The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

This rapport handles the presence of two kinds of watermills in the Swedish landscape. The first is a small type with a horizontal shovel blade and the other a bigger kind with a vertical standing shovel scoop. The rapport seeks for information of their capacity and how long they existed as flour producing units. A important issue is how small can a brook be and still run a mill. Finally the reasons for their disappearance in one selected parish is shown..

Today?s environmental discussions have led to more progress in the different transportareas. To ride a bicycle is often one of the most efficient alternative when it comes totransport. An Electric bike is, and makes transportation more efficient than a regularbicycle. Electric bicycles do not affect the environment significantly and allows moreconvenient transportation than ordinary bicycles do.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

Smallholder farmers in Uganda suffer from declining productivity. With a rapidly increasing population, marginal land is taken into production and the current land management leads to loss in soil fertility and escalation in soil erosion. There are studies indicating that the use of agroforestry increases soil organic carbon (SOC) compared to systems without trees. Soils which are high in carbon have many advantages, for example better water holding capacity, which can reduce stress on crops during drought. The aim of this study was to determine the effect agroforestry has on SOC concentration in small-holder farming systems in Uganda. The intended system to study was farms practicing agroforestry methods or not in intercropped plantain (cooking banana) fields.

Background: Myocardial infarction is the most common individual disease among people in the west world. In Sweden there are over 50 000 women and men who get myocardial infarction every year and about 40 % of them dies. Exercise training is one part of cardiac rehabilitation and since 1980 Sweden use the guidelines from that time. Aim: The aim was to review exercise-training modalities in cardiac rehabilitation after myocardial infarction and the physiologic- and psychological effects. Method: Facts were obtained by searching through the database PubMed for articles published from 1994 and ten years forward.

AbstractThe tests work is about the subject "synergism of steel and concrete."The construction sector is in a strong competition and the different companies in the PrefabMarket has ever tried to develop new design solutions that are efficient and environmentallyfriendly.The purpose of this report is to highlight different aspects of interaction and size up a columndimension and to examine its efficiency and load capacity as Eurocode 3 and Eurocode 4. A sizing chart that describes the relationship between the torque and normal force shouldalso be made of the interaction . .

This study was made as a part of a feasibility study on a polishing wetland at Rimbo wastewater plant (wwp) in Norrtälje municipality. The wwp had to decrease the nitrogen discharge to reach the limit 15 mg tot-N/l. The nitrogen in the outlet was mainly in the form of nitrate, hence the wetland mainly ought to support denitrification. The proposed area for the wetland was situated right next to the wwp and was already in the municipalitys posession. One aim of this study was to examine what spieces of plants needed to achieve highest possible denitrification.

In this report the importance of irrigation scheduling in dry climate is shown, how it can save water and energy; how this method can improve crop yield by supplying the right amount of water at the right time. It is shown how irrigation scheduling and irri-gation technology together increase the irrigation efficiency..

The Island of Öland has one of the best wind climates for land based wind power in Sweden. An objective for the Island is to become self sufficient using electricity from renewable source of energy such as wind. There is currently 55 MW capacity installed on the Island and it is estimated that grid congestion will occasionally occur if more than 135 MW was installed.The aim of this thesis is to investigate he possibilities for load management by smart charging of electric vehicles, EV. The definition of smart charging is that the charging is done to some extent with an ICT-system, (information and communication technology) that correlates wind electricity generation to the charging of electric vehicles. The purpose is to avoid grid congestions on the sub-sea cable that connects Öland to the mainland because that in turn would curtail wind energy production.

The main purpose of this study was to determine the impact of bedding material on the faecal microflora of horses. Another objective was to investigate the hygienic and physical qualities of the bedding materials used and how these may change in the course of the trial period. The bedding materials used were sphagnum peat and wood shavings. Six horses had each material as bedding for a three week period in a change?over experiment.

Background: In the past 10 years private label has increased significantly in the Swedish grocery market. This is an important strategic event, which is a great challenge to suppliers as it causes stiff competition. To handle this situation an increasing number of suppliers have to make the decision whether to produce private label or not.Purpose: The purpose of this study is to find and analyse factors that influence suppliers in the Swedish grocery market to produce private label. On this basis we intend to confirm or develop existing theories within the field of study.Research method: The study has a qualitative approach where empirical data has been gathered through interviews with suppliers and retailers in the Swedish grocery market.Results: This study has identified factors that underlie suppliers? decision to produce private label.

Denna uppsats undersöker en medlemsorganisations roll och betydelse för utvecklingen av en klustermiljö, samt vilka möjligheter en sådan organisation har att förmedla vikten av sina insatser i och utanför ett nätverk. En kvalitativ metod har använts i form av intervjuer med personer inom den offentliga sektorn vars arbetsuppgifter berör näringslivet i Öresundsregionen. Dessutom ligger diskussioner med nyckelpersoner inom organisationen Medicon Valley Academy till grund för den empiriska studien. De teorier som används är: kluster, trippelhelix, regional innovationsteori, nätverk, organising capacity och Key Performance Indicators (KPI). Fem kommuner från den svenska och danska sidan av Öresund utgör tillsammans med Köpenhamns och Skånes motsvarigheter till landsting den insamlade empirin.

Abstract                ?Due diligence - A resource demanding process?Date:                     June 8th 2012Level:                    Master thesis in business economics, 15 ECTSInstitution:           School of Sustainable development of society and technology, Mälardalen UniversityAuthors:                Erdinc Kirik                                  Pär Matsson                               11th January 1987                      31th May 1985Title:                      Due diligence - A resource demanding processTutor:                     Staffan BoströmKeywords:             Due diligence, the acquisition process, acquisitions, business valuationResearchquestions:              What are the main factors that Bank X, Nordea and Almi is focused on an examination of a due diligence for an acquisition, focusing on private limited companies?Does the approach between the various banks and Almi differ?Purpose:                The purpose of this paper is to create a checklist for private limited companies to use in the context of application for fundingMethod:                 The study was based on a qualitative study, based on primary data in terms of interviews in the subject of due diligence. Secondary data used in the study consisted of relevant literature and scientific articles.Conclusion:            The study showed that the respondents in general focuses on the same areas within Due diligence. The most important point which the respondents agreed on was profitability and repayment capacity. In overall, all elements in a Due diligence process that has an impact on profitability is important to examine.

The capacity to extract information from vehicles has the potential to be very beneficial. Performing analysis on information about fuel usage, emission values and other driving properties of a vehicle can lead to great economic and environmental benefits.This report contains descriptions of two prominent systems for retrieving information of this nature from a vehicle, On-Board Diagnostics and FMS-Standard, and of an implementation of FMS-Standard.The conclusion drawn after this investigation is that these systems do indeed offer access to the benefits mentioned earlier, although to varying degrees and with differing prioritisation..