This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

Antalet programvaror ökar för varje dag och människor använder dagligen en mängd olika sorters programvara både på datorer och på andra enheter. Det finns idag programvara som kallas för fri och öppen programvara som tar upp kampen med gamla klassiska proprietära programvaror. Öppna och fria programvaror släpper sin källkod helt fri så användaren själv har möjlighet att göra ändringar i den programvara som används medan proprietär programvaras källkod är skyddad och hemlig. Dessa tre olika sorters programvaror jämförs och diskuteras utifrån tekniska likheter och skillnader i denna kandidatuppsats. Syftet med denna kandidatuppsats inom informatik är att undersöka vad privatpersoner som är tekniskt intresserade har för tankar och attityder kring proprietär, öppen och fri programvara och visa vilka tekniska aspekter som prioriteras vid val mellan dem. I undersökningen har ett kvantitativt angreppssätt bestående av en webbenkät som besvarats av privatpersoner tillämpats. Resultatet från denna enkät har tillsammans med den teori som insamlats visat vilka tekniska funktioner och skillnader som påverkar en privatperson då val av olika sorters programvara ska ske. Undersökningen har visat att det som användaren prioriterar högst i en programvara är användbarheten som handlar om hur användarvänligt användargränssnittet är och hur lättanvänd en programvara är.

Choosing the right user experience evaluation method can be difficult, choosing the right one for mobile user experience can be even more so. One major cause is that mobile usage is context dependent. Another contributing factor is that there is not one widely adopted theory or framework for user experience due to its complexity.The purpose of this study was to evaluate an existing method artifact in its feasibility for evaluating mobile applications. The chosen method, AttrakDiff2 is a self-reporting semantic differential questionnaire to evaluate the user experience of an interactive product, based on its hedonic and pragmatic qualities.A study was conducted where the participants assessed one mobile and one web application, which were later rated with AttrakDiff2. The completion of the questionnaire was conducted as a think-aloud session subsequently followed by an interview.The results suggest that the participants experience was affected more by the evaluated application style than the different platforms.

This bachelor thesis aims to investigate how social workers in Uppsala describe their procedure when investigating applications for housing assistance (i.e. boendestöd). Boendestöd is a specific type of services for people with disabilities, which aim to assist them in their lives. This welfare service is one of many regulated by the framework legislation that is the social services act (SoL 2001:453). Previous research indicates that civil servants who make decisions based on goal-oriented framework legislations like SoL, have a great freedom to act when they make judgments and decisions.

This master thesis has been carried out at Scania R&D at the department of Powertrain Control System Development during the winter 2011/2012. The purpose of the thesis was to produce a method that with the result of troubles codes from the field testing would be able to say something about the maturation of a component, in this case the VGT, variable geometry turbocharger. To start with, it was necessary to investigate hich information was available. After the information been summed up in tables and charts, this so that it was possible to understand the huge amount of data, the calculations started.Since the thesis was about maturation of a component the proportions were calculated of components that had a trouble code in contrast of those who passed the test without a trouble code. This Thesis includes background information about basic of statistics and about the company Scania and its testing process.

Energy losses are an essential part of a power grid company?s costs. From anenvironmental and economic perspective, it is important to reduce these costs. Toknow where efforts should be deployed, it is important to have good knowledge ofwhere in the network losses are situated. When creating network tariffs, there is alsonecessary to have a correct distribution such that the network customers that use acertain part of the network, only pays for the network losses in this area.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

 We have chosen to write our thesis within a transport company. The work was carried out at DHL activities in Uppsala. DHL is one of the leading transport companies worldwide. Our interest lies in more efficient and advanced transportation and terminals, as globalization and new trends require effective solutions.The aim of our work is to explain the need for information technology applications in road haulage and associated terminal operations. Furthermore, we analyses terminal and applied information technology.

ABB and Prevas have initiated a collaboration to sell a system to optimize steel industry furnaces, called FOCS. The purpose of this thesis is to investigate possibilities for integrating Prevas FOCS and ABB 800xA.The result of the investigation is used for an implementation of a prototype of the integrated system. The study shows a general method that can be used when implementing two software systems. The prototype of the integrated systems is made with usability principles in mind. This is a very important aspect in order to create a good working environment for the operators of a steel plant.

The aim of this thesis was to investigate the accessibility and activities for dyslectic adults in public libraries in the Swedish county of Södermanland. The questions that were to be answered were four; to what extent do the libraries provide book material and special computer software? To what extent do activities occur? Does the library staff have awareness and knowledge of dyslexia and of activities for dyslectics? What are the obstacles for good service for dyslectic library users? Two methods were used. As a first step, a questionnaire was sent to thirty public libraries. The questionnaire elicited a low level of response, but gave in spite of this an overview of the situation for dyslectics in the libraries of the county.

The aim of this study was to investigate the individual meaning of experiences of migration and day-to day life experiences before and after migration, of women that had migrated from the Middle-east area to Sweden. This was to be done with a psychological health perspective looking for stressors and salutogenic factors. A phenomenological approach was used. Eleven women where interviewed with three open questions on a trajectory theme. The analysis was supported by software Sphinx Lexica and software MCA-Minerva.

With the advance in computer and network technologies, multimedia systems and Internet applications are becoming more popular. As broadband network is prevailing, more clients are able to watch streaming videos or to play multimedia data over the Internet in real-time. Consequently, there is an increasing demand in the Internet for streaming video systems. As the run-time environment of such applications tends to be dynamic, it is imperative to handle transient overloads effectively. The goal of this work is to develop an algorithm that would provide a robust and controlled behavior of the video system so that important data is delivered on time to the video clients.

The aim of this thesis is to establish a ?förvaltningsplans? template to Fastighetskontoret in Vasteras city. Further general information about the mission was given at our first meeting with Rolf Haraldsson, who happened to be our mentor and works at Fastighetskontoret in Vasteras city.We agreed that using the software Excel was the most appropriate way to establish the template, because Fastighetskontoret also make use of Excel in their internal system, and also because Excel has a more friendly user interface and it is more easier to use compared to other software that have complex templates.One of the first things we did was to get in contact with different fastighetskontors around Sweden so that we could either take part of their ?förvaltningsplaner? or get referred to other material that could have been used. But this turned out to be an unsuccessful strategy.

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..