In connection with the admittance of the EC-directive (99/31/EC) in Swedish politic, through the constitution of waste depositing (2001:512) at year 2001, the rules about management the landfills and leachates tightened. At the landfill Vissberga in the municipality of Hallsberg, a leachate treatment plant was constructed just a year thereafter. This treatment plant consisted of an aerated pond with a following land treatment and a willow cultivation to replace the land treatment during the summer. In this case the parameters, which were estimated as the most important to reduce, were iron and nitrogen. The iron would react with the oxygen-rich water in the aerated pond and precipitate to ferric-hydroxide and than settle in a calm zone of the pond.

The aim of this literature study was to give a clear picture of what gastric dilatation-volvulus is, and how the acute- and postoperative treatment and care is managed. The general aim is to support and help the veterinary technicians in their clinical work. Gastric dilatation volvulus is always an emergency. The primarily goal when these dogs are hospitalized is to establish an adequate cardiovascular function. This is done by immediate intravenous fluid therapy followed by decompression of the dilated stomach.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

This report deals with life-history variation for Eurasian perch (Perca fluviatilis L.), with special emphasis on age and size at maturity in females, in perch populations that have changed in size distribution. The collection of fish samples was made with multimesh gill nets year 2011. The perch?s length, height, weight, status of gonads has been analyzed, and by observing the opercular bone the age has been determined. In two lakes close to Umeå in northern Sweden, Fisksjön and Ängersjön, the live-history traits of perch have been studied.

Objective: In recent years there has been an increasing interest within the clinical (medical) science in measuring people?s health. When estimating quality of life, present practise is to use the EQ-5D questionnaire and an index which weighs the different questions. The question is what happens if the individuals estimate there own health, would it differ from the public preferences? The aim is to make a new prediction model based on the opinion of patients and compare it to the present model based on public preferences.Method: A sample of 362 patients with unstable coronary artery disease from the Frisc II trial, valued their quality of life in the acute phase and after 3, 6 and 12 months.

In a global economy it is important to understand what project management is and how it functions in a contemporary company. This report includes an empirical case study of a project flow, which was conducted in the department Packaging Concept (PC) which is a part of Stora Enso. As all of PC´s customer enquiries are unique and must be considered an individual project, PC continuously works in projects. An analysis of the project flow was conducted based on interviews at and visits to PC as well as relevant documents distributed by the department. The report gives an understanding and analysis of how PC works in projects.

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

During spring 2009 a three meter tall and laughing robot was developed in collaboration between Royal Institute of Technology and Royal University College of Fine Arts. The robots function and esthetics is based on an existing toy robot called Elmo. Elmo is 30 cm tall but now the goal was to make it 1000 times bigger in order to present it on the spring exhibition of Royal University College of Fine Arts. Due to only four months of developing and building time a demand of fast determination and good planning was required. In order to make a good structure for the project it is divided into five phases: Analysis of Elmo, planning, concept development, detail construction and finally product development and testing.In the first phase valuable knowledge is obtained according to the movements and geometry of Elmo.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

This essay is an attempt in analysing the establishment of the first Early Middle Ages castles in Scania. There are two types of castles in Scania during the eleventh century, keeps andringworks. This castle was built by three fixed elements of power: the crown, the church and the aristocracy. The result of the survey shows that A majority of the castles during theeleventh century in Scania where initiated by the church.The results also show two building phases of castles under the period. The first building phase begins in middle of the eleventh century and the second building phase begins in theperiod 1180- 1200.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

Risk assessment of effects on the environment and health outcome caused by the iron industryLina LöfqvistIn Sweden you can find lots of contaminated areas, which can create problems for both humans and nature. To reduce the long-term contamination grades, Naturvårdsverket have created a report with regard to the contaminated sites. This builds on the ?Method for Inventories of Contaminated Sites? which is abbreviated MIFO. The aim of MIFO is to achieve better environmental planning in Sweden.

The so called ?ByggaF-method? is a relatively new Swedish method to stop moisture from being built into a building. The method should prevent damages on buildings as a result of mould growth and moisture. The purpose of the method is to include moisture control in the entire constructionprocess, from the projecting phase and all the way to the management phase. Up until now, there is no proof if the method is profitable or not and no studies have been made on the topic.

The maintenance phase within software projects is typically very expensive in terms of resources. The activities of this phase are largely focused around some form of modification of program code. This leads one to consider if there are alternative methods of code production that results in code that allows for less costly modifications. This thesis has its basis in a subset of those concepts which research has shown to provide more flexible code. Once this subset is established, connections are made between the concepts within the subset and claims of benefits provided by the use of Test Driven Development (TDD) methodology.