The purpose with this examination is to build a measureequipment to AerotechTelub AB (AT), who will registrate fault in SRAM-memory in contact with cosmic radiation. The equipment will be created around developcard from Memec Design with FPGA from Xilinx. The logic in the FPGA will be implemented with the hardwaredescribed language VHDL. The SRAM-memory that will be tested is build in CMOS-teknologi. The memorycells will be loaded with a predecided bitpattern.

Cultivable land is a limited resource and agriculture contributes to some of the most serious environmental problems facing the planet like, global warming, eutrophication and loss of biodiversity. The specialized, industrial agriculture with monoculture and extensive input of external energy, commercial fertilizer, and chemical pesticides are all essentially unsustainable. An adaptation to other methods of production is necessary to preserve the environment for future generations. The aim of this study is to describe the factors that distinguish sustainable from unsustainable agriculture. The results will be used to examine if and how the European Union (EU) works in order to create a more sustainable agricultural industry and to analyze the preconditions for such development.

I made this examination essay to investigate the possibilities and problems with machinery import. The rules intend to loaders and agriculture machines are still pretty flexible. It is today rather simple to make a registration or inspect those machines. There are still some practical problems to be aware of. It is very important to have the right contacts abroad, it is not always that you have time or moment to inspect the machines before purchase. In that case you have to trust your contact or partner about condition, equipment or working hours of the machine. Another important thing is payment before delivery: There is a huge risk that you do not get the machines that you paid for. If problems come up, you need to know the laws, your rights and your duties. A Swedish company does not pay any value-added taxes when it buys from another member of the European union. On the other hand must the machine be sold included value-added tax, if the buyer is a Swedish company.

The valuation of an asset is one of the most important thing with accounting, though one of the most difficult thing as well. However, in deciding useful service life for an intangible asset and property, plant and equipment, there are quite a margin for the companies, which creates a difference between companies and industries. When computing the value of the inventories there are a few possibilities available for the companies, which also can generate differencesbetween companies and industries. Although these differences can occur, there might be some similarities in the companies? estimates.

The valuation of an asset is one of the most important thing with accounting, though one of the most difficult thing as well. However, in deciding useful service life for an intangible asset and property, plant and equipment, there are quite a margin for the companies, which creates a difference between companies and industries. When computing the value of the inventories there are a few possibilities available for the companies, which also can generate differencesbetween companies and industries. Although these differences can occur, there might be some similarities in the companies? estimates.

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

There is an uncertainty in the market for grain forcing the meat/milk producers to review alternative feeds to a larger extent, in order to get control over the feed costs. This has led to that the meat/milk producers need to have a good knowledge regarding how the different feeds influences the animals and which technical equipment to use for handling. For those that produce their own feedmix, there is a need to put interest in new crops and their characteristics to be able to get the knowledge of what is required for their own production. It is beneficial to keep an open dialogue with advisors to be updated in new crops and new technology for feeding. When mixing feed at farm level, the legislation is not very clear since it the target group is large scale mixing plants. We have brought up the most important rules and regulations from the EU parliament Council as well as the ones from the Swedish Board of Agriculture (SJV), regarding feed mixing on farm and factory level. We have studied beans and pea at two different moisture levels, in order to evaluate how the moisture level affects the distribution of particles when milling with a plaitmill and a hammermill.

When traffic in large cities increases, it becomes more vulnerable to disturbances such as accidents, stalled vehicles or construction; therefore, traffic jams are more likely to occur. For better control of the traffic at a disturbance the Swedish National Road Administration (SNRA) has traffic equipment which can be controlled from a command centre. This traffic equipment consists of gates and signs with variable messages. This report will discuss the system used for traffic control in Stockholm. It will present proposals designed to improve it.

Hypothermia during anaesthesia is a well-known phenomenon that may cause several side-effects such as greater risk of postoperative wound infection and increased risk of heart complications. The most efficient way to avoid this is to prevent hypothermia from occurring. The aim of this paper was to compile the research on the most efficient way to prevent hypothermia during anaesthesia for cats and dogs, and to compare these results to how Swedish animal hospitals prevent hypothermia today. To investigate this, a survey was sent out to several animal hospitals around Sweden to see what methods they used to prevent hypothermia in their clinics. It is difficult if not impossible to prevent the body temperature from falling slightly when anaesthesia is induced because of the drug interactions in the body that follow from the drugs given. A 1-1,5°C decrease in body temperature is to be expected and is difficult to avoid.

Too high levels of noise lead to various health problems and cost society billions of SEK peryear. In this thesis we have examined a model of the A40E articulated hauler at VolvoConstruction Equipment in Braås. We have tried to reduce cabin noise in an articulated hauler,while also providing a way on how to proceed with a machine when the cabin does not measureup to the sound requirement. The best way to find leaks were with a reference source of model4205 and its speaker HP 1001 from Brüel & Kjaer in the cab and then walk around and listen towhere the reference source was more prominent. In this way, we found that the edges and theplugs were sensitive areas.

Abstract In high voltage substations there is an increasing demand for computerized equipment, and automation of operation and supervision. The future primary equipment will provide the possibility to collect more information and to provide better control for improved effectiveness. Since ABB has got a large customer target, each product must be custom made to fulfil the customers (often from different countries) demands. Later these products will be configured by engineers who may not be familiar with the tools used at ABB. This is a very expensive and time consuming.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

Title: Lobbying in the Swedish parliament - a qualitative study about experiences and attitudes of lobbying among the members of the Swedish parliament, from a communication perspective.Author: Bodil Hassel and Kristofer PerssonTutor: Emma SvenssonPurpose: The purpose of this thesis is to study lobbying towards members of the Swedish parliament. We aim to study their point of view: what experiences and attitudes they have towards the phenomenon. Key questions to be answered are: What experiences and attitudes do the members of the Swedish parliamentary Committee on Environment and Agriculture have towards lobbying? What skills does a successful lobbyist possess, according to the members of the committee? How do the organizations Skogsindustrierna and Naturskyddsfo?reningen lobby?Method/Material: The material used in this study consists of interviews with nine respondents of the Committee on Environment and Agriculture in the Swedish parliament. Additionally, two informant interviews with the organizations Skogsindustrierna and Naturskyddsfo?reningen were made.

This degree projekt deals with Skanska´s safety at the construction site with focus on personal safety equipment. The purpose of this dissertation is to examine how the rules of personal safety equipment are applied and experienced at Skanska´s construction sites.In October 2004 Skanska started a projekt to make the construction sites more safe. With use of a questionnaire we have made a survey at different construction sites. 80 questionaires have been handed out to Skanska´s employees in the southeast region. While they were handed out we conrolled if the employees at Skanska´s construction sites used head protection, easy visible clothing, safety shoes and identification cards.The result of the survey shows how the rules are applied.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.