This thesis examines the way that subversivity is produced in relation to the name of the author, as understood by Foucault, and what potential for ressistance that can be glimpsed there. This from the reading of three text that in different ways relate to that theme.Firstly, throught the reading of "Isis mamma a?r genusvetare, skribent och konstna?r, min mamma a?r f.d. sta?derska, kokerska och dagisfro?ken, numera fo?rtidspensiona?r med diagnosen fibromyalgi" by Lidija Praizovic?, a text that actively work with the internal production of different exteriorities.

This report is intended to give an insight in the Network Performance Assessment Modeland the parameters that is needed in the making of a fictitious grid that represents anoptimal grid. A main goal is to investigate how the construction of a real grid iscompared to the fictitious.One of the key parameters is how redundancy is treated in the model and to find theoptimal amount of redundancy versus the costs. Further is the dimensioning of the grid ofinterest. The fictitious grid is based on energy whereas the real grid often is based onsubscribed power and these two principles are compared and analyzed.The difference in the outcome of the model result due to variations in input data of themodel is also discussed in the report..

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

Whiplash is a bodily injury, where the person that is injured is subjected to force towards the neck, mainly in traffic accidents. Even low speed accidents can cause severe damage due to the complicated muscle and nerve structure of the neck. Symptoms range from neck aches and headaches to numb fingers and this makes the Whiplash injury difficult to diagnose. Whiplash is also a treacherous injury due to the fact that the symptoms can not be objectively verified. The principal symptom of the injury is pain, which is to its nature highly subjective.

This master thesis project is a part of a project called ?Järboprojektet? at the regional board of forestry, the district of Gästrikland. The project will give answers to questions regarding if an analysis of satellite images can be used to contact and inform landowners of the located areas where precommercial thinning is useful. The whole project is a part of the National Board of Forestrys IT-stake where the analysis of satellite images will, at the latitudes possible, be adapted to each district in purpose to identify these areas in need of precommercial thinning. This master thesis project is based on a field inventory of identified objects where precommercial thinning is useful.

1st of may 2003, a new energy system based on electricity certificates, was initiated in Sweden. The purpose with this system, is to stimulate an enlargement of energy production from renewable sources. The electricity system, ist built on that the producers of energy from renewable sources confer a electricity certificate from the government for every produced MW energy from renewable sources. The electricity certificate is supposed to be turned over and with that generate reciepts to the producers. Furthermore there is an obligation for the energyusers und energysuppliers, that means that the users and the suppliers every year the 1st of april got to have electricity certificates in proportion to their energy consumption during previous year.

3nine has developed oil mist separators for the manufacturing industry. They are used in factories and workshops in Sweden as well as many other countries. The basis for this thesis is to investigate the performance of these separators in applied environments under different circumstances and to find factors that influence the performance. It has been shown both theoretically and in laboratory environments that the sizes of the particles in the oil mist influences the performance of separation. This is to be verified under applied circumstances as well.The separators also have in most cases, after the centrifugal separation, HEPA-filters mounted that separates the remaining oil mist.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

This report describes the work and the results found when comparing three different 3d modeler applications. The programs are 3ds Max, Maya and Cinema 4D. The comparisons focus on the possibilities/the amount of freedom these programs interface offer to its plugins. The comparisons are made from the point of view of a tool for creating animations developed as a plugin for these modelers. This plugins demands on the system it is loaded into have been analyzed and from the results of this analysis a template have been created.

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

Husqvarna AB operates two warehouses located in the area of Jönköping. The most important task is to manage the large volume fluctuations during the peak season. DHL Exel Supply Chain (DESC) run the warehouses and the domestic transportations is outsourced to DHL Express. A number of forwarder agents are responsible for distributing the export gods. In the present situation a bottleneck occurs at the warehouse loading section, and the consequence is fulfill the time of delivery for all customer orders.

There are two objectives of this study.The first one was to study the new instrument Deltack fromPrufbau, and with the new knowledge, study the interaction between blanket and paper.Deltack is a new instrument to measure the ink splitting force. Blankets from an earlier study doneby GATF have been montered on 12 different Deltack print forms and those have together with Deltackbeen the base for this project.This study together with information from GATF?s study shows that some of the blankets have ahigher capability to adsorb ink. Those blankets generate a sharper shape on the force curve, they havea lower dot gain, but they print not as good solid..

This work describes a series of glasses, both for people withvisual handicap, and the glasses are not only limited for use onlyby people with poor sight.I have, based on the course Senses, done research and lookedinto how to design glasses for visual handicapped people interms of function, look and expression.I have elaborated with several different glasses and performedmany experiments to come up with my final result, consisting ofa series of glasses.The glasses in the series are made with a weight on one side, onestep on the bottom to get the possibility for the glass to tilt over,which enables you to both hear and see when you have reach acertain amount of substance in the glass.It has also been important for me that the glasses express somethingand get an individual identity.The result became glasses for whiskey, coffee, shots and mullwine..