Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

This paper examines how to use different kinds of source material for building surveys. The studyexamines how to use legends, construction archaeological surveys and Ground Penetrating Radar(GPR) as source material, and use them against each other to ensure the reliability they have.As a starting point I used Gräfsnäs castle ruin in Alingsås, Sweden, as an example. Gräfsnäs castlewas probably built in the Middle Ages and was rebuilt through the ages until it became a ruin in thelate 1800s. The castle ruin is today Alingsås most visited attraction.The investigation has focused on three areas which are located in the very ruin; rescue tunnels, thecellar vault and the treasure.There are legends that describe how the castle lord of Gräfsnäs fled an attack of the Danes in 1612 ina rescue tunnel which ended at the beach. At the construction archaeological surveys carried out in1935-36 they found a sewer in the courtyard that was once served as rescue tunnel and ended in themoat.

The aim for this study was to find out what strategies women use to not react against inequality and sexist prejudice. In the study I used a critical realistic approach through, primary, the social ontology presented by Margaret S. Archer. The study focus on both the women?s construction of femininity and their construction of masculinity and what directions it constitutes for the women?s social orientation.

With the growth of information stored over Internet, especially in the biological field, and with discoveries being made daily in this domain, scientists are faced with an overwhelming amount of articles. Reading all published articles is a tedious and time-consuming process. Therefore a way to summarise the information in the articles is needed. A solution is the derivation of an ontology representing the knowledge enclosed in the set of articles and allowing to browse through them. In this thesis we present the tool Ontolo, which allows to build an initial ontology of a domain by inserting a set of articles related to that domain in the system.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Det har blivit allt dyrare att bygga i Sverige, den svenska byggnadsindustrin har halkat efter övrig producerande industri och byggföretagen måste börja tänka i nya banor om de ska klara de nya utmaningarna. Lean-tänkande har länge nyttjats inom den tillverkande industrin och byggföretag har på senare år börjat snegla på dessa koncept i syfte att öka sin produktivitet. Problemet är att byggindustrin inte har homogena produktionsmiljöer och därmed inte kan använda samma lean-koncept som exempelvis bilindustrin. Därför har ett nytt koncept som kallas Lean construction utvecklats som bygger på ett antal principer från traditionella produktionssynsätt (Koskela, 2000). Konceptet är relativt nytt och forskningen inom området har främst fokuserat på lösningar på specifika problem istället för att skapa förståelse för konceptets helhet.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

Bakgrunden till detta examensarbete är byggföretagens utmaningar med att bedriva byggprojekt där nya och unika objekt skall konstrueras, med många nya förutsättningar och allt som oftast även en ny sammansättning av personalstyrkan. Ett gemensamt behov för dessa byggprojekt är att effektivt kunna hantera en mängd av olika och nya variationer.Oden anläggningsentreprenad AB presenterade ett problem gällande oönskade variationer av produktionstider för betongmonoliter som innefattar mycket repetitiva arbetsmoment. Examensarbetets syfte blev att besvara följande frågor:Vilka är faktorerna som påverkar variationer i produktionstiden vid bygget av betongmonoliter?Vilka är lösningarna till att reducera faktorerna som negativt påverkar produktionstiden?Hur ska de nya lösningarna implementeras?I examensarbetet har teorier kring lean production, lean construction, organisationsförändring och betongkonstruktioner undersökts. Det empiriska materialet har hämtats genom att författaren deltagit i produktionen och fört en fältdagbok över dagliga problem som produktionspersonal påtalat.

Uppsatsen innefattar en intern benchmarking för Volvo Construction Equipment, Arvika, Hallsberg, Eskilstuna och Braås. En kartläggning utifrån intervjuer ska göras över de investeringskalkyleringsmetoder som används i dagsläget. Syftet är att arbeta fram en mall för investeringar inom Operations Sweden, där samtliga involverade använder samma beräkningsmetoder och parametrar i sina bedömningar.Volvo Construction Equipment tillverkar anläggningsmaskiner. De fyra fabrikerna bildar tillsammans gemenskapen Operations Sweden. Inom Operations Sweden tas beslut om ett investeringsprojekt ska genomföras eller ej.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.