This paper investigates and explains the existence of different governance structures in the Swedish film industry. Using a theoretical framework of transaction cost economics, it is shown that trust follows from frequent production projects, affecting the distributors? control of producers, cinemas, video retailers and television. Control becomes more flexible, informal and less time consuming. Furthermore, the control of the distributors? relationship with television and cinemas proves to be multidimensional and affected by transaction activities, as well as by demands from previous parties in the value chain.

???This study has been made with the purpose of gaining an understanding of how a Swedish company may think and act concerning their internal control. An American body, COSO, have for some time published documents containing guidelines for how companies should go about this process, however, when conducting this study we were not aware of the extent to which companies in Europe and mainly Sweden used them. In order to learn about this, and also to gain an understanding of when these guidelines are appropriate, we conducted a case study with a large-sized, multinational Swedish company. We also conducted an interview with an expert in internal control monitoring, Anna-Clara af Ekenstam of Pricewaterhouse Coopers, in order to get the perspective of the evaluators in this process and to gain some insight as to whether our case is typical in Sweden or not. We found that our company disregards certain aspects of internal control condoned by COSO, while performing better on other dimensions.

Franchise theorists have to a large extent failed to keep up with the actual development in global franchise chains. The recent emergence of fast growing multi-unit-franchisees has fundamentally been ignored, and it has been claimed that the new phenomenon can be regarded as a mere replication of the franchisors? structure and control system into sub hierarchies. This study however, suggests that the reality is more complex. Through conducting case studies of two Nordic multi-unit-franchisees, new theories are built explaining how and why control systems are designed the way they are.

BackgroundThere are different organizational structures and control and it has been proved difficult to find a combination between these that leads to goal congruence and improved efficiency. An organization can be structured according to hierarchical levels and the decision making can be either centralized or decentralized. Organizational control can be classified according to the amount of rules and balanced scorecard can be used to weld together the structure with the control.PurposeThe purpose is to create an understanding of how two types of structures and control in an organization appears and also to investigate how these differ from one another concerning the balanced scorecard as a control system. We will also investigate how the variables goal congruence and efficiency are affected by the implementation of the balanced scorecard.MethodTo answer the purpose of this thesis we have mainly used the qualitative method since we have studied two organizations thoroughly through interviews on different levels of the organization. The study also has some quantitative elements since we wanted to get a more truthful picture of the organizations.

An inflammatory reaction is induced after release of proinflammatory mediators such asinterleukin 1 and 6 and tumour necrosis factor ?. These mediators stimulate the liver tosuppress the syntheses of albumin and endure the syntheses of acute phase protein forinstance C-reactive protein. The aim of this paper was to perform a method validation on animmune turbidimetric assay to quantify C-reactive protein in canine serum at the laboratory atSkara Animals Hospital, Skara, Sweden. The validation involved evaluation of the assaylinearity, precision, stability and recovery.The method was proved to be linear for both TruLab control and Medinor control.

Uppsatsens syfte är att belysa hur vision, målstyrning och feedback upplevs av omsorgspersonal då de dagligen inte har tillgång till en fysiskt närvarande chef. För att uppnå vårt syfte har vi valt att genomföra en kvalitativ studie,i en mellanstor kommun som aktivt arbetar med vision och målstyrning sedan ett antal år tillbaka. Det empiriska materialet utgörs av fyra stycken intervjuer med omsorgspersonal utifrån semistrukturerade frågor. Våra frågeställningar är följande: Hur upplever omsorgspersonalen på självstyrande enheter implementering och förankring av organisationens vision i sitt dagliga arbete?  Hur upplever omsorgspersonalen på självstyrande enheter att målstyrning fungerar? Hur upplever omsorgspersonalen på självstyrande enheter möjligheten till feedback med en fysiskt frånvarande chef?   Vad anser omsorgspersonalen på självstyrande enheter om chefens närvaro/frånvaro? För att tolka och analysera vår empiri, har ett hermeneutiskt förhållningssätt och en abduktiv ansats använts.

This report describes the design and construction of a prototype that automatically aims a microwave link towards a target. The link, that is located on a mobile aerial mast, is used by Saab Training Systems as a part of an infrastructure network. The report also discusses the development of a GUI that communicates with the control unit by Bluetooth.The control unit, called Pan/Tilt-controller, controls the position of the link by stepping motors. One motor controls the azimuth angle and the other one controls the elevation angle.By a GUI the operator enters the coordinates on its own position and the targets position. Hereafter a bearing is calculated and it will be sent up to the control unit.The control unit will sense its own direction by a magnetic sensor that works as an electronic compass.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

Today, many discussions are taking place through different platforms concerning the huge problem of ill health within modern society. Ill health tends to affect both children and adults. For the adult sector ill health may lead to doctor?s notification of illness in the short term and on the long term permanent disability benefit. In the mass media there are often articles published that point out the rising number of people with sick pay and people being given permanent disability benefit.

Syftet med denna studie var att undersöka handbollstränares kunskap och förståelse för feedback utifrån ett aktörsperspektiv. Urvalet baserades på lokala handbollsklubbar där kravet var att de skulle träna flickor i 16 ? årsåldern. Det skickades ut brev till 16 olika klubbar där en förfrågan gjordes om ett deltagande. Tre stycken handbollstränare som uppmätte urvalet valde att delta i studien och dessa har behandlats med anonymitet under hela processen.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

Individens tro på den egna förmågan benämns self-efficacy och är en viktig del vid avgörandet av hur en uppgift ska lösas, samt av hur resultatet blir. När individer presterar spelar feedback en central roll för om det kommer att skapas motivation att uppnå målen eller inte. Ovan nämnda begrepp är även centrala för den kollektiva self-efficacy som är gruppens tro på sin förmåga. Studiens syfte var att undersöka hur en individs self-efficacy påverkas vid ett negativt utfall inom ett prestationsområde. En enkätundersökning med 81 lagidrottsspelare genomfördes i Västmanlands län.

Studiens syfte var att undersöka om det fanns skillnader i personlighet och val av konfliktstil beroende av vilken placering respondenterna hade i syskonskaran samt om Locus of control skiljde sig mellan olika åldersgrupper. Samband mellan chefers konfliktstil och personlighet undersöktes också. De 103 respondenterna som var mellan 25-75 år, 63% män och 37% kvinnor, besvarade en enkät som bestod av demografiska frågoroch arbetsrelaterade frågor om chefskap. Tre test användes; ett personlighetstest, RottersLocus of Control och Thomas-Kihlman?s konfliktstiltest.

AbstractThe purpose with this study was to get knowledge if there are any possible differences in, and correlation between, experienced stress, experienced demands, experienced control and experienced social support in correlation to shiftwork.The study was made at two central hospitals in south of Sweden and had 90 participants (78 women and 12 men) that answered a questionnaire in the current variables. The result in experienced stress showed that there were no differences between shift workers. The results showed a difference between the day- and the nightshift in the correlation between control and stress. The writers speculates that the reason why the nightshift experience high stressvalues with high control can depend on the lack of presence by higher managers, compared with the dayshift. .

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.