The aim of this paper is to examine the layout of public spaces and its effect on human behavior with focus on the relation between pedestrians and cyclists movement patterns in a specific path. The study emanates from the security aspect of pedestrians and cyclists, and builds upon previous theories and empirical studies about perception, security, information design, environmental psychology and behavior. The result shows that individual behavior and movement pattern differs with age, purpose, physical- and other conditions, and layout of the surroundings. A design proposal for improved layout of a path and a node between different oncoming paths has been developed to aid the users? needs, where a separation of walkways and bike lanes forms zones of security for the purpose of better orientation and a better flow between the users..

This thesis applies to a novel steam expander, one part of a steam engine system, a wobble plateengine. The piston in the expander moves axially with the outgoing rotating shaft and is locatedon a plate, why the engine type is called axial engine. When steam is applied to the plungers theplate wobbles creating a rotation on the shaft going thru the wobble plate. The steam expander issupposed to be used in exhaust gas recovery (bottoming cycle) applications and small scaleenergy production. The commissioner is Ranotor Utveckling AB.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

This bachelor thesis argues for consumers' views on origin labeling effect and their willingness to pay for goods with this kind of label. The purpose of this study is to analyze the factors that influence and to measure willingness to pay for a national origin labeled product previously only competeing with a less expensive conventional product, when a further regional product is introduced in the purchasing decisions of consumers. This is achieved by testing whether Simonson's (1989) theory of the compromise effect is applicable to increase consumers' willingness to pay for eco-labeled food products. The factors affecting the willingness to pay; trust in eco- label, opinions about the products of their own nation and the surrounding region. Furthermore presents theory about what underlying the consumer consumption choices.In order to achieve credible results 240 respondents have participated in a questionnaire survey.

Disinfection methods for drinking-water produced at the two water works of Stockholm Water Co are compared in this study. Three different nethods are compared; disinfection with chlorine gas, disinfection with sodium hypochlorite and disinfection with UV-light and monochloramine. The method used is Life cycle assessment, LCA. LCA is defined as the compilation and evaluation of the inputs, outputs and potential environmental impact of a product system shroughout its life cycle. The environmental burden is compared for the three different disinfection methods.

Vaccinology is an ever expanding field. As a member of the veterinary staff it is important to stay up to date with the continuous new scientific data and recommendations that affect the care that our companion animals receive at the veterinary clinic. This paper presents adverse vaccination reactions, their cause, risk factors and suggestions how we can minimize the risk of adverse vaccine events in dogs. Dog owners in Sweden were allowed to answer a questionnaire about adverse events following vaccination. Lethargy, edema and pruritus were among the most frequently seen adverse effects.

In order to increase the independence in everyday life of the elderly population, we have developed a lifting aid for loading in the private car trunk. Independence from outside assistance affects self-esteem in a positive direction and can help increase the quality of life for a large group of individuals. As people age and experience changes in performance, it is important that aids and support is available, particularly to reduce the experience of aging and it?s increasing physical limitations. The aim was to develop a function prototype characterized by simplicity, which facilitates loading of the private cartrunk.The project was conducted at the request of Autoadapt AB, which is one of the leadingactors in car adaptations for individuals with disablilities.

The Swedish government has set up the overall goal that no net emissions of greenhouse gases can occur after 2050. A sub-target has been developed for road transports which states that the use of fossil fuels must be reduced with 80% to 2030 in order to be completely abolished to 2050. A public inquiry mapping how this can be achieved was handed in to the government late in 2013. The use of alternative fuels for road transport, both biofuels and electricity, is expected to give the biggest contribution to the reduction of the use of fossil fuels. The inquiry sets up a number of goals for how much the use of alternative fuels must increase to 2030 in order to reach the overall goal and which instruments that are needed in order to do so.The aim of this thesis is to evaluate how these goals can be reached and what the most likely obstacles that may hinder the reaching of these goals may be.

This study takes place within a publicly owned art producing organization and dwells on the problems of a change process that the organization was involved in. Both leaders and staff were disappointed by the way the change process had developed. The management team explained the outcome by referring to the uniqueness of working with artists who constantly put their own personal objectives before the benefit of the whole. The aim of this study is to find a complementary explanation to the one the management team provided us with; an explanation that can help in the understanding of the dynamics of a change process. Can perhaps theories on information, communication and change processes give an alternative explanation to why the change process faltered? To investigate this, we have used a qualitative single case study.

Within telecommunication and routing of tra?c in IP-networks a protocol named?Open Shortest Path First? (OSPF) is widely used. This means that a server dealswith the routing over a network with given weights by calculating shortest paths touse for routing. If we assume that a desired tra?c pattern is given the problem isto ?nd out if it is possible to set the weights so that the desired tra?c pattern is apart of a shortest path graph.

The energy sector is facing an impending paradigm shift. Today?s technology enables the end-user to generate their own energy locally at home. Furthermore, recently developed storage technologies make it possible to balance energy demand with stored energy and integrate district heating with the local power grid. This means that in the future heat and electric power will interact and energy flows is converted over energy boundaries.

This is a 20 credit Master thesis within the landscape architecture education at the Institute for Landscape Planning at the Swedish University of Agricultural Sciences at Alnarp. Norränga is situated on the fringe of the city of Lund, east of the existing district of Linero.The city planning office of Lund municipality has come up with a ?in-depth comprehensive plan? for the exploatation of the eastern area of Lund. The plan concerns an area of 1035 square kilometre which contains at least 1500 nya buildings, two schools, primaryschools, stores and bus station for local bus traffic and the new bus line - Lundalänken. The townplan is inspired from the historical Square block city with defined street system. The municipality has visions of what the green areas should consist of.

In January 2005 large forest areas in south Sweden were severely damaged by storm. This final thesis describes the work with creating an ecological and landscape-adapted regeneration plan for a severely storm damaged property in Kronobergs region in south Sweden. This regeneration plan, in difference to more regular plans, are focusing more on the owner?s use and goal?s for the property and seeing the property from a more comprehensive view in the regeneration process. Beside production and environmental values the plan also take in consideration other values as aesthetic, culture history, landscape picture and recreation values.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

Aim: The aim of the study was to investigate 1RM and what power could be generated in bench-press and half squat concentric at certain percentages of 1RM. Special interest was put to evaluate men (M) and women (K), strength trained (ST) verses non strength trained (EST) in generating absolute power as well as power relative to 1RM.Method: In total 59 subjects mean (± SD) age 24.9 ± 4.1 years divided into four test groups: 20 male non strength trained GIH-students (EST M), 20 female non strength trained GIH-students (EST K), 10 male strength trained - sprinters on national/regional level (ST M), 10 female strength trained - sprinters (ST K) on national/regional level. They did two tests on 1RM and power in events of concentric bench-press and half squat in a Smith machine. In the first test session 3 ? 5 lifts were made to measure 1RM in each event.