In the report we have investigated four high-rise buildings with the intentions to find out witch parts are prefabricated and what relation can be found between structural design, Prefabrication and the logistics. After the investigation we noticed that the grad of Prefabrication in each one of the projects is good in relation to what purpose the building have and the given background. During the report we found that layout ? structural design ? Prefabrication ? logistics is an order that we think can make the production of the building more effective if followed. We believe that the Prefabrication of high-rise buildings have potential to grow and get more optimized in the future..

This is an investigation of a mobile Prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile Prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established Prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile Prefabrication factory and can thus avoid long waiting times and cyclicality.

This Bachelor?s thesis consists of two parts; one with Prefabrication (prefab) in focus and thesecond part includes detail design of a house project. These parts are linked together by designingsome parts of the house project as prefabricated.The focus section investigates how Prefabrication can act time-, costs- and environmentallyeffective to a building project. This is investigated by combining literary sources with sourcesbased on reality in the shape of interviews. The result of the investigation is that prefabcould acteffectively on previously mentioned factors,if this way of building is used in a proper way.The detail design of the house started in a residential area with a new local plan in Huddinge,named Sjöängen II.

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

Background: The construction industry is Sweden?s single most important industry branch with a significant influence on Sweden?s wealth. The political restrictions that once controlled the industry are today almost gone. This combined with an unbalanced supply and demand situation on the Swedish constructions market, caused by urbanisation, has led to increased pressure on the Swedish construction companies who now are forced to find new methods in their struggle to contain or increase their competitive advantage. Purpose: The purpose of this thesis is to survey: which strategic variables are of great importance in today?s Swedish construction industry with focus on the four main actors, JM, NCC, PEAB and Skanska.

The industrialized timber housing process is capable nowadays to build multi-storeyhouses since fairly new changes in the Swedish regulations where made after theadmission of the European Union in 1994.The industrialized process moves parts of the construction process into a highlyeffective factory where 3D-volumes of the building are prefabricated beforetransportation to the building site for assemble.The assembly process is relatively effective compared to the completion of thebuilding service system and this is therefore the main focus in this thesis. This thesisattends problems with completion of the building service system, and thereforedemarcates from other aspects, such as technical and economic aspects, of thebuilding service system.The degree of completion of the flats differs from completion of the connectivepassages, for example hallways, in a way that suggests a need for further investigation.This thesis includes analysis of the possibilities to increase the prefabricatedconnective passages, to the extent of containing building service systems.An increase of the Prefabrication of the building service system has a greatdevelopment potential, even though some restraining factors need to be solvedbefore implementation.This thesis was made in collaboration with two of Sweden?s leading companies on themarket of multi-storey industrialized timber housing, Moelven ByggModul AB andLindbäcks Bygg AB..

This project has been created with the assistance of Fredells. Fredells is a Stockholm based company with a focus on the retail of building products. Fredells also produces prefab- or prefabricated products which are either completely or partially ready for assembly the moment they arrive to the building site. These prefab-products are primarily delivered to customers within the Stockholm region. The building industry is a conservative market where the incentive to changes has been relatively low compared to other industries.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and Prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

Den bostadspolitik som förts de senaste två decennierna har gett oss en alltmer segregerad stadskärna i Stockholm. Byggsubventionernas avveckling på 90-talet har lett till en historiskt låg byggtakt och ett byggande som ensidigt riktat sig till resursstarka grupper i samhället.Parallellt med detta har stora delar av hyresbeståndet ombildats till bostadsrätter vilket medfört att många relativt billiga hyreslägenheter i äldre fastigheter har försvunnit ur beståndet. Dessa är svåra att ersätta med nyproduktion, då dessa är dyrare.Kärnproblemet är förstås att det är dyrt att bygga hus och om man antar att den nuvarande bostadspolitiken består är det ytterst angeläget att utveckla kostnadseffektiva byggmetoder för att möjliggöra lägenheter med överkomliga hyror som kan bidra till att motverka boendesegregationen på sikt.Vårt förslag består av ett bostadshus i Stadshagen. Fastigheten är indelad i två byggnadskroppar som länkas samman via ett system av loftgångar kopplade till ett trapphus. Husen är uppbyggda av volymelement som staplats på en platsgjuten sockel.

Self-compacting concrete has soon been around for a decade. Recently the Prefabrication industry has started to use this fairly new concrete type in larger scales, mainly because of its distinctive properties.  There are still certain areas that need to be thoroughly examined, such as bond capacity. There have been very few studies regarding shear capacity due to the fact that the procedure is complicated.This report will highlight a method to examine the shear capacity of different surfaces that have been prewetted as well as non-prewetted surfaces. The surface areas follow BBK 04?s and Eurocode 2?s demand for surface roughness.  A smooth surface will be completed in order to confirm if the different shapes influence the bond strength by shear stress or not.                       The purpose of this essay is to measure the bond strength within the shear capacity as well as examine the impact it has on surface roughness and treatment for shear bond.The method used to identify the shear capacity is called L-shaped Push-Off Test.

Järnvägsbron vid Årstaberg kommer när den är klar att mäta 1,4 km, här passerar över 550 tåg per dygn. Bron är en del av projektet Citybanan och kommer att fungera som en spårväxel som styr fjärr-, regional- och godståg till den gamla östra Årstabron. Pendeltågen kommer då färdas på bron över Årstaviken och in i den nya järnvägstunneln vid Södra station.Entreprenaden gick från början till danska företaget Pihl och Son som efter en del problem gick i konkurs, underentreprenören Züblin fick då ta över projektet. Med en ny platsledning gjordes en hel del förändringar på arbetsgången och arbetsmomenten. Från 4 veckor per sektion, där en sektion mäter ca 30 meter lyckades Züblin tillslut effektivisera till 2 veckor.

Injuries and sick-leave is a common feature for reinforcement workers today. This is mainlydue to the fact that reinforcement work is done in an exposed environment with many stressfactors and highly repetitive work. These operations are often carried out in unsuitableworking positions, these positions creates a major burden on the bones and joints and causesmicro- damages on muscles. With repetitive work these injuries are not given time to healproperly and will gradually become worse.The body will not be able to handle the stress of working in a work environment such as thisand musculoskeletal disorders can be a result of this. The injury will make itself known aspain in the musculoskeletal system and causes reduced movability; the injured worker willtherefore not be able to perform the same work tasks as before.

The study aims to investigate the impact of industrialised homebuilding in the creation of the aestheticproperties of the dwelling architecture.The concepts of industrialised homebuilding and the aesthetic properties of the dwelling architecture aredefined by previously developed models. In these models, industrialised homebuilding is described byeight characteristic areas. The aesthetic properties of the dwelling architecture are described by sevenaesthetic qualities.The study was conducted as a qualitative study, and in-depth interviews were conducted. The companyJM AB is the analysed unit that the author of this report has chosen to study. JM employees and by JMhiredarchitects were interviewed.The report concludes that characteristic area planning and control of processes are considered to havepositive impact on the aesthetic qualities if the process is designed in such a way that the creations ofthese are admitted.