Within process or manufacturing industries, the production of goods and services or the products themselves may have negative side effects such as pollution. An important task for environmental policy is to control and limit these pollutions, for example via regulatory measures. Although, the efficiency of such measures vary greatly between different industries and an increasingly important task for environmental policy is then to encourage companies to engage in environmentally motivated innovation. Governments can utilize other measures than regulation to indirectly decrease pollution. This thesis aims to analyze such activities and how it affects the innovativeness of wastewater treatment, refrigeration and automobile manufacturing industries.

This is a report on the development and implementation of the web shop ?Urballa Ur?, a web application developed by nine students at Linköping university. The report illustrates the methodology and process with intention to answer the question ?How can an online watch store be implemented to increase sales??. During the process the agile method scrum has been used as a working method.

Rapporten beskriver arbetsgången vid utvecklingen av ett kompressorkit till Yamahas snöskotermodell RX-1. Arbetet innefattar konstruktion och dimensionering av tryckkammare och laddluftkylare. Datorverktyg i form av CAD (Computer Aided Design) och FEA (Finite Element Analysis) har använts till att konstruera och dimensionera ingående komponenter. Arbetet har resulterat i kompletta CAD-modeller av ett prototypkit färdigt för CAM- beredning (Computer Aided Manufacturing) och tillverkning..

The work thesis was performed at Assalub a company which is situated in Åtvidaberg. The company works with developing, manufacturing and marketing equipment for handling of lubricants for light and heavier industry. The work thesis it is based on a inquiry Assalub got from MacGregor which is a company within cargo solution, from port to offshore system.For unloading grain and other material from the ship cargo it is used combined inlet feeder and screw conveyor, there the inlet feeder is drilling down through the cargo and feed the screw conveyer with material to further destination. At the bottom of the screw conveyer and the inlet feeder there is a bearing that keep the parts together. However the lubrication of the bearing must be made manually.

Quality can be defined as the ability of a business to satisfy their customers? needs and expectations. Total Quality Management is defined as the way to prevent, appraise and improve the entire organization to increase the product quality. In order to systematically increase quality in an organization, there are different quality systems in use. One example is process management, which is to divide the activities of processes.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

I ett historiskt perspektiv har leverantörerna försökt närma sig marknaden genom att en tätare relation med slutkunden upprättas. Eftersom dagens företag är hårt konkurrentutsatta krävs en effektiv försörjningskedja med leveranser i rätt tid och rätt kvantitet. Det krävs även att företagen har en effektiv lager- och produktionsstyrning för att tillgodose marknadens varierande efterfrågan. Plannja har under de två senaste decennierna försökt etablera sig på nya marknader genom att köpa upp befintliga bolag. Utökningen har inneburit att företaget har kommit närmare slutkunden och att försörjningskedjan blivit längre.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

This paper is about the use of task boards in agile system development projects. The main focus is on how digitalized versions of the task board can be of assistance during the development process. Our investigation is based on qualitative studies, with system developers of various backgrounds and professional roles, along with studies of relevant literature. The main results are that a digitized version of the task board can increase awareness for the team and be of major importance if it is accessible through the web. On the other hand negative effects of the digitalization can emerge as well.

Additiv tillverkning (AT) eller 3D-utskrivning är en teknologi som har berömts den senaste tiden och förutsägs kommer att förändra hela tillverkningsindustrin. Dessa termer hänvisar båda till ett antal tillverkningstekniker där ett objekt framställs skikt för skikt genom att successivt tillföra material i tunna lager.Baserat på en litteraturstudie och intervjuer med experter inom området undersöker denna studie möjligheten att använda AT inom företaget CJ Automotive (CJA) vilket är en underleverantör inom fordonsindustrin som tillverkar olika slags pedalsystem. Rapporten beskriver additiv tillverkning, dess fördelar och olika användningsområden. Olika AT-tekniker, AT-material och välkända 3D-skrivartillverkare presenteras. Signifikanta fakta rörande både kvalitet, kostnad och teknik redogörs för.

The Division of Language and Communication at Chalmers uses a web-based language tool, named EngOnline, to teach English grammar. The language tool suffers from some shortcomings. These include stability problems and an outdated interface but, above all, there is no documentation. Because of the lack of documentation and EngOnline?s need of maintenance, the Division of Language and Communication has decided to replace the language tool with a new and well documented one.The new language tool was developed using an agile work process; detailed documentation was replaced with more efficient communication.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

This paper is about the importance of engagement, cohesion and clarity in offshore outsourcing projects. The focus is on how the communication is handled between co-workers in different countries. My research is based on qualitative studies of literature on the subject, along with interviews with leaders in various companies in Sweden that utilize offshoring to countries in Asia. This study shows that the companies interviewed who utilize offshoring are all taking care to create engagement, cohesion and clarity in their offshore offices. It also shows that companies can succeed with their offshore strategy without using agile development methods, contrary to what literature on the subject recommends.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.