This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis presents and evaluates a project, undertaken in 2001 by a librarian the writer of this thesis and a teacher. We met with a number of adults with reading and writing disabilities, and presented and discussed books and experiences of reading, with the aim to increase their joy of reading, as well as finding out more about our own ways of co-operating with each other across our professional borders. The documentation and evaluation emphasizes on the process and the results of the project, and on our own participation, by asking the following questions: How did we carry out the project? What obstacles did we meet? What went well/wrong? What did we achieve related to our goals? In order to illuminate the project from different angles, consequences of reading and writing disabilities for adults are discussed, as well as the specific nature of adult education and projects more or less related to ours. Action research is chosen as a method, because it allows the process of the project, and our own learning process, to be exposed.

Underhållningsbranschen är en bransch som alltid arbetat i projektform. Trots det finns det inte tillräckligt med empiriska studier på projektledning inom underhållningsbranschen, speciellt inte i Sverige. Många författare menar att de teorier som finns kring projektledning är för ensidiga och inte kan tillämpas på alla former av projekt. För att öka kunskapen inom projektledning behövs därför fler empiriska studier inom olika typer av branscher. Projekt i underhållningsbranschen är intressanta, mycket på grund av att de till skillnad från andra branscher oftast lyckas hålla tiden.

In this essay I consider a self-experienced dilemma, and review how I, as a preschool teacher, treat a child with special needs. With the support of literature and theory, I can, with an essay writing approach, reflect and analyze the dilemma. In this way I will examine my practical knowledge and personal experiences of a complex situation. I want to examine whether children with special needs who are included in regular preschool activities, really get the support they need and deserve. Do educators have the conditions and does preschool have sufficient resources to realize this? Do educators have sufficient knowledge of how children with special needs should be responded to? I want to find out how the included children's social development and self-image is shaped by the treatment they receive at the preschool.

In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.

Corporate Social Responsibility is a concept whereby companies integrate social and environmental concerns into their core business and in their interaction with stakeholders on a voluntarily basis. The purpose with our thesis is to study how Swedish insurance companies work with Corporate Social Responsibility and to analyse the underlying strategies of the companies? social, environmental and economical activities. We will analyse where, how and for whom value can be created with CSR. Where does the value creation take place, how can it be created through these activities and who will benefit from Corporate Social Responsibility? Theories point out that companies need to assemble and value the total package of benefits to be able to create successful corporate initiatives.

In the spring of 2006 a pilot project was initiated by The Rural Economy and Agricultural Societies of Sweden together with The Swedish Ornithological Society in order to increase collaboration between bird watchers and farmers. The project as a whole comprised 11 farms in South-Central Sweden. The aim was to benefit the decreasing populations of bird species related to the agricultural landscape. The purpose of this master thesis was to study how similarities and differences between bird watchers and farmers regarding opinions about nature, landscape, agriculture, birds and nature conservation have influenced the collaboration. Four of the farmers and five of the bird watchers that participated in the project were included in this study.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

This thesis examines source criticism and critical thinking among upper secondary school students in social science in three different schools in Sweden. Our particular focus lies in investigating the student's critical thinking skills and evaluation of digital sources when they work independently with different projects. How do students value and sort the information they find? We looked furthermore at what factors that may influence students in their evaluation of sources. Moreover, the purpose of this thesis to investigate how the student's critical thinking skills can be used as tools to become more information literate in a learning context.

In Eskilstuna and Sweden in general the level of reuse of surplus material containing soils and rocks from excavation is low. In this report the potential for increasing the reuse of excavated material in Eskilstuna by using a web-based earth information database has been examined. The purpose of a web-based earth information database is to connect those who have surplus material with those who need material for a fast and simple transaction. The intention is to give Eskilstuna a more environmentally and economically efficient handling of surplus material by increasing the level of reuse and thereby reducing the amount of surplus material that is wasted and emissions given off to the atmosphere during transportation. The potential has been examined in two different ways, by tracing information about a number of projects to see if excavated material driven to the dump could have been used in another project and by interviewing eight of the work leaders active in Eskilstuna.

Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements. There is a therapy model, called solution-focused therapy, used in family and individual therapy. The model focuses on solutions for the future instead of problems in the past.

In the nineties, policy makers highlighted the importance of creativity in education in order to nurture entrepreneurs in our society, thus the purpose of this study is to investigate high school students´ experience of creativity in psychology classes. The results are based on qualitative data from four semi-structured interviews with Swedish high school students who study psychology. The conclusions are that the respondents perceive psychology as a very creative school subject in which they can give personal experience as examples, they can give alternative explanations and solutions to problems, and that there are no right or wrong answers which means that they feel encouraged to self-reflect. The teacher is important as the respondents experience her as open, tolerant, and moreover, that she varies the classes, which contributes to a good classroom climate. The respondents also experience a certain degree of freedom when they feel involved and are allowed to influence their education.

Skanska is using work schedules that are specifically designed for employees in the production. These work schedules are called best practice. These are guides containing technical descriptions, design references, capabilities, etc. for work activities. This support function facilitates the work preparation and planning of future work.