antal olika tillvägagångssätt man kan använda sig av då man har behov av att dela in ett lokalt nätverk i olika segment och med det även kunna reglera trafikflödet mellan segmenten. De lösningar som presenteras i arbetet är inriktade mot mikro- och småföretag.Anledningen till att vi har valt att arbeta med det här området är att vi anser att det är viktigt för organisationer att har en strukturerad och segmenterad design på sitt interna datornätverk.Vi har arbetat genom att i förväg samla in information om olika tekniker som kan tänkas lösa vårt problem, och därefter testat olika scenarion med dessa tekniker. Data har samlats in efter varje genomfört scenario och sammanställts i statistisk form för att kunna avgöra vilken metod som var att föredra.Vi har testat lösningar där man segmenterar nätverket i en lager 2-switch medan man möjliggör och förhindrar trafikflöde mellan segmenten i en router. Även lösningar där man använder en lager 3-switch har testats. På så sätt kan routningen ske direkt i switchen och det blir betydligt mindre belastning i routern.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

In theory, the management control of maintenance functions is described as problematic due to the nature of the work performed in the unit. The purpose of this thesis is to examine these predicted problems in practice. Further,the thesis aims at identifying how these control problems may affect the relationships between the maintenance department and its internal customers. A case study has been conducted in one of Sweden?s largest industrial companies to investigate the said control problems in practice.

How do the Swedish police get represented in news media and how does that representation differentiate from other media channels where the police have full control over what is said? Through a discourse analysis of news texts and extracts from the police own webpage and Facebook page, we claim that the discourse in newspapers and the discourse on the webpage and Facebook page is pretty much the same, only packaged differently..

Syftet med vår undersökning av nybilsförsäljarna i Blekinge är att klargöra hur deras belöningssystem är uppbyggda. Sett ur ett ledningsperspektiv vill vi också veta hur de uppfattar sitt belöningssystem, och om de skulle vilja att det utvecklades vidare. Vi vill också ta reda på huruvida deras belöningssystem resulterar i de effekter som de eftersöker, och om systemet resulterar i ett positivt ekonomiskt resultat..

Under början av 1990-talet inledde Volvo Personvagnar i Olofström en process där övervakning av robotiserad MIG/MAG-svetsning var i fokus. Det ledde fram till ett forskningsprojekt som resulterade i att Stefan Adolfsson, Lunds tekniska högskola/Blekinge tekniska högskola, 1998 presenterade avhandlingen Automatic Quality Monitoring in GMA Welding using Signal Processing Methods [5]. I den presenterades ett SPRT-baserat övervakningskoncept för övervakning av MIG/MAG-svetsning med kort- och spraybåge. För att få fram ett kostnadseffektivt övervakningssystem uppkom tanken att använda vanliga PC-datorer som plattform. De erbjuder hög beräkningskapacitet till förhållandevis låg kostnad.

Vad som skiljer en organisation från mängden kan i många fall vara hur god kapacitet som finns för att bemöta det hot en kris kan utgöra. Därför är det viktigt för organisationen att hela tiden aktivt arbeta med att förbättra denna kapacitet, genom att på ett så brett plan som möjligt försöka förbereda sig för de potentiella kriser som kan drabba organisationen. Således blir det en strategisk fråga att ha crisis management-kapacitet, och för att etablera denna måste ledningen styra organisationen i rätt riktning. Därigenom kan en kris hindras från att fortplanta sig som ringar på vatten, och drabba en allt större del av organisationen. Syftet med uppsatsen är att undersöka och beskriva hur en organisation, ur ett styrningsperspektiv, kan etablera eller förbättra sin crisis management- kapacitet.

Tussilago farfara, coltsfoot, is a troublesome perennial weed with deep lying rhizome, which can vegetatively generate new plants. The mechanical control of coltsfoot that is used today, "starvation", which consists of several cultivations of the soil, which fragmentises the rhizome. This results in production of new shoots, which leads to depletion of nutrient resources; as long the new plant is not allowed to establish. However, very little research has been done to investigate how the starving technique affects the regenerative ability of coltsfoot. The purpose of this experiment with coltsfoot was to investigate how fragmentation and burial depths affect the time of emergence, number of emerged shoots per rhizome fragment, number of shoots per node, and if the germination ability within nodes changes during the experiment.

Under början av 1990-talet inledde Volvo Personvagnar i Olofström en process där övervakning av robotiserad MIG/MAG-svetsning var i fokus. Det ledde fram till ett forskningsprojekt som resulterade i att Stefan Adolfsson, Lunds tekniska högskola/Blekinge tekniska högskola, 1998 presenterade avhandlingen Automatic Quality Monitoring in GMA Welding using Signal Processing Methods [5]. I den presenterades ett SPRT-baserat övervakningskoncept för övervakning av MIG/MAG-svetsning med kort- och spraybåge. För att få fram ett kostnadseffektivt övervakningssystem uppkom tanken att använda vanliga PC-datorer som plattform. De erbjuder hög beräkningskapacitet till förhållandevis låg kostnad.

The Effects of dietary biotin supplementation on hoof health in Swedish dairy cows - a controlled cohort field study. The aim of the present degree project was to investigate the effects of biotin supplementation on hoof health in dairy cows. The experiment was performed as a controlled cohort study in three commercial farms in western Sweden from January 2002 to October 2002. The cows were all housed in cubicle systems with transponder concentrate feeding systems. Within each farm the cows were allocated to either biotin or control treatment. The biotin groups received 20 mg of biotin per cow and day, starting 14 days before expected calving.