Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the Bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

This master thesis was carried out at ELFA, one of the largest catalogue distributors of electronics in northern Europe. ELFA offers a wide selection of products such as measuring instruments, fuses and screwdrivers. The master thesis handles the possibilities of an increase in the internal flow of products. The background to this problem is ELFA?s acquisition of two new companies, which brought the product range in the warehouse from 55 000 to 80 000 products.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a Bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the Bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the Bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

Husqvarna AB operates two warehouses located in the area of Jönköping. The most important task is to manage the large volume fluctuations during the peak season. DHL Exel Supply Chain (DESC) run the warehouses and the domestic transportations is outsourced to DHL Express. A number of forwarder agents are responsible for distributing the export gods. In the present situation a Bottleneck occurs at the warehouse loading section, and the consequence is fulfill the time of delivery for all customer orders.

In modern health care, the quality registry is anexcellent tool to monitor everyday work. Collected data forms a foundation, presented as online reports, from which local work efforts to refine care quality can be performed. All reports are coded manually by specially trained developers. This is a tedious process and hence becomes a Bottleneck in the strive for improvement.This thesis evaluates whether an extended way of dealing with reports can fit into the existing work situation, with main focus on the idea of creating custom reports directly within a quality registry. It provides a set of conclusions regarding today's usage of reports as well as the users' general and specific needs within the area.

Most companies have a Bottleneck in their production, that is a constraining re-source. When the demand is higher than the capacity in the constraining resource it is impossible to produce the demanded output. This problem leads to delayed deliveries, unhappy customers and ultimately to decreased revenue. Bottlenecks therefore has a significant role in production and must be handled thereof.MW Power in Sävsjö, Sweden designs and manufactures water and steam boilers for the customer's unique needs. MW Power invested in a new plasma cutting ma-chine but the machine has not reached the expected capacity.

Examensarbete utfördes på CA-Verken i Sävsjö som bl.a. tillverkar hydraulcylindrar. De senaste två år har CA-Verken haft en kraftig ökning av omsättningen och det som står i vägen för fortsatt expansion är produktionen som har begränsad kapacitet.Målet med detta arbete är att studera CA-Verkens produktionsflöde för att kunna identifiera flaskhalsen/flaskhalsarna och därefter ge förslag på lösningar och förbättringar. Den teorin som har använts som grund till arbetet är Theory of Constraints (TOC). Intervjuer, företagets affärssystem och observationer har använts vid datainsamling.

Our report procedure identification of instability and disturbance in an automatic manufacturing line of processing and assembling of chair sliding rails at Sapas manufacturing department in Vetlanda.To obtain a stabile ground we have mapped the material flow to receive a comprehensive view and to visualise connections.We have examined cycle times at different stations in purpose to identificate Bottlenecks. The result of our examination showed that the Bottleneck of the line was the brush station. This leads to that the expected Bottlenecks identificated by Sapa gets a delay time and by that a longer cycle time.Interruptions has a clear negative influence at the line performance so we have also assemble data through the operators report list and compiled these in order to find out the interruptions effect on the line. The outcome during our assembled period was that the reported interruptions corresponded about 30 percent of the total available production time. This has a clear negative effect on the line productivity and efficiency as we have calculated in order to get the present status..

This report is commissioned by the Water and Sewage Agency in The City of Mariehamn, Åland. The basic aim is to investigate positive or negative effects of a relocation of the sewage pipe from a wastewater treatment plant, Lotsbroverket. The environmental licence of Lotsbroverket is to be revised and The Environmental Appeal Board at Åland?s Government and Administrative Board has made demands that several possible locations in an outer water area should be examined. The present location of the sewage pipe is in Svibyviken, which has been classified as an ?inner water area?.The objective of this work is to study to which extent the nutrient loading from Lotsbroverket influence the environmental conditions in Svibyviken, and to investigate the suitability of different locations of the wastewater pipe from Lotsbroverket.The way a coastal area looks, i.e., its morphometry, determines to a large extent its ecological characteristics.

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the Bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

In an effort to evaluate the effects of restorations of float ways on population density of stream dwelling fish in relation to the changes in habitat, I studied the physical habitat restored and channalized sites and their population density of brown trout (Salmo trutta L.) in three streams in the municipality of Sorsele. The differences between the channalized and the restored sites where most noticeable regarding substrate which where generally coarser in the restored sites. The analyses showed that the proportion of habitat that where suitable to the age class 0+ where significantly lower in the restored sites compared to the channalized sites. Regarding age class ?2+, no statistical differences in habitat quality were found.

Company X develops a laboratory information system (LIS) called System Y. The informationsystem has a two-tier database architecture consisting of a production database and a historicaldatabase. A database constitutes the backbone of a IS, which makes the design of the databasevery important. A poorly designed database can cause major problems within an organization.The two databases in System Y are poorly modeled, particularly the historical database. Thecause of the poor modeling was unclear concepts.

The company is currently in a stage of improvement and has therefore taken the help of students at School of Engineering, Jonkoping University. The current production is batch, production layout is fixed. A Bottleneck is created after the first station which leads to large efficiency loss.  The meaning of this report was to provide a layout suggestion with balanced workstations to a new production line. The conditions were that the production line would be one-way, driven by customers order and meet a demand of 40 products per week.

ABSTRACTBackground: The incidence of type 2 diabetes is increasing worldwide. Early intervention in form of medication, advice on self-management and lifestyle changes is necessary to avoid complications. Few Swedish studies are made on the diabetes nurse?s views on promotion of self- management.Purpose: To examine the diabetes specialist nurse?s experience of promoting self-management to patients with type 2 diabetes in primary care.  Method: A qualitative explorative study where eight diabetes nurses were interviewed. The interview guide consisted of semistructed questions concerning the promotion of self-management.Results: The diabetes nurse?s role in promoting patient self-management is significant, if resources are available in the form of adequate time for the patient and good team work.