I detta arbete behandlas transient simulering i ett 1D-simuleringsprogram, i dettafall Gamma technologies GT-Power. Vad som behöver ändras i en modell för attden skall kunna simulera en motor under transienta driftsfall med godnoggrannhet har undersökts. När detta är gjort, skall det undersökas hur väl dentransient kalibrerade modellen kan simulera en motor med förändrad rörgeometripå insugs- eller avgassidan, och vad som måste omkalibreras om detta inte ärfallet.Den viktigaste slutsatsen av detta arbete är vikten av att ha en korrekt framtagenkompressormapp i modellen. Den som fanns tillgänglig under arbetet hade baramätdata ned till 70000 rpm. Detta resulterade i en överskattning av massflödet iden lägre regionen i den av GT-Power framställda kompressormappen.

This thesis considers the development of the software for an, newly developed, embedded real-time control system, based on a Periferal Interface Controller (PIC). The control system is developed to be used for several different applications. In this thesis work, software for two different applications are developed. The first task is a time controlled system, while the other task is implementation of aPI-/PID-controller. A user interface is also developed and implemented.The time controlled system is an automatic horse feeder, which is used for feeding horses at certain predefined points in time.

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

Hawk Turbine AB tillverkar mindre jetmotorer som ofta används i små obemannade och radiostyrda flygplan. I flygplansmodellen Lockheed T-33 Shooting Star är motorn monterad inuti planet varför luften måste ledas ut till atmosfären. För bästa möjliga prestanda måste ejektorn och utblåsröret som leder luften dimensioneras efter motor och flyghastighet.En 3-dimensionell CAD modell av flygplanets installation skapades och därefter simulerats i en virtuell vindtunnel med hjälp av datorprogrammet SolidWorks Flow Simulation. Flera olika utblåsrör i varierande storlekar samt olika former har testats för att avgöra om ändringar kan förbättra prestandan ytterligare.Simulationsresultat visar att det går att förbättra nuvarande konfiguration med 5,99 % om diametern på utblåsröret minskas från 75 mm till 70 mm med en bibehållen form på utblåsröret..

This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..

Rapporten fokuserar på MY500 som är en jetprinter som skjuter lodpasta påkretskort utan att beröra den. Syftet med rapporten är att undersöka möjlighetenatt ersätta den nuvarande skruvpumpen med en spiralpump. Intentionenär att utarbeta en prototyp där spiralpumpen drivs av en positionsåterkoppladlikströmsmotor (DC motor). Prototypen används för att verifierafunktionen hos den tidigare oprövade spiralpumpen och för att fastställa om enstandard DC eller växelströmsmotor (AC motor) kan användas för att ersättaden befintliga stegmotorn.Arbetet börjar med en undersökning av olika motortyper för att sedanskapa en Matlab/Simulink modell med den valda motorn och parametrar förfriktion och tröghetsmoment. Genom simulering används modellen för att undersökaolika reglerstrategier vilka omfattar både hastighets- och positionsreglering.Olika samplingsfrekvenser analyseras för att hitta en lämplig regulator.Prototypen används för att verifiera regulatorns beteende och för att fårealistiska systemparametrar.

The purpose of this project is to get a fully functional, automatic steering system and a variable breaking system with an emergency breaking function to an off road vehicle. This off road vehicle is supposed to work as an aid in military situations. A team of two, Sebastian Attervall and Nichlas Gustafsson, got an order from Jonas Nyårds and the PreeRunners Project to construct a steering system that could manoeuvre an off road vehicle without any human involvement. To make this possible the vehicle would be guided by onboard sensors, cameras and computers. The team where also assigned to construct an automatic breaking system, there also no human would be involved.

The aim of this study has been to examine if an implementation of a One Stop Shop in the public sector and its IT-support can serve as a motor for business development. By examine the relation between the One Stop Shop and the public administrations we have tried to answer this question. The municipality that we have examined underwent a big change, seven years ago, when they implemented a One Stop Shop including a IT-support called Flexite. But despite these seven years and the fact that Flexite has changed approach from a Case Management System to a Support System for Business Development the municipality have not adapted to this change. .

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.