The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system..

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

Idag byggs det allt fler cirkulationsplatser i Sverige. De ersätter många signalreglerade korsningar. Cirkulationsplatser lämpar sig dock inte i alla situationer. Ett exempel när det inte lämpar sig är om det passerar ett stort trafikflöde rakt igenom cirkulationsplatsen som hindrar trafiken från mindre tillfarter att komma in i cirkulationen. För att komma tillrätta med problemet kan signalreglering av cirkulationsplatsen tillämpas.

Intresset för småskaliga vindkraftverk på byggnader har ökat under de senaste åren. Allt fler människor blir mer energi- och miljömedvetna samt ser fördelarna med att elektriciteten produceras där den konsumeras; i den bebyggda miljön.Det är dock en större utmaning att installera ett vindkraftverk i urban miljö, jämfört med i öppet landskap, då det finns många faktorer som skall beaktas. Stadens komplexa uppbyggnad gör att vindens hastighet och riktning varierar och ger upphov till turbulenta strukturer i den omgivande luften. Många av dagens vindkraftverk kan ej operera effektivt vid turbulens, därför måste dessa vindkraftverken placeras på höga höjder för att nå den laminärt strömmande vinden över staden, vilket ger orealistiska längder på de master som krävs, även om vindkraftverket monteras på en byggnad. För att kunna utnyttja de vindar som uppkommer i urbana miljöer bör vertikalaxlade vindkraftverk med en helixformad geometri på rotorn användas.

Det pågår idag arbete på många håll för att göra våra bostäder mer energieffektiva, ofta genom tekniska förbättringar av till exempel klimatskärm och värmesystem. En post i energianvändningen som inte alltid får lika mycket fokus är varmvattenanvändningen. Varmvattenanvändningen mäts sällan i flerbostadshus, vilket gör att kunskapen kring den är relativt låg. På senare år har dock allt fler bostadsbolag börjat arbeta för att minska vattenanvändningen och en metod som har blivit allt vanligare är individuell mätning och debitering.I denna rapport redovisas ett examensarbete kring olika aspekter på vattenanvändning i flerbostadshus. Vattenanvändningen i ett bostadsbolag som överväger att införa individuell mätning och debitering undersöktes och jämfördes med statistik från ca 2000 lägenheter i två bostadsbolag som redan infört individuell mätning.