This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced flow were implemented within the two chosen work tasks.

It has now passed two years since the new site- and construction law, PBL, went into force. It replaced the previous PBL applicable since 1987, and it involves relatively large changes in many different areas of the construction sector. The ambitions of the new law are for instance to simplify and clarify the legal text, increase efficiency in the permitting processes and improve the quality of construction. To achieve this, a variety of changes was made. Some of the most important are: inserted deadline in the processing of building applications, extended assessment of building applications, revised rules about controlplan and quality manager, a certificate is required to start and end the project, an additional meeting is inserted and the construction management of the municipalities will have to do a mandatory visit at the work scene.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

Logistics planning for a construction site is usually limited by traffic flow to and from the workplace. The geographical location of the construction site is determined by roads around the workplace and opportunities for well-functioning logistics. Inventory of material is often impossible because of the frequently small workspaces. As a result, a concern relating material handling remains . Even before the establishment of a construction site, it is required in the construction industry to eliminate errors that might arise in the planning stage.

Communication during the process of Environmental Impact Assessment: Interviews concerning three infrastructure projects Environmental Impact Assessment (EIA) is a method to describe the possible impact of a planned project. The aim of such an assessment is to aid a sustainable development, by supplying a comprehensive basis for decision-making. Today there are many people working with EIA in different forms, representing both different interests within the community, as well as having different individual points of view. The proponent is responsible for the EIA, but it is of interest to study the relationship between the different participants who are involved in this process. The aim of this report is to study how the different disciplines involved have communicated with each other and amongst themselves, what characterises good communication, and if anything should be improved.

The aim of this thesis is to study and compare to what extent Hypertext Markup Language (HTML) and Text Encoding Initiative (TEI) support bibliographic description, metadata and mark-up of textual segments. The projects in the study comprise the Norwegian The Writings of Henrik Ibsen (Henrik Ibsens Skrifter) which applies the use of TEI, and Vitterhet society?s The collected works of CJL Almqvist (Vitterhetssamfundets CJL Almqvist Samlade Verk), which applies the use of HTML. The study showed that the Ibsen project provides its text with bibliographic description and metadata to a greater extent than the Almqvist project. The Almqvist project?s texts are provided with certain information about titles, authors and also information about source material and the electronic edition.

The purpose of thesis was to investigate and compare how two companies within pharmaceutical industry and nuclear power industry are currently working with quality development regarding continuous improvement and Lessons Learned in business processes. In addition, a simple comparison was made with the automotiveindustry.McNeil AB are improving their processes continuously and are according to the findings of this report performing well in their pursuit of world-class pharmaceutical production. They have a well functioning process regarding improvements proposed in weekly improvement meetings engaging all employees. However, during interviews it was made clear that the functionality of the process which administer improvement proposals generated in addition to, or beside the weekly improvement meetings, were inadequate. McNeil AB is proposed to administer this through an IT solution instead of by paper and e-mail, that simplifies the process of adding, implementing and follow up an improvement proposal.The nuclear power plant Ringhals AB recently made major improvements in their business processes as well as the plant itself.

The projects goal was to make an already existing indoor positioning system useful forthe average smartphone user. This was achieved by creating an Android applicationwhich, along with a running server, continuously presents the user with all the currentneeded information. It uses the graphics engine andEngine to create the graphical userinterface. The application was created in the development environments Eclipse andAndroid Studio..

The purpuse with this work is to see if there is a possibility to buy a farm with a low amount of own capital. We have been doing budgets for five farms with different kind of productions. Some of the farms in this work are possible to buy with a low amount of capital but if you start without any money you will run into problems with the bank. The bank is not very pleased with fully financed projects; they would recommend an own capital of at least 10-20%. The farms with the best budgets were farms with animals..

In the end of the 80´s the area of system development moved into a new era. As a consequence many new methods and development models emerged which in many cases resulted in problems when choosing system development models and methods. As a result of these problems the today standardized modeling language UML (Unified Modeling Language) was created. UML is tailored to support many different types of projects. This is possible because of UML?s capacity to be adjusted and adapted to a specific company environment.The purpose of this bachelor thesis is to investigate how and why companies use UML and what experiences and opinions those who use UML have of using UML in practice.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Problem: How does project managing appear in small IT-consulting companies and how does the project manager carry out their projects to create successful solutions for their customers?Purpose: The research has the purpose to analyze and review how IT-consults in small companies work and lead their projects to create profitability for the company, which leads to a good development for the company.  Methodology: The research is made on eight research objects in IT-consulting business and the sizes of them are between 1-49 employees. The research is made with a qualitative method to get closer to the research objects. Therefore the research is made in forms of interviews. The analysis is grounded on a comparison between the research data and the theories that are used in the research.Theoretical perspectives: The theories which have been used in the research are Involvement theory (Fill, 1999), PAFF-metoden (Marcusson & Ahlin, 2002), Projektledning (Tonnquist, 2006), Jakten på det effektiva projektet (Engwall, 1999) och Mervärde (Grönroos, 2002)Empirical foundation: The research data are founded from the interviews of the eight research objects, they have the fictive names: Gondor, Minas Morgul, Minas Tirith, Mordor, Osgiliath, Rivendell, Rohan and The Shire. Analysis/Result: Each study object starts their projects with a pre-study phase, as the PAFF-method describes it.