This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

This research study constitutes a critical stand, which departure from the increase in welfare, and decrease in quality of life, and is further directed to the sphere of consumption. Contemporary consumers appear to seek for components to construct their self with through consumption, consumerism has become a sphere of life, and has consequently also become a victimizing force steering the identity and self construction of consumers. The alarm bells however are echoing in Western society, and consumers are experiencing dilemmas such as fragmentation, powerlessness, uncertainty and meaninglessness.In this respect we have presented spiritualism as an applicable path of escape or alternative to the scheme of the material oriented consumption sphere. We intend to broaden the scope of the interplay between spiritualism and consumerism in the act of yoga, and we have therefore been researching: what yoga is doing to consumers, and what consumers are doing to yoga. The study is based on an existential epistemology paradigm, which emphasis on the meaning of the yoga experience attained from the subjects of research; the yoga practitioners, and therefore we have carried out three focus group discussions.

The IPv6 protocol offers with some new functions, one of them is auto configuration. With auto configuration it is possible for nodes, i.e. hosts and routers, for automatically associated with IPv6 addresses without manual configuration. Auto configuration it is another protocol as it uses Neighbor Discovery protocol (ND) messages (ND is mandatory in the IPv6 stack). The main purpose of ND is that nodes can discover other nodes on the local link, perform address resolution, check that addresses are unique, and check the reachability with active nodes.There are exactly the same vulnerabilities of IPv6 as IPv4 and is now exception, ND if not properly secured.

Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.

The new Library Act came in force in January 2014, external changes such as globalization and information technologies had changes the way libraries work and the new law aimed to reflect this. The aim of this study is to examine ideas surrounding the mission of the public library as it appears in the referral statements that three state agencies and three interest organizations gave to the ministry publications series Ds 2012:13. The questions this thesis examines are: what ideas can be discerned in the respond-ents' opinion regarding public library's mission? How is the con-sultation bodies? way of looking at public library's mission to-wards the government's approach? In this thesis the empirical ma-terial has been analyzed using a theoretical model called The four spaces ? a new model for the public library designed by Casper Hvenegaard Rasmussen, Henrik Jochumsen and Dorte Skot-Hansen. The model consists of four different goals and four differ-ent spaces and can be used as a basis for discussions about the public libraries role in society.

Nuclear power production carries potential risks both for the environment and for the work force. Different safety measures are employed and they stem from local rules as well as from regulatory authorities. This work describes the development of a safety promoting tool at Forsmark Power Plant, one of Sweden?s three Nuclear power plants. We describe the development of a computer based system for Pre-Job Briefing and Post-Job Debriefing.

 The aim of this essay is to examine if the Swedish Major labels are moving towards making their catalogue available on different platforms rather than their traditional distribution of music. The new technology has really stirred things up for the major labels and file-sharing has been a problem for a long time. The labels have a history of fighting new formats instead of embracing them and listen to what their consumers actually want. We have found that the majors now are in the leading edge of music distribution due to technology and that is a first. We have focused this essay on if the consumption of music has changed the distribution of it or the other way around and found that people have changed their ways of consuming music over the years and the labels have always been forced to adapt.

This paper has evaluated a new type of prosthetic foot, X-Balance, which aim was to facilitate the performance on uneven ground for the user. This study have performed gait analyzes with three prosthetic feet, the X-Balance, Flex-Foot and assure Ottobock9192 on flat and uneven surfaces using 3D analysis system QTM (Qualisys Track Manager) and associated force plates. During the project a prototype of a design that can perform a mechanical gait were manufactured. The prototype has then been used to fulfill the purpose and objective of this study which is to make different final sets that demonstrate differences between prosthetic feet. Gait analyses of individuals have also been performed to get an idea of what normal gait is.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

The purpose of this dissertation is to create an understanding of how a personal idea in the mind of an entrepreneur becomes an outspoken vision in one biotech company. More specifically, for what purpose the vision is used at different stages, how it is communicated, its content and what impact previous visions have on future vision work and in order to reach a deeper understanding of how vision develops over time and how it is used we have employed a qualitative approach based on a case study. The theoretical framework starts with the concept of vision and related concepts. Furthermore, the entrepreneur?s and manager?s usage of vision is examined.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

This thesis is a cultural theoretical case study of the art project (O)önskad samhällsförbättring.Via an analysis of the project, that is based on theories of power, resistance and contemporaryurban development, it examines the construction of urban space, its impact on public art including the ability of art to initiate evolvement of the urban public space.The last decades art has plaid an important role in what is called the creative city; to become attractive nodal points of the global economy, larger cities increasingly invest in art,culture and creative industry. Simultaneously the urban public space is limited to activitiesand expressions of art that are presumed to create economic growth. This introduces animpression of what is allowed and what is not allowed, possible and not possible, wished andnot wished which, as a consequence, evolves the public space. The events during the artproject and the reactions that followed enlightened these limitations. This tells a story, not only about the structuring process of the local urban space, but also important changes that are created as a simultaneous effect at different levels in society, as well locally as globally.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

Fleets have the ability to affect an adversary?s use of the seas for transportation. Nations have in numerous occasions exercised this power in order to ravage their opponent?s trade in times of conflict with the purpose of diminishing their military might. Great naval thinkers like Mahan and Corbett have described this use of seapower during conflicts in great depth but theories regarding the use of seapower to affect a nation?s peacetime economy in order to achieve limited political goals is lacking.

Business incubation is an important force of economic development but relatively unheard of in organization theory. This is partly due to the fact that in organization theory, meta-organization or the organization of organizations has been neglected or left lagging as much theorization has been focused on organizing individuals. With the growing number of business incubators, and meta-organizations in general, the need for understanding a relatively new type of organization is prevalent.This case study of the business incubator Global Business Labs Botswana (GBL) aims to clarify the organizational differences among meta-organizations and traditional organizations on a case level, as well as explain the underlying factors for these dissimilarities. With respect to the nature of this case study no general conclusions are drawn from the results. The inference, however, is that the organization of GBL and its incubated companies differs from the traditional organization in five elementary aspects: the weak hierarchical structure, the operational autonomy of its members, the strong focus on recruitment processes, the member identity and the lack of formal sanctions.