Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

This study is about which opinion active teachers are having when it comes to integrate religious traditions and ceremonies in their teaching. The aim is to study the religious traditional ceremonies part and how they are being defined in the Swedish classrooms in primary school. Together with literature, research and the discussion in this study, I came up to a few conclusions of how religious ceremonies will be integrated and how it looks like in Swedish classrooms. In this study of literature and research overview, the literatures are intended to provide an insight about how the Swedish school system went from a Christian education to a school that was separate from the church. In the chapter called Literature and research overview the literatures are written by scientists and therefore this chapter is based on research.

The Swedish e-commerce has been established for about 25 years, with strong growth from the millennium onwards. The companies that are active within it has many different backgrounds. Mail order companies were some of the early adaptors but today it is also common for companies to first create the e-commerce part of the business, before opening a store. A long list of companies has over the years come and gone, the rotation of the e-shops that are popular have constantly changed. We asked ourselves why.We wanted to get an understanding of the Swedish e-commerce, both from a business perspective and from a customer perspective.

Vilka funktionskrav ställs på MPS-system för plastindustrin? Vad är det för faktorer som medför att existerande standardiserade MPS-system inte kan användas inom processindustrin? Det är dessa frågeställningar ligger till grund för denna rapport.Rapporten inleds med en genomgång av hur kravspecifikationer bör utformas, vad material- och produktionsstyrning innebär samt en introduktion till process- och plastindustrin. I de fallstudier som presenteras diskuteras processen från order till leverans med avseende på material- och produktionsstyrning.De funktionskrav, som identifieras som viktigast för ett MPS-system för plast-industrin, kan innefattas i följande punkter:· Prognoshantering som kan omvandla försäljningsprognos till leveransplan.· Verktygshantering som klarar en koppling mellan produkt och verktyg.· Materialbehovsberäkning som kan hantera ingöt kontra produkt.· Spårning vid felsökning..

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

On-site sewage systems are common on the countryside of Sweden with approximately one million on-site systems installed. Due to insufficient function, these contribute significantly to the total discharge of phosphorus to rivers and lakes, causing eutrophication. In order to reduce eutrophication and to fulfil one of the environmental quality objectives, the decision was taken by the Swedish Government in 2005 that 60 % of phosphorous in sewage sludge is to be recycled to arable land before 2015. To make recycling a reality, new solutions have to be found. Federation of Swedish Farmers (LRF) takes an active interest in this issue and has initiated this study. One problem is that the food industry is sceptical towards recirculation due to the risks that products from sewage systems may contain pathogens, heavy metals and unwanted chemical compounds, e.g.

Högskolan i Gävle har inget gemensamt system för tjänsteplanering. Processen är ineffektivt och innefattar ifyllandet av Excel-ark. Detta arbete omfattar designen och skapandet av ett tjänsteplaneringssystem åt en tjänsteplanerare vid HiG. Det som efterfrågades var ett system som är smidigare och ger möjlighet att överblicka det som planerats. Systemet behövde bara stödja en användare.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

The aim of this report has been to investigate the use of electricity energy before and after a conversion of foodservice. The ambition was also to highlight the food safety and the retention of nutrients in relation to the conversion. The methods being used were qualitative interviews, case studies, study visits and literature. The equipment and the use of energy was the same in 2008 as in 2011 for hot-holding of the tested component, sauce with ham. The chilled system used more than three times the energy and cost for one portion than one portion in the hot-hold system.

The purpose with our thesis is to understand and explain the advantages and disadvantages there is with the self scanning system. The advantages and disadvantages we will highlight from three different angels; the store management perspective, the staff perspective and the customer perspective. These three perspectives will together form an overall perspective over the advantages and disadvantages as the self scanning system has contributed with. Finally we will highlight the differences and resemblances we have found between the perspectives.Through a qualitative approach we have gathered data to our thesis. Furthermore we have based our theory chapter and our empirical chapter on the base of Grounded Theory.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

Denna uppsats redovisar huruvida användarmedverkan kan ses som en kritisk framgångsfaktor i införandet av ett ERP-system. ERP-system kan sägas vara en vidareutveckling av Informationssystem (IS) och i tidigare avhandlingar och uppsatser har det framgått att användarmedverkan är en kritisk framgångsfaktor vid införandet av olika IS. I samband med detta kunde därför följande hypotes formuleras:Borde inte användarmedverkan vara viktigt även i införandeprocesser av ERP-system?Med hjälp av denna hypotes så har uppsatsens frågeställning specificerats enligt följande:Kan användarmedverkan ses som en kritisk framgångsfaktor i samband med ERP-system?Vad innebär i sådana fall användarmedverkan i samband med införandet av ett ERP-system?Hur och med vilka hjälpmedel kan man involvera användare vid införandet av ERP-system?Syftet i denna uppsats är att skapa en uppfattning om, och i sådana fall varför, användarmedverkan kan ses som en kritisk framgångfaktor i samband med införanden av ERP-system. Samtidigt kommer undersökningen att kartlägga hur, dvs.

Most of the saw and pulp industries have stored wood nearby their production, the main reason is to have a continuous wood flow to the production. Wet storage of wood is of great importance to keep the wood quality. Without water sprinkling the risk of drying outand decomposition through biological activity increases significantly and will result in a negative effect on future production and quality. One drawback of wet storage of wood is the leaching of chemical substances into the surrounding recipient. The log yard run-off contains phosphorus, nitrogen, phenols and organic substances. These substances can cause problems for the surrounding environment. The main objective of this project is to gain an understanding of the wet storage used by the Swedish wood industry and estimate the environmental consequences that run-off water will have on the recipient.

The aim of this study was to compare activity, lying down and getting up behaviour, weight gain and cleanliness in heifers in cubicles versus on deep-litter. The study was conducted from autumn of 2005 until autumn of 2006 in a commercial organic dairy herd with 340 cows. In 2005 the farm rebuilt half of the young stock accommodation from deep-litter pens to cubicles. The experiment used 150 heifers of the breeds Swedish Red, Swedish Holstein and crossbreeds between these, all born on the farm. The animals were divided into three blocks based on breed and within each block they were sorted after increasing age. The youngest heifer in each block was randomly allocated to one of two groups, cubicle or deep-litter pen.