Since 1996 the Swedish households have ten folded their volume of loans for own homes that is attached to a floating interest rate. Also in 1996 the Swedish electric market was deregulated. These two facts have increased the volatility in the household expenses for these two commodities. This thesis studies the risk for homeowners attached to the exposure against the electric and the credit market. The risk model used is Cost-at-Risk which is usually used by public authorities for analysing the risk involved with national debt.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

Collective collapse occurs when a majority of players in a team suddenly perform below expected level in a match of great, often decisive, importance in spite of a normal or good start of the match or when a team underperforms right from the start of the match. The aim of this study is to investigate collective collapse, focusing on emotional contagion. The study is a qualitative study based on semistructured interviews with nine handball players in an elite team. The results show six factors presented as themes. These are Preparations, The coach and leadership, Emotional contagion, Communication, Role Acceptance and Incongurence.

Background: Today businesses are largely structured in projects and temporary organizations. In many companies, the ability to pursue projects is decisive for the business efficiency and competitiveness. The risk literature do not discuss identification and handling ofproject risk in building- and construction companies to a large extent, which has led us to investigate how project risk can be treated and handled in Swedish building- and construction companies. Purpose: The purpose of this thesis is to cover and describe business risk in Swedish building- and construction projects with focus on different risks and risk tools, and also to modify a model for evaluating the business risk maturity. Realization: This thesis has both traces of a case study and a cross-section study and examines eight different companies that are active in the building- and construction business.

This study examines the background and nature of the credit default index swaption (CDIS) and presentsrelevant methods for modelling credit risk. A CDIS is a credit derivative contract that gives the buyerright to enter into a credit default index swap (CDS index) contract at a given point in time. ACDS index, in turn, is a multi-name credit default swap (CDS). Within the eld of research, thisthesis identi es the CDIS pricing models presented by Jackson (2005), Rutkowski & Armstrong (2009)and Morini & Brigo (2011) as the most recognized and developed. These models are evaluated byreconstruction in a numerical software environment.

Detta arbete undersöker ACT och ställer frågan om terapiformen kan betraktas som en existentiell beteendeterapi. Ett material bestående av 53 vetenskapliga artiklar undersöktes med en tematisk innehållsanalys för att få en bred och aktuell bild av ACT i avseende på teori, praxis och människosyn. Resultatet sattes in i en psykologihistorisk kontext i allmänhet och en beteendepsykologiskt kontext i synnerhet. Det som talar emot ACT som en existentiell beteendeterapi är främst bristen på oppositionella inslag och kritik av den vetenskapliga normen. I andra vågskålen placerar resultatet det holistiska perspektivet samt synen på människan som ickedeterminerad.

The aim of the study is to examine how different factors,such as views on how knowledge is produced and howlearning takes place, effect the way an academic librarymanages space. This is done by looking into how a specificlibrary, namely Library & Learning Resources (LLR) at theUniversity of Borås, by re-planning the building?s structure,design and functions, can support the students? differentstudying habits. The analysis is performed by using a theoreticalperspective built by a model first created by thearchitect Daniel Koch. The model is designed to look uponhow space produces meaning and knowledge.

Intelligent IT-based solutions, often called Smart Grids, are considered to be the future balancers of renewable energy sources. One area within the Smart Grid concept is called demand response, which is focused on making customers more consumption flexible by making them more active in their consumption. In this thesis the aim is to analyze a business model by investigating the income potential for a demand response solution as well as its market potential. This has been done through literature studies, interviews and development of a computational model.The use of 5000 households with flexible consumption can provide a cost reduction of 17.2% or 2.4 million SEK for a balance responsible party during an average year. If the solution is used to make strategic bids on the regulation markets the study indicates that the largest potential for revenues lies within this strategy.

In the present thesis, we have studied the management control system in Enskede-Årsta-Vantör, one of Stockholm?s municipal districts, with focus on theories about New Public Management (NPM). When NPM was introduced, a number of complications arose. Some of these, along with the district?s solutions of the complications, are described and analyzed using e.g.

The purpose of this thesis work was to develop an automatic fault detection system for surveillance of bearing temperature in hydropower turbines. The parameters used except the bearing temperature were cooling water temperature and cooling water flow. A simple static model based on data sampled every minute was developed to estimate the bearing temperature. Then a detector for detection of change in bearing temperature based on the CUSUM-algorithm was designed. Since the amount of data was very small the developed model was too uncertain to be used in a working system.The designed fault detection system showed to work well for the available data.

This thesis aims to explore how medical social workers/counselors perform their workwith people during crisis and how they accumulate and practice scientific crisisknowledge. This study is an empirical research paper based on qualitative interviewsconducted with eight medical social workers. The data was analysed with Kvalesmodel for categorization, which constitutes the basis of the research. The results ofthe research was then analysed with the use of Cullbergs crisis theory and a model ofevidence based practice which is described by Topor and Denhov. The results showthat the medical social workers practice the evidence based practice model, describedby Topor and Denhov, in combination with Cullbergs crisis theory.

The aim of this master?s thesis is to examine the roles ofthree different public libraries in three differentcommunities. In order to get some answers about the roles ofthe public libraries I have used the following questions: Howis the local cultural policy formulated? How is the locallibrary structured? What or which profiles has the publiclibraries in the three communities?I have made three qualitative case-studies in three differentcommunities. These three communities are somewhatlocated in the same area in order to identify any cooperationbetween them.

This master thesis was made to validate hydropower models of a turbine governor,Kaplan turbine and a Francis turbine in the power system simulator ARISTO atSvenska Kraftnät. The validation was made in three steps. The first step was to makesure the models was implement correctly in the simulator. The second was tocompare the simulation results from the Kaplan turbine model to data from a realhydropower plant. The comparison was made to see how the models could generatesimulation result that was similar to the reference power station.

Title: Schibbye och Persson?s Journey: a qualitative analysis of Göteborgs-Posten?s coverage of ?etiopiensvenskarna? from a narrative perspective.Authors: Viktor Eriksson and Max SommersteinSubject: Undergraduate research paper in journalism studies, Dept. of journalism, media and communication (JMG) University of GothenburgTerm: Autumn 2013Supervisor: Mats Ekström, JMG, Gothenburg UniversityPages: 35Purpose: To examine how the narrative-model the hero?s journey is represented within the Swedish newspaper Göteborgs-Posten?s articles on Johan Persson and Martin Schibbye, two Swedish journalists who were imprisoned while conducting journalism in Ethiopia.Method: A combination of Ethnographic content analysis (ECA) and Compositional Interpretation (image-analysis).Procedure: A strategic selection of articles published in the supplement Skenprocessen i Addis Abeba, in Göteborgs-Posten.Results: The narrative model the hero?s journey is clearly represented as cultural frames in Göteborgs-Posten?s articles about Martin Schibbye and Johan Persson. The framing of the events are used to simplify the facts and to make them emotionally accessible.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.