Österbyverken is an industrial estate in Östhammars municipality in Uppland, Sweden. Many different activities have taken place on the estate the last 600 years. During the last 15 years both health and environmental studies have been made by different companies. At the most recent study a great increase of metals in Nerån, a river that runs partly through and partly next to the estate, was identified with mass balances. The purpose of this thesis is to accomplish a deepened study about the reasons for the increase of metals in Nerån.

The classic view of trout (Salmo trutta) life history is that trout begins its life in freshwater, migrates to the ocean after about 1-4 years and then returns to freshwater to spawn. As trout fry have been caught at the mouth of the River Emån, near the Baltic Sea, researchers have speculated that some trout emigrate during their first year of life. The purpose of this study was to describe the variation in the length of time trout reside in freshwater before they migrate to the ocean for the first time. Another purpose was to investigate whether it was possible to discern where and how long the fish spent in freshwater and saltwater during different parts of their lives. Between 2007 and 2009, 23 adult trout were captured in the River Emån in southeastern Sweden.

During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

The purpose of this report is to document the experiments carried out, methods used and results gained during research into how the silicon content of an aluminium alloy affects the coefficient of thermal expansion (CTE).The goal of this paper is to better understand and to find a relation between silicon content and the coefficient of thermal expansion.Experiments were carried out using carefully prepared samples of Al Si alloys (0, 7, 10 and 20% Si content). Using these alloys, the CTE could be measured using a dilatometer.Comparative analysis carried out could map the effects of silicon content on the coefficient of thermal expansion and an equation was created. Using simple graphs and the rule of mixture method, the authors were able to build a simple tool for calculating the CTE of specific aluminum silicon alloys..

This study has been done in order to map the supply of vegetarian and vegan food products in Sweden for business clients and consumers. A total of 665 food stuffs were found and classified into six categories. The biggest category was meat substitutes with 302 products and the second largest category was sandwich spreads with 150 different products. Within the remaining categories a varied number of products were found; 86 beverages, 64 cooking accessories, 34 milk free ice creams and 29 plant based yogurts. Of the meat substitutes were 28 only available for business clients.

This study has been done in order to map the supply of vegetarian and vegan food products in Sweden for business clients and consumers. A total of 665 food stuffs were found and classified into six categories. The biggest category was meat substitutes with 302 products and the second largest category was sandwich spreads with 150 different products. Within the remaining categories a varied number of products were found; 86 beverages, 64 cooking accessories, 34 milk free ice creams and 29 plant based yogurts. Of the meat substitutes were 28 only available for business clients.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

Varmvalsade HSLA-stål (high strength low alloy) uppvisar normalt en lägre hållfasthet i sista änden av bandet. Denna s.k. ändeffekt har länge varit känd och flera undersökningar har genomförts för att utvärdera hur mycket de sistametrarna minskar i hållfasthet. Materialet som undersökts i detta examensarbete är Domex 700MC. DX 700MC är ett extra höghållfast kallformningsstål och dess typiska egenskaper är: ? Utmärkt formbarhet i förhållande till sin höga hållfasthet.

Storm water is defined as runoff from precipitation such as rain or snow. It is collected in sewage disposal systems and since it mainly originates from urban areas it can contain high levels of heavy metals, nutrients and oil etc. Polluted storm water is currently treated by different methods such as wet ponds, constructed wetlands and filter strips. This study investigates these methods, which in earlier studies have shown to give varying results regarding their treatment efficiency.This thesis has been written on commission of SWECO VIAK and was aimed at studying those parameters that may affect the treatment efficiency of nutrients and heavy metals in storm water treatment facilities (STF:s). Through literature studies the dominating treatment processes in ponds and wetlands were examined.

Landfill leachate contains a variety of contaminants and is created when rainwater percolates the landfill. For landfill management the leachate is the main issue that can cause problems to the environment. At the landfill of Fläskebo, Renova AB treats the leachate in a local treatment plant. The treatment consists of a chemical treatment step with chemical precipitation, flocculation, sedimentation and filtration, and a final step with a carbon and peat filter. Renova has to ensure that the condition of the leachate reaches the regulation set for the landfill before it is released to the recipient.

Förorenat dagvatten från Stena Gotthards metallåtervinningsanläggning i Eskilstuna har filtrerats genom kolonner innehållande två olika adsorbenter, torv och furubarksflis. Torv är en organisk jordart som främst används som bränsle och furubarksflis är en biprodukt från skogsindustrin. Båda filtermaterialen är relativt billiga och finns i stora kvantiteter i Sverige. Filtermaterialen har visat sig ha varierande kapacitet att adsorbera metaller i vatten på grund av själva materialet samt vattnets sammansättning. Resultatet från den här studien visar att av de två undersökta filtermaterialen så har furubarksflis störst kapacitet att reducera bly, koppar och zink från det specifika dag vattnet..

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

The municipality of Västervik, with support from Envipro Miljöteknik AB, is carrying out a main study of the minefields at Gladhammar. Mining of iron, copper and cobalt under different periods from the 16th century until the end of the 19th century has led to discharges of metals to the lakes situated downstream. The aim of the main study is to investigate the possibilities to reduce the environmental load on the surrounding ground and water caused by heavy metals from the mine. The present report is a part of the main study. The aim of the work is to investigate the geochemistry of the groundwater.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

Dagvatten från vägar innehåller ofta tungmetaller. De vanligaste metallerna i vägdagvatten är bly, koppar, kadmium, nickel och zink. Dessa föroreningar utgör en belastning i recipienter som tar emot dagvattnet. I denna rapport har bly, koppar och zink reducerats från vägdagvatten genom filtrering i kolonner med amorf, granulerad masugnsslagg och sand. Masugnsslagg, som är en biprodukt från framställningen av järn, är en alkalisk produkt med goda sorptionsegenskaper vilket gör den lämplig att använda som filtermaterial för vatten förorenade med metaller.