GNT Group is a Nordic/Baltic wholesaler that distributes products in the IT, entertainment and home electronics sector. GNT is facing problems with inaccurate inventory levels which can lead to unnecessarily high inventory carrying costs or lost sales. Currently the decisions about when and how many to order are made somewhat arbitrarily by the responsible personnel. Their decisions are based only on some brief sales history and on experience. GNT wants to develop its ERP system to be able to support the purchaser in these and other related decisions.

Värmekollektor in Sunne is a company whose main occupation is to collect the gas produced inlandfills. The gas contains about 50 % of Methane which is a greenhouse gas 20 times worse than CO2and should therefore not be allowed to leak into the atmosphere. The Methane is in as large amount aspossible used in different plants for example heating of households. But there are occasions when aflare is needed to burn the excess gas at standstills or testing of new landfills. The Flare only burns themethane to reduce the hazarder?s effect of the environment, it does not take advantage of the energy inthe gasThe goal of this master thesis was for me to create a foundation for an in-house production offlares for Värmekollektor.

The aim of this master thesis is to investigate the development on the Swedish book market for the beginning of the 21st century. During the 21st century a lot of things have happened on the Swedish market for library books. Twenty years ago in reality only one company existed that could deliver books with the demanded equipment to the libraries, but in year 2010 there are four companies offering the same service. Other news during this time is bookshops on internet. We found this development interesting and therefore decided to contact the four companies as well as six libraries to find out what they thought of the new situation.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

People in refuge face states with a dilemma. This dilemma consists of a wish (or obligation) to help those who need a refuge, and at the same time consider domestic issues such as financial costs and security problems. Thus, there are two perspectives which are important to consider when refugee policies are made. The aim of this paper is to see which perspective the EU had when making their migration policies. The question asked is: which perspective is behind the making of European refugee policy?The theories realism and idealism are used to describe the conflicts in the making of European refugee policies.

This thesis has been carried out onbehalf of Lindborg & Sons in Örsundsbroand is a concluding part of the Bachelorof Science program in ConstructionEngineering at Uppsala University. Theaim of the project is to make a plea fora database of good examples of themachine room types using Revit drawingprogram, and work out a correspondingworksheet .At the start of the process it becameapparent that there were somedifficulties in using Revit to creatingmachine room types of the variety whichthe company builds. For modelling ofoblique, curved and irregular lines, Ihad to use my AutoCAD Architecture andthen import them into Revit.The creation of calculus in Excel wastime consuming. On the other hand, it isa one-time work to create the template.The advantage of Excel is that there isno need for a re-calculation at the costof various types of machine hall. Allthat is needed is to replace the variousparameters.

This report is the final step in the Bachelor of Science program in Building Construction Engineering, Department of Engineering Sciences, Uppsala University.The purpose of this study is to highlight the difficulties and possibilities that could involve the introduction of new energy efficient technologies and changing work around this technology. This study focuses on energy use at a construction site or other temporary workplace where so-called portacabins are in place to address the need for temporary facilities.The method for obtaining knowledge on the subject was mainly interviews with site managers working in Svevia AB's various activities. In conjunction with the interviews I visited construction sites and portacabins if it was possible.My most important suggestion to Svevia AB concerns a better organization in order to make poratacabins more efficient on energy and costs. The company should also evaluate and monitor the energy efficient portacabins that are in operation.Expected energy savings of new technology may not materialize if there are gaps in information, education, technical services and technical maintenance. It is very important to utilize the experiences of new technology.

The implementation of large IT-systems is a complex area where many aspects have to be taken into account.KSU, Kärnkraftssäkerhet och Utbildning AB, is a small company in the Vattenfall group that is increasingly being urged to implement SAP, one of the largest ERP-systems on the market. Vattenfalls purpose with SAP is to centralize certain processes within economy that are common to all the companies in the group, this to gain benefits with economics of scale. However, KSU is not convinced that SAP is a suitable system and that the common processes apply to them.The purpose of this degree project is to investigate if SAP is a suitable system and if KSU will benefit from a transition to SAP. Three perspectives were applied to further specify important areas of the main question. From a technical point of view KSU:s demands on a system was mapped against SAP.

The goal of this master thesis project was to develop computer models of some plausiblepretreatment techniques and to assess the potential benefits/costs of using pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofpretreatment techniques. The additions consist of: One model of pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.

Six different Digital Proofing Systems from three different techniques have been evaluated as totechnique, printing quality, economy and usability. Digital proof from two paper qualities, coatedand uncoated, has been compared with references printed in offset, to see how good they match eachother. Only two Proofing Systems manage to print on reference paper. The other Proofing Systemsuse special paper for digital proof.Measurements and visuell judgement show that the Digital Proofing Systems visualise referencepictures with quite good quality. Proof optimised for coated paper visualise the colours with goodresult.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

The basis for this study was my own conception of a weakening of recreational activities in the Swedish secondary school. The aim of the study was to look into five school leaders? ideas of recreational activities. The school leaders? who participated came from various municipalities in two different counties, southern Värmland and northern Västra Götaland (former Skaraborg).

The municipality of Enköping is presently working out a new layout plan for the town of Enköping and new residences are planned in the harbour area. Because of these plans, the municipal energy company ENA Energi may have to move its location from the harbour to another part of the city.The aim of this degree project is to investigate the possibility of building a new CHP plant in another area of Enköping. The future demand on district heating and infrastructure at the new location have been projected. A new CHP plant has been dimensioned and economic analyses concerning the project have been made.Results show that the future demand of district heating in Enköping will differ a little from the present needs. In 2030, the district heating production is expected to be c.