AbstractThe purpose of this study was to identify problems that may occur in the execution of a civil engineering project and suggest measures to reduce the risk of errors. The study was conducted in cooperation with a civil engineering company in the Gothenburg area. During two weeks in February 2012, a field study took place on two construction sites where disruption and problems that took more than 15 minutes to correct were noted. During the field study we identified 39 such occurrences in the projects and then these were classified into different categories according to their cause.The two largest categories were "Design" and "Planning", which accounted for half of the errors that were discovered.In the study results were evaluated to decide whether it was possible to detect discrepancies at an earlier stage. The cost to fix an error in the design stage may be significantly less than to correct the problem in production.According to the evaluation, 55% of the errors could have been detected earlier if there was a greater degree of observation for such issues by everyone involved in the project.

Lean is a production philosophy which is about increased resource use while meeting customer requirements. The foundation of lean comes from Toyota and their production philosophy The Toyota Way. Professor Jeffrey k. Liker has worked with Toyota's production philosophy and Lean for a long time and has created a 4 P model and 14 principles that characterize the Toyota production system (TPS), which many sources refer to.The aim of my work is to study the working procedure of asphalt projects from sales to the laid asphalt with a focus on planning and production management. The goal is to examine how the lean philosophy can be applied in planning and production to simplify the flow of asphalt projects based on Likers model and principles.

This project explores how artificial landscapes as parks and squares above ground can save space by using the vertical voids in urban environments and how they can create spatial and social as well as ecological qualities and connections. Hybrid landscapes are a phenomenon of current interest within the field of architecture and urbanism. Architecture as surface, where facades and roofs become possible to tread, is a relatively recent occurence that has over the past few years become an increasingly common sight in architectural magazines and on international architecture exhibitions. Many of my selected reference projects have often been associated with sensational contemporary design trends generated by advanced computer software. But the phenomenon is also a result of other different currents of change that exist within today?s society, such as densified cities with a lack of open space, which is also expressed in architecture.

The work is performed at Forsmark Group AB as a final step in the Bachelor ofScience program in nuclear engineering at the University of Uppsala in 2013.The work is part of an ongoing process of streamlining project system model FKA.Streamlining the project model is an important aspect that affects all largecompanies that somehow have a project governing body when there is muchfinancial resources to save. Although the quality of the projects is positivelyaffected by efficiencyThe aim is to find possible common weaknesses and strengths of the project systemby interviewing a number of project managers, and using the systems in placeexamine the model.As part of the work also includes examining what project managers have to adjust tothe newly implemented system VPMM, and other newly introduced elements thathave been added to improve the efficiency in the futureProject System is a complex system that is influenced by many different parametersand participating individuals' attitude and personality. But then small changes in themodel could have major economic consequences.The thesis has generated results that show common weaknesses among the variousprojects and their project managers' general opinions about the project model. It alsopresents some possible solutions based on own thoughts and those interviewedobjects suggestions and comments..

The foremost objective of business organizations is to generate value for shareholders and to opt for strategies which optimize it. Hence it is of key concern for business leaders to appreciate how operations best are run to maximize value creation. This study explores how financial theory can reveal the link between one particular business strategy and the corresponding effect on shareholder wealth. The question in focus is whether construction companies can enhance their value creation by implementing shift-work to increase the weekly production rate. The thesis particularly targets apartment block projects in Sweden and has the construction company Peab AB as primary object of study.

AbstractThe concept project is today used in several contexts and has different meaning in different contexts. Lately, projects have been seen as a form of organization and more companies convert from traditional organizing to organizing in a project form. The purpose and focus of today?s project is not only to increase quality and competence development for management but also to integrate different actors in order to e.g. increase customer value.LänsTeknikCentrum AB (LTC) in Jönköping is running different projects in order to support companies in Jönköping County.

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

Purpose: The objective of this study is to illustrate how participants in leaderless based projects communicate with each other. Several studies have focused on technology-supported projects, such as open source projects, with an established project manager and goal. There is a lack, to the best of our knowledge, in studies that deal with the communication pattern in a leaderless computer supported collaborative project.Method: We have chosen to use a quantitative method where we systematically group several messages according to their content. This method was used in a similar study to illustrate the communication between participants involved in an open source project. We have taken the same Kripendorff based method and adapted it to our study by adding more descriptive variables.Theoretical perspectives: Manuel Castell discusses the aspects of a new communication power that is rooted in the individual as part of a larger creative audience.

This thesis has examined the Tekla Structures modeling software and answered the question of whether it could act as a suitable modeling program for the design department at Bjerking AB in Uppsala. The method used in this work is a case study of a previous project with existing basis to work form. The demarcation of the study was to examine only the usability of the foundations of in situ concrete. The work examined three main areas within the design process. The first was to model the concrete elements then to model the reinforcing and ultimately production of the drawings. Because Autodesk Revit was the existing modeling program in the Department conducted the evaluation as a comparison between the two programs.

This is a report on the development and implementation of the web shop ?Urballa Ur?, a web application developed by nine students at Linköping university. The report illustrates the methodology and process with intention to answer the question ?How can an online watch store be implemented to increase sales??. During the process the agile method scrum has been used as a working method.

This is a diploma thesis executed as a part of the examination of the educationalprogram Building engineer ? Construction management at Halmstad University. The aim of the thesis is to compare and evaluate conventional open-cut pipe-laying withhorizontal directional drilling. The thesis includes a comparison of the economic,environmental and time-based aspects of both methods and discusses which factorsthat determine the optimal choice of method.The study is mainly based on previous studies regarding the subject and oninterviews with professionals from the industry.A fictional project with five realistic cases of pipe-laying scenarios was compiled,sent to different companies for calculation, evaluated and compared. Our conclusionregarding when it?s suitable to use which method is entirely dependent on thespecific project.

This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

The Royal Library (KB) of Sweden harbours great collections of different objects through a special law from 1661. This master degree paper is exploring a part of KB?s digitisation of those collections. It deals with the questions about what the KB had chosen for digitisation, why those choices were maid and who is responsible for making these decisions. The paper will also for example seek out different patterns and trends in the information.

I ett historiskt perspektiv har leverantörerna försökt närma sig marknaden genom att en tätare relation med slutkunden upprättas. Eftersom dagens företag är hårt konkurrentutsatta krävs en effektiv försörjningskedja med leveranser i rätt tid och rätt kvantitet. Det krävs även att företagen har en effektiv lager- och produktionsstyrning för att tillgodose marknadens varierande efterfrågan. Plannja har under de två senaste decennierna försökt etablera sig på nya marknader genom att köpa upp befintliga bolag. Utökningen har inneburit att företaget har kommit närmare slutkunden och att försörjningskedjan blivit längre.