The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

The purpose of this essay is to examine if the municipality has a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project.In Karlstad there is now (2006) a large building project in form of a shopping mall. This project is in its final stage of completion and offers me a suitable case to examine. To undertake the purpose of the essay, the following research question is formulated:Do the municipality have a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project as the Mitt I City project?In an attempt to examine the project and the planning process, three themes are applied. The first theme derives from the hypothesis that the part that initiate the process gets the upper hand as future discussions are taking place in relation to the original ideas.

Events are a growing channel for companies and organizations to reach out to their customers. The com-munication channel opens up to satisfy all human senses. Which are required for a message to go into the receiver and be memorized. The research gap we decided to contribute to we made a case study of an event that is not sport related and looking at both the transmitter perspective and receiver perspective. Thus, the purpose of our study is to increase the understanding of how the transmitter should be able to convey the purpose and goal of the event to the receiver.

This essay is written about how the physical environment affects teachers? own learning. The purpose is to see how the teachers? work is affected by various factors, such as the uses and placement of the teachers? offices, common room, or any other places where a meeting may occur. The survey was conducted using both interviews and observations of the teacher?s office.

Everyone has to take a greater responsibility in energy issues, both individuals and companies. There have been some major developments in the construction industry but there is still a lot to be done. This diploma work thesis presents different methods of making existing construction shed establishments to use less energy. What is possible to do and how much energy is there to be saved? A shed establishment consisting of 8 shed units were studied in this project and the building simulation tool VIP-Energy was used to simulate different types of material in the sheds. An infrared camera was used to locate thermal bridges. There are several factors that can be improved to make a construction shed establishment to use less energy.

The aim of this bachelor's thesis is to investigate how teachers view the way they build their relationships towards students, both in general and, more specifically, towards those students with some type of attention deficits. The focus of this thesis has been on how great an importance teachers place on this relationship. Especially when it comes to working with students with attention deficits. We also want to know to which extent this relational perspective is rooted in teachers' practice. The theoretical basis of this study is the relational perspective formulated by Aspelin and Persson (2011).

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

Background: Power by force and threats used to be the common way to collect taxes, but this procedure is today completely different. It?s now more about building a mutual relationship and with help of laws and controls steer citizens and companies to pay the tax they owe. Thus the way to collect taxes have changed over the years, the collecting of taxes aren?t a popular task to do.

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The Swedish market for vehicle inspection is re-regulated since June 2010. More than four years after the re-regulation there are eight companies in the market. Two of these companies are a result of the former monopolist's owners divided the business among themselves. The remaining six companies have entered the market through acquisitions or by building up their business from scratch, these are known as new entrants in the study. The competition has developed slowly and the former monopolist still has the highest market share.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

A new site- and construction-law came into effect in May 2011. The new law, PBL2010:900 implies several different changes of the law. These changes concern bothconstructors, people working in municipality and county councils and other peoplethat in some way are related to the building sector. Except from the change in orderof the chapters and the renewed and modernized language, the law has now beenextended with a few new phases.According to the new law a certificate has to be issued to start and finish theconstruction; the construction consulting has changed name into technical consultingand the protocol for the controls has to show what the control is being compared to.This diploma work concerns control visits on construction sites as related to the newlaw. The reason why visits on construction sites are now implemented in the law isbecause the government saw a lack of trustworthiness in the old law.

Den bostadspolitik som förts de senaste två decennierna har gett oss en alltmer segregerad stadskärna i Stockholm. Byggsubventionernas avveckling på 90-talet har lett till en historiskt låg byggtakt och ett byggande som ensidigt riktat sig till resursstarka grupper i samhället.Parallellt med detta har stora delar av hyresbeståndet ombildats till bostadsrätter vilket medfört att många relativt billiga hyreslägenheter i äldre fastigheter har försvunnit ur beståndet. Dessa är svåra att ersätta med nyproduktion, då dessa är dyrare.Kärnproblemet är förstås att det är dyrt att bygga hus och om man antar att den nuvarande bostadspolitiken består är det ytterst angeläget att utveckla kostnadseffektiva byggmetoder för att möjliggöra lägenheter med överkomliga hyror som kan bidra till att motverka boendesegregationen på sikt.Vårt förslag består av ett bostadshus i Stadshagen. Fastigheten är indelad i två byggnadskroppar som länkas samman via ett system av loftgångar kopplade till ett trapphus. Husen är uppbyggda av volymelement som staplats på en platsgjuten sockel.

High housing- and construction costs is a fact in Sweden today. Prices on building materials more rapidly than producer price index for industrial goods. Prices tend to rise during market boom but does not adapt during diminishing demand. The effects of fading demand can rather be deduced through discounts and quotations. During 1992-1998 when the Swedish construction sector found it self in severe crisis the prices of construction materials kept rising more rapidly than PPI for industrial merchandise.