Jag har som examensarbete på master-nivå formgivit en sittmöbel med utgångspunkt från min uppväxt i Dalarna. Målet har varit att göra en filosofisk tolkning av mina minnen samt en hyllning till regionen, i synnerhet Borlänge där jag växt upp.Jag har under projektets gång gjort en resa både på ett mentalt och rent fysiskt plan tillbaka till den plats jag växt upp för att utforska mina minnen och därigenom skapa en plattform för mitt designarbete.För att nå mitt resultat har jag använt mig av designmetoder som ITK, intervjuer, skisser, studiebesök, materialtester, mockups samt modelleringsverktyget Rhino.Resultatet är en stol inspirerad av saker som bland annat Ornäs stugan och musikkulturen i Borlänge. Stolen består av en metallkonstruktion, trädetaljer vid fötterna samt armstöden och en sits i läder.For my thesis work on postgraduate level, I have designed a chair based on my upbringing in Dalarna. The goal has been to make a philosophical interpretation of my memories and a tribute to the region, particularly Borlänge where I grew up.During the project I have made a trip both on a mental and physical level back to the place where I grew up to discover my memories and thereby creating a platform for my design work.In order to achieve my result, I have used design methods such as ITK, interviews, sketches, field trips, materials testing, mockups and the modeling tool Rhino.The result is a chair inspired by things like Ornässtugan and the music culture in Borlänge. The chair consists of a metal construction, wooden feet and armrests and a seat made from leather..

The goal of this thesis is to investigate the W3C Geolocation API from a developer?s perspective, focused on whether it makes development of location-based applications more accessible to developers. This has been investigated by looking at available ways to locate, possible uses, the functionality offered, the necessary level of prior knowledge needed for a developer and requirements on developer tools. This has been achieved through studies in relevant areas, a thorough introduction to W3C Geolocation API functionality, and by using the API to develop two different location-based applications as a demonstration. Testing of applications, on different platforms and in different environments, in conjunction with investigation of the rest of the material has shown that W3C Geolocation API in many ways actually makes development of location-based applications more accessible for developers. The API also provides fully adequate functionality and quality to meet the requirements for development of both simple and very advanced location-based applications. Målet med denna uppsats är att undersöka W3C Geolocation API ur ett utvecklarperspektiv, fokuserat på om den gör utveckling av positionsbaserade applikationer mer tillgänglig för utvecklare.

Det finns två stationer på Boxholm Stål AB med produktionssågar. Den ena är en bandsåg och två fasmaskiner med hanteringsutrustning för transport mellan såg och fasar samt en automatisk buntmaskin. Fasarna på den stationen är utslitna och håller inte de toleranser som Boxholm Stål AB har på sina produkter. En önskan att kunna planfräsa ändarna har också tillkommit vilket utrustningen i dagsläget inte klarar av. Det innebär att fasarna ska bytas ut.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

This master thesis is commissioned by Permobil AB. The report describes thoroughly the developing process of an adjustable backrest for wheelchairs. The target group for the backrest are people that suffer from scoliosis or other spinal diseases. Because of insufficient pressure distribution usage of traditional backrests is not an option for them.The current solution has got a frame that is made by several adjustable links that is held in place by friction. Between the links velcro tapes are attached that is adjusts the depth.

Ever since Internet revolutionized the world, e-stores and e-commerce has grown into becoming a natural part of consumer's everyday life. Much thanks to it's facilitative and time saving characteristics. Online, consumers are provided with a huge assortment and the opportunity to shop any time they like. Yet, the absolute greatness of e-stores is the possibility to push prices below the physical store price, which seems to be most appreciated to a large extent by consumers worldwide. The fact that e-store sales in Sweden grew 14% last year verifies this.As more players step into the virtual world of e-commerce the competition gets tougher.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

Throughout many years there have been discussions within the European Union (EU) regarding harmonization and improvement of accounting rules for companies with listed shares or other securities. The ambition exists to adopt, the within the union applied accounting standards, to those applied globally. These discussions lead the year 2002 to adoption by the council and parliament of international accounting standards (IFRS). The ordinance meant that all listed European companies have to adopt international accounting standards, accepted for application within the EU, for their consolidated accounts.During July 2003 the Swedish Government Official Reports issued a report (SOU 2003:71) stating, among other things, the differences and oppositions of implementing IFRS on a corporate level in Sweden, since corporate disclosure is regulated in Swedish law by Bokföringslagen (BFL) and Årsredovisningslagen (ÅRL). One of the main obstacles for the full implementation of IFRS is that a company?s annual report underlies the governmental taxation and an implementation of IFRS would affect this balance.

Denna rapport handlar om en användbarhetsutvärdering av synthesizern OP-1, utvecklad av företaget Teenage Engineering. Studien är kvalitativ och undersöker bara den omedelbara användarupplevelsen av produkten. Rapporten baseras på resultat från ett antal användbarhetstester, utförda på företaget i fråga. Användbarhetstesterna avser att undersöka hur en användare kan förstå hur OP-1:s kan användas och hur de kan förstår dess olika lägen och vidare på vilket sätt detta påverkar den initiala användarupplevelsen.Totalt nio av fjorton tillfrågade personer har ingått i användbarhetstesterna. Urvalsgruppen bestod av personer med tidigare, dock varierande mängd, erfarenhet av synthesizers.

Fast pyrolysis is a method for converting biomass into three energy rich products: char, gas and bio-oil, where the latter is most interesting.  Pyrolysis is an endothermic process where biomass is heated in an anaerobic environment and, with the right operating conditions, up to 80 %wt bio-oil can be extracted. Key parameters for fast pyrolysis are: stable reactor temperature (~500°C), short residue time for gas in the reactor (<2 s) and a very high heating rate for the biomass. Today there are several different process solutions for fast pyrolysis, where fluidized beds and rotating cones are most developed. Bio-oil has compared to fossil oil: lower heating value, low pH and also polymerizes with time. Because of this upgrading is desirable for increasing competitiveness.

It is not uncommon for math difficulties and reading difficulties to occur simultaneously. Despite this, math and reading difficulties are thought to have different cognitive profiles where math difficulties are linked to number sense; an innate ability to understand, approximate and manipulate both quantities and numerical information, whereas reading difficulties are linked to phonological ability; an innate ability to understand, create representations of and manipulate phonological information. A possible link between the difficulties is that phonological abilities also could affect mathematical ability. Support for this comes from studies where comorbid math and reading difficulties are associated with more severe difficulties in arithmetic ability compared to those with isolated math difficulties. The purpose of this study is to examine whether isolated math difficulties, isolated reading difficulties and comorbid math and reading difficulties can be linked to deficits in number sense, phonological ability or both of these, and whether comorbid math and reading difficulties differ in performance in mathematical tasks compared to isolated math difficulties for children in second grade.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

In the last decades the Swedish labor market has been characterized by a stereotype perception on women?s role and position on the market. The perception speaks of the characteristics of female leadership as being less qualified causing the gaps between the two genders to transform into a gender segregated society. The historically slow progress has limited the career opportunities for women to reach top management. However the increasing discussions during the 21st century on how to reduce the gender differences in the labor market has made it more acceptable with women on higher positions.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

En organisation som vill reducera sina kostnader på lång sikt måste utveckla sina arbetssätt så att samma produkt kan skapas med färre resurser. Ett effektivare logistikflöde bidrar till reducerade kostnader och ökad lönsamhet för byggföretaget. Med flertalet interna och externa aktörer inblandade räcker det inte att byggentreprenören är individuellt effektiv, utan också effektiv tillsammans med övriga aktörer i försörjningskedjan. Därav krävs det för ett effektivt logistikflöde, fokus på både produktions- och materialflödet såväl som det tillhörande informationsflödet. Denna studie syftar därför till att ur ett ledningsperspektiv identifiera och beskriva problem kopplade till produktions-, material- och informationsflödet vid en byggarbetsplats, samt att identifiera åtgärder för att effektivisera dessa flöden.En fallstudie bestående av intervjuer och observationer genomfördes på Nåiden Bygg AB:s byggarbetsplats i Gäddvik, där produktions-, material- och informationsflödet studerades.