Zetterberg's Industri AB believe that capital and lead time will be reduced by implementing Kanban. Therefore, it was an investigation to prove that Kanban is an effective method. In this work a research had to be done to show how the material supply system looks like today and to explore the subframe Components to see which Components that are interesting from Kanban viewpoint. Previous orders of subframes were investigated. Therefore, it was a list of the various Components of the previous orders for the subframe.

The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed Components on a laminate substrate. The design process for the radio front-end consists of two stages. In the first stage the distributed Components are designed and simulated, and in the second stage all Components are merged into a PCB. This PCB is then manufactured and assembled.

The purpose of this work is to providing a general set of base classes for building simulators, for example a robot system. Instead of every time building a new simulator from the beginning, you get the already completed Components from a library. The library should in that way act as a springboard for development.To do this work, there?s a lot of knowledge required in how a general robot system could look like. Therefore it was necessary to gather some information about robotics.

The Uppsala based company Q-linea develops procedures, instruments and systems for protein and nucleic acid analysis. The Components in such an instrument are controlled by microcontrollers. Microcontrollers are computers in one singular chip that can be used in a wide range of applications such as cars, toys or in this case an analysis instrument. When developing a new instrument for biochemical analysis, Q-linea needed new software for controlling and communicating between the Components in the instrument. The process of developing this software is the subject of this thesis.The project included research of microcontrollers and the Components in the instrument.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic Components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic Components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic Components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic Components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic Components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

This paper investigates a number of Components that influence the relationship between consultant and client in a procurement process of ERP. The paper deals with Trust, Commitment, Cooperation and Satisfaction. The problem lies within the fact that consultants do not know how and to what extent the Components affect relationship quality. Based on the theories in the areas of procurement, relationship marketing and relationship quality, information has been gathered about how the various authors believe a procurement process works, how they view relationship marketing and how relationship quality is created. The Components discussed are trust, commitment, cooperation and satisfaction.

The industrialization of construction is increasing in Sweden which leads to higher demands of prefabricated Components and cells. But what does the business of construction think of the industrialized business and what can be done in order to decrease faults and errors with these products? Today we have many manufacturers who have different technical solutions which might lead to difficulties when assembling Components and cells at the building site. But by trying to make a more opened market, with possibly standardized connections details and improving the communication between the different participants, the prefabricated Components and cells can be made and assembled with less errors. This is something that needs to be done in order to establish a more secure business, and especially when working with new companies and methods, when using industrialized products..

Rapporten undersöker Volvo Construction Equipment Components axelmontering för axlar till Dumper och Hjullastare. Arbetet har utförts med intervjuer, studiebesök på andra fabriker och en detaljerad studie av monteringsavdelningen och dess angränsande avdelningar vilka levererar artiklar till monteringsstationerna. Undersökningen har resulterat i ett förslag där fördelarna av en stationsbaserad montering och fördelarna med en linjemontering kombinerats. Arbetet presenteras i rapporten och i en dator animerad 3D simulering av förslaget till en ny monteringslayout. Jag anser att Volvo CE Components och montörerna på monteringsavdelningen skulle gynnas av monteringslayouten som redovisas i rapporten..

The aim of this study is to investigate leadership in sports organizations and business organizations. The study focused on common and important leadership Components and the most important leadership processes in both business context and sports context. The study also investigated common and important leadership Components, leadership challenges and which degree leaders used the transformative leadership. The study focuses on leadership Components most importantly from the leaders view, including both sport managers and business leaders. The investigation was based on eight interviews, which are analyzed with content analysis.

In Sweden there are many kinds of effort given youths with behavioral problems, one is institutional care. International research display a varying kind of results from this type of treatment. The aim of this study is to examine and illustrate which central Components that results in positive treatment, but also starighten important Components in KBT. On the basis of research results, important Components for positive treatment have been illustrated as; the therapeutic relationship, the integrity of treatment, prosocial-contacts, positive climate in treatment, the continual of treatment, how to bring treatment to an end, the responsivity principle-the principle of need-the risk principle, learning and KBT.  Research also aims to investigate whether these Components could be identified in the daily work of youth treatment on institution. This through a qualitative approach including six interviews held with staff working in treatment facilities.

Free2Move AB is developing products for the market within wireless communicationand identification, among those active RFID-tags. The company had an idea aboutproviding one of their active RFID tags with a GPS receiver and transmit positions viaan existing RFID protocol. Desire from the company was also the possibility to logpositions and measure temperature. The finished prototype should also be able to beactivated by movement. The company had proposal about Components that were to beused in the project.

Two ecological models of nitrogen processes in treatment wetlands have been evaluated and compared. These models have been implemented, simulated, and visualized in the Modelica language. The differences and similarities between the Modelica modeling environment used in this thesis and other environments or tools for ecological modeling have been evaluated. The modeling tools evaluated are PowerSim, Simile, Stella, the MathModelica Model Editor, and WEST. The evaluation and the analysis have been performed using McCall?s factors for software quality (McCall et al, 1977), a correlation analysis and the Constant Comparative Method (Glaser&Strauss, 1999).

Examensarbetet har genomförts på ABB Components i Ludvika. ABB Components är en affärsenhet inom ABB-koncernen som tillverkar nyckelkomponenter till transformatorer, bland annat genomföringar som kan ses som en isolerande hylsa vars uppgift är att föra högspänd ström genom jordade plan.Examensarbetets syfte är att utföra en förstudie som sedan ska fungera som underlag för ABB Components utvecklingsarbete vad gäller genomföringar av typen RIP (Resin Impregnated Paper). Bakgrunden till förstudien är ökade miljökrav världen över vilket innebär en marknad där miljöfrågor får allt större inverkan. Följden av marknadens utveckling är att ABB Components har insett att de har ett glapp i produktportföljen vad gäller genomföringar av typen RIP.För att skapa det underlag som är nödvändigt för att nå målet med förstudien har metoder som intervjuer, observationer och sökningar i databaser tillämpats. Målet med förstudien har sedan uppnåtts genom att generera lösningskoncept i form av CAD-modeller.

Too much attention has been given to mainstream approaches in performance management and management accounting research, without taking in to account changes in the environment with the rapid growth of online retailing. This paper evaluates how and/or if performance management differs in online contexts by using a conceptual model developed by Ferreira et al (2009). The model and its Components are tested on three multichannel- and six e-commerce businesses. The result and its analysis is commented on by two e - commerce experts. The result shows that the operation method of the models twelve Components do not differ in terms of work methods in online and offline contexts.

The purpose of the present study was to get further knowledge about the relationship between transformative and transactional leadership in the context of employee ?s well-being, as well as the relationship between the Components of respectively leadership and employee?s well-being. The study also aims to gain knowledge about previous research on the transformational and transactional leadership and employee well-being and if it?s applicable in the Swedish culture. The few studies that studied the relationship between transactional leadership and the well-being of employees have found a negative relationship or found no relationship at all.