The aim of this study is to evaluate an alternative projection of the Medial Coronoid Process (MCP) of the canine elbow joint. The projection (Di35M-PrLO) was, to my knowledge, first mentioned in an article by Haudiquet et al in 2002. In that article the projection was tested in vitro, and a good sensitivity was showed for the Medial Coronoid Process. The projection might be helpful in cases of suspected Fragmented Coronoid Process (FCP) . This study is divided into three parts. The first part is an in-vivo test of the projection, including technique and subjective evaluation of the outlining of the MCP.

Purpose The purpose of our study was to investigate the changing nature of volatility during the last 80 years. Like in an American study, we tried to find some trends in the risk of stocks and bonds that would have an impact on the balance of a portfolio of stocks and bonds. At the same time we investigated the influence of inflation on the choice of portfolio. Methods We have used standard statistic tools and formulas to obtain our results. In most cases it was a matter of calculating average and standard deviation.

This report intends to analyze the difference between the original rules and a modification of the rules for the Scandinavian version of the world famous dice game yatzy (yahtzee). Several works are made previously existing strategies for yatzy and Yahtzee.The study was conducted using the optimal strategy calculated and implemented in the programming language Java. The execution of the application to create the file containing the optimal strategy was running on leased powerful servers from Amazon and took just over six hours each.A simulated player played 100,000 games based on the strategy, to obtain data which then was used to plot graphs and analyze the expected score and its standard deviation. The expected value (mean) and standard deviation of the score for the possibility of three or four throws were 233.00 ± 44.82 and 280.07 ± 41.25.In view of the results drawn the expected conclusion that the four possible throws provides increased probability of getting a high score, unlike the case where the player may only be able to throw the dice three times. The fact that the variance is lower in the case of four throw session is equivalent to that the likelihood to get close to the expected value increases..

During 2006 SNVDB (the national road data base for forestry) is being introduced to Holmen Skog. This data base contains all information about Holmen Skogs road systems. The information will then be used in different kinds of optimisation models which only produce correct and reliable results if the input data are of the adequate quality. Today there are reasons to believe that road data is of various qualities. The forest roads are often in a bad condition and have to be improved before a planned harvest. The cost of maintenance and construction of new roads is a large part of the total harvesting cost.

The purpose of this thesis is to analyze green marketing and green brand building from a managerial perspective, with the intention to create an implementation guide for companies in the Swedish consumer market.  The essay is based on a qualitative approach with a mixture of inductive and deductive elements. We have interviewed five people with close links to green marketing. We have during the study identified a number of touch points to be particularly important in the process of incorporating green marketing. These findings are presented in full in chapter five. We have found that the framework of green marketing is established during the company?s choice of green strategy.

Projektets mål har varit att finna orsaker till delaminering av lamellimmade komponenter vid Stora Enso komponentfabrik i Ljusne. Detta resulterade i en analys av de faktorer, både material- och tillverkningsmässiga, som kunde bidra till en försämrad limfogskvalité. Analysen baserades på standard SS-EN 13307 ?Timber blanks and semi-finished profiles for non-structural uses?. En av de gällande faktorerna som analyserades var presstrycket vid limning.

Syftet med examensarbetet är att planera hur Schenker Coldsped ska arbeta för att möta kundens krav, i detta fall Burger King, på att använda regelverket EFSIS ? European FoodSafety Inspection Service. EFSIS erbjuder oberoende inspektionsservice designat för mat, dryck och närliggande branscher. Den standard som Schenker Coldsped AB överväger att certifiera sig emot är EFSIS tekniska standard för lagring och distribution av livsmedel.Coldsped är en del av Schenker Sverige AB. Företaget arbetar med helhetslösningar för transport och lagring av kylda och frysta livsmedel över hela Europa.

Bakgrunden till mitt val av Karlskrona som arbetsområde är ett intresse för hur förbättringar av cykelvägnätet kan öka förutsättningarna för användningen av cykeln som transportmedel i min hemstad. Karlskrona har en god potential att bli en mer aktiv cykelstad. Trots att staden har en speciellt form med sin placering på ett antal öar är den ändå väl samlad på en begränsad yta. Klimatet är bättre än för många andra cykelorter i Sverige, även om vinden är ett påtagligt inslag stora delar av året. I den teoretiska delen redogör jag för de vilkor och förutsättningar som gäller för planering av cykelvägar.

Den här rapporten beskriver arbetet och utförda studier inom området kryptering och VPN. Fokus ligger på hur väl krypteringsalgoritmerna Triple Data Encryption Standard (3DES) och Advanced Encryption Standard (AES) skalar i en förutbestämd miljö. Huvudfokus har varit att svara på frågan: Vilken av krypteringsalgoritmerna AES och 3DES kräver minst systemresurser? Under utbildningstiden har det flera gånger framförts att 3DES-algoritmen skulle vara mer krävande för krypteringsenheterna att utföra jämfört med AES. Denna rapport söker finna om det är så det förhåller sig och i så fall hur stor skillnaden är mellan algoritmerna.

Många utav de krav som idag utformas uppfyller inte kriterierna för att vara högkvalitativa. Denna undersökning behandlar hur användbarhetskrav formuleras i kravspecifikationer. Vi har i vår undersökning utgått ifrån en internationell standard (ISO/IEC/IEEE-29148), som innehåller kriterier för hur både individuella och uppsättningar av krav ska formuleras, som teoretisk modell. Dessa kriterier har vi forskningsförankrat genom att studera vad andra forskare sagt om dessa och därefter har vi använt modellen för att genomföra en dokumentanalys av fem olika kravspecifikationer för fem olika informationssystem. Våra slutsatser påvisar att det kan finnas en brist på kunskap kring hur krav bör formuleras i en kravspecifikation och vi belyser även de samband som finns mellan olika grader av uppfyllelse för kriterier hämtade från ISO/IEC/IEEE-standarden och praktiken.

Modelling of pollutants is commonly used in research and at departments working with environmental issues. The need to use large amounts of data when modelling creates the opportunity for more generalised models with lower data demands. Aggregating functions into coarser elements is a sort of generalisation of actual features in nature.A development of a method and a modelling tool called ?KadmiumKalkylatorn? has been performed to model cadmium pollution in rivers in Skåne, Sweden. The water runoff has been multiplied with cadmium standard concentrations based on membership in landuse classes.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.