The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

Purpose ? The purpose of this study is to develop a work method to be used by manufacturing companies that are interested in updating which items that should be presented in the materials exposure. To fulfill the purpose an investigation has been conducted to decide which aspects are important to consider and how the aspects can be used to determine which items that should be presented in the materials exposure. Methodology ? To fulfill the purpose of the study, the method has been based on an abductive approach where theory has been layered with empiricism. The main method within this study has been a case study at Volvo Powertrain AB in Skövde with a materials exposure as the analytical unit.

Volvo Construction Equipment Components AB (VCE) har det globala ansvaret för utveckling och tillverkning av drivlinekomponenter inom Volvo Construction Equipment. Ansvarsområdet omfattar dieselmotorer, transmissioner, axlar samt fordonselektronik. I Eskilstuna produceras axlar och transmissioner till dumpers och hjullastare. För att företaget skall kunna vara konkurrenskraftigt i dagens dynamiska situation är det viktigt att ständigt förbättras och skapa förutsättningar för framtida förändringar. Den hårdnande konkurrensen på marknaden medför att tiden mellan nya produktmodeller minskar vilket medför att behovet ökar att på ett snabbt och kostnadseffektivt sätt ta fram prototyper.

The purpose of this thesis is to analyze the regulatory power, efficiency and impact of export control on Swedish arms export from the 1980s onwards, linked to the delegation of authority of permit license to the Inspectorate of Strategic Products in 1997. An increase in the administrative sector, based on a collective decision making process and established criteria and guidelines, aimed to strengthen the control of arms export to non-democratic and problematic states. In short, the aim of the study is to investigate and analyze whether there was a decrease in the arms export to problematic states or not. On one hand, it is reasonable to assume that the introduction of the new regulation entailed a more strict arms export policy. However, previous research has showed that regulations are sometimes not effective since incentives to breach these may be present.The study begins by examining the Swedish case and situation in terms of arms manufacturing and export, as well as the delegation of authority and legislation applied to the field over time.

Uppsatsen utgår från resultatet av Holmen AB:s medarbetarenkät Holmen Inblick 2011 i vilken 55 till 65 procent av cheferna uppgav att de känner sig delaktiga i mål, budget respektive verksamhetsplan. Enkätens resultat avviker från ledningens önskade utfall, vilket i uppsatsen omnämns som ett styrglapp.Studiens syfte är att analysera vad som orsakar ett styrglapp genom att klarlägga varför och till vilken grad chefer i Holmen är medvetna om, och kan påverka, mål, budget och verksamhetsplan. Genom att förstå detta kan de åtgärder som krävs för att reducera styrglappet identifieras av koncernledningen. Studien avgränsas till att analysera hur organisationens struktur, kontroll och kommunikation påverkar styrglappet.I studien används en kvalitativ intervjumetod där 17 chefer på två bruk i Holmens koncern har intervjuats individuellt. Därtill intervjuades platschefen för respektive bruk samt Holmens HR-direktör.

Textil- och konfektionsindustrin blir alltmer globaliserad och ställs inför hårdare krav då konsumenterna efterfrågar allt billigare varor i snabb förändring. Sedan flera decennier har europeiska konfektionsföretag flyttat sin tillverkning till länder med lägre arbetskostnader för att uppfylla kraven om låga priser som europiska tillverkare har svårt att uppfylla. En stor del har flyttats till Kina men även till andra länder i Asien. Nu håller marknadsförhållandena på att förändras igen genom tillväxt- och utvecklingsländernas starka utveckling. Förändringarna syns tydligast på Kinas marknad genom stigande priser och mindre kapacitet för europeisk produktion.

This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

The aim of this thesis is to describe the customer?s attitudes toward the contracting for availability, i.e., which factors are from the customer?s perspective necessary for the fulfilment of a supplier-customer agreement? Furthermore, the objective is to describe and analyse a supplier-customer relation in the Defence Industrial sphere.The present study has been carried out as a case study using an abductive approach. The thesis is based on a practical problem, i.e. which factors will be important to the customer when a contractor in the Defence Industry wants to increase its commitment of service, and how will their relationship change? The thesis is above all focused on generating knowledge that can lead to rapid and concrete measures and that can be used in the analysis of an increased industrial commitment but also as a case study of a problem of a more general nature in the Defence Industry.

Many companies with expansion plans may eventually need to take a decision whether tomove parts of the organization abroad or not. One example is how Swedish companies? placesits production in Asia where labor is cheaper, but at the same time wants to use Swedishengineers. The communication possibilities today makes it no longer necessary to travelacross the world to have a meeting, and questions can be answered in a matter of minutes.This means that a company that is spread out over the world still can communicate betweentheir employees.When participants in a project are spread out over the world, and can?t meet in person, it iseasy for problems to appear.

Since the Chinese economy?s reform in 1980, it has been attracting enormous foreign investments. Many Swedish firms from different sectors such as technology, manufactory production, consumer, service industries and so on, had started their investments in China. China has become the first choice for global manufacturing due to the huge market, continuous economic growth, stable political situation, sound investment environment and the WTO membership. In addition, China's enormous potential in finance, service, infrastructure, telecommunications, wholesales and retail industries will also attract a great deal of foreign capital.

During the last part of the 20th century many companies has started to build their organizations on knowledge and information instead of manufacturing of products.  Today it is easier to communicate and spread information. At the same time the numbers of untraditional employments like temporary employments and workers from staffing agencies are increasing. Many organizations have higher employee turnover now than before. This allows more people to have access to confidential information, whose spreading might cause great damage for the employer.