Abstrakt Produkten som jag har utvecklat är en mjukvarubaserad 3D-renderare. För att göra en sådan produkt är man tvungen att gå djupt in i området 3D och utföra alla beräkningar på egen hand. Dessa tar annars grafikkortet hand om. Denna rapport förklarar varför jag har valt att göra en egen mjukvarubaserad 3D- renderare och vad den är för något och i vilka områden den används. Här förklaras även min syn på programmering, digitala spel, vad programmering innebär för mig och hur min syn på spel har påverkat mig med tiden.

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging components during run-time.

Business Intelligence may help organizations in making the right decisions byproviding data for analysis which can be presented to decision makers. DataWarehouse which is a central part of Business Intelligence can be built in severalways but the methods presented by Ralph Kimball and Bill Inmons are considered thetwo main methods. The solution provided by Inmon focuses on integrating the entirebusiness into one large database using relational database development. Kimballhowever proposes dimensional database modeling by creating one or more data martsand integrating these using a data bus. Previous research has shown that the quality ofa Data Warehouse can be measured through critical factors such as data quality andsystem quality.

Introduction: Mental illness is a public health issue which 20-40 per cent of the inhabitantsin Sweden suffer from. Many factors can lead to mental illness and because of that it isimportant that different organisations and professions collaborate in prevention and healthpromotion work. To develop the collaborative process by noticing difficulties and successes,documenting, follow-up and evaluation is of great importance. Aim: The aim of this literaturereview is to investigate which methods are used for evaluation of health promoting anddisease preventive collaborative projects, which focuses on mental health directly orindirectly, and find out what results these projects has revealed. Method: Literature reviewwith descriptive design.

New energy resources that can replace petroleum diesel are needed and biodiesel may be an excellent substitute. During storage and use, biodiesel can oxidize and form peroxides, leading to degradation of the fuel. It is therefore important to determine the peroxide content of the fuel. In this thesis the triphenylphosphine method, which involves GC-MS analysis has been compared to the standard iodometric method which involves titration with sodium thiosulfate. Working standards were made to see how well the iodometric method worked and also in order to make a calibration curve in GC-MS.

This bachelor thesis discusses various difficulties with architectural paint research. The difficulties are exemplified through a case study ? a paint research on a furrowed string-course in the southern vault of the Royal Palace of Stockholm, which was carried out November ? March 2009-2010 on behalf of Statens Fastighetsverk. The paint research was made in order to receive information about the string-course and to get inspiration for a renewed color scheme on it. The base material of the string-course is Gotlandic sandstone and the surface of it is furrowed.

Recent years have been very turbulent for most private equity firms. Especially the financial meltdown in global economy has affected the industry, but also the public pressure has made private equity houses change their control strategies towards more conventional methods used in public companies. This thesis aims to put light on the control methods used in listed private equity houses which use a buyout strategy. The paper describes how the control methods change over the different phases the asset experience and how different value generating strategies use altered control methods. Using Merchant's (2003) framework for management control systems and Berg and Gottschalg's (2004) research on value generating strategies in buyouts the thesis shows that action controls as designing instructions for the board and a business plan, together with goal alignment is the commonly used control strategy directly after the acquisition.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

The purpose of this study is to gauge the current state of Swedish library and information science research. LIS is generally defined as a cross- or multidisciplinary subject, according to some coupled with heterogenity or dichotomy within the subject. In light of Jack Meadows?s description of the scientific community growth and scientific communication, the following two research questions are formulated as basis for the study: 1. What are the current themes, what range of theories and methods are used in our research material? 2.

By studying the forms of work and methods teachers choose for their teaching on the Business and Administration Programme and by examining the experiences gained by these teachers, I hope to gain a clearer insight into how the demands of national policy/governing documents are met in the actual teaching of the courses within the programme. In my qualitative study,teachers in a team from a Business and Administrative Programme have been my informants. The team combines multiple forms of work and methods in line with the intentions of the national policy/governing documents. Students usually have an unbroken school day with block teaching where they work with case studies and interdisciplinary  work. Morals and ethics are integrated in class.

This is a qualitative study with four interviews, in four different preschools, in the same municipality. By making it so, it becomes a case study to describe a phenomenon in a municipality which also is the definition for this investigation. The purpose of my study is to examine what it means, in a municipality, to have different types of introduction at preschool. Where I ask the question why preschools choose to have a specific method of introduction and what are the basics and ideas behind the choice of the method? What significance do these different methods have to attachment theory? What do teachers think about the advantages and disadvantages with their choice of method?The versions of introductions are many and may vary; the duration of the introduction may vary from 1-3 days up to 3 weeks.

Inom industrin är främsta skälet för kalibreringar att även de bästa instrumenten med tiden förlorar sin förmåga att ge noggranna mätningar. Med kalibreringsmjukvara som stöd effektiviseras kalibreringsprocessen och hanteringen av dess data. Instrumentteknikerna på Vallviks Bruk arbetar i systemet CMX Calibration Software av Beamex, och jag fick uppdraget att utvärdera dess användbarhet. Uppsatsen fokuserar främst på användarna och hur det upplever systemets användargränssnitt. Vidare skall utvärderingens resultat leda till förslag på förbättringar i systemet.

The student project Elba at KTH started in 2011 and is a project where a battery driven prototype car is developed. The vehicle competes in Eco Shell Marathon in Rotterdam, Holland. In this competition the vehicle that travels a certain distance including several starts and stops with the lowest energy consumption wins. To minimize the consumption is therefore very important, which requires knowledge of the vehicles energy losses.A vehicle's energy losses depends on several factors and can be divided into the powertrain efficiency and the driving resistance. The driving resistance can then be divided in to rolling and air resistance, if smaller losses like vibrations are ignored.

How do the police prevention methods work against juvenile delinquency? The purpose of this study is to see how the police work to prevent juvenile delinquency in two municipalities in Stockholm, Södertälje and Sundbyberg. Additionally, the purpose of this study is also to find out if there are any similarities or differences between the police methods the police use in these two municipalities. We have used qualitative method in which we have interviewed the police and young people from the communities. We interviewed young people to see their attitudes to the police and the area to find their perception of police work in the fields as well as the police forces attitude toward the young people.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.