Theoretically, when an organization grows large it has to formalize its structure and exercise control by more regulations. The negative side effect might in turn be demotivated employees (machine bureaucracy). However, practice seems to contradict theory. Therefore, we decided to investigate how a large company, in this case Microsoft, succeeds in creating motivation despite some machine bureaucratic tendencies. The essential findings are that the employees feel motivated by the fact that they are allowed freedom with responsibility.

Swedish Trotting association was formed in 1925. They are the ones who design the regulations concerning what is permissible and not permissible for the horse, driver and trainer, when they have a license at a Swedish racing track. The Veterinary department of Swedish Trotting association decides in consultation with representatives from veterinaries around the country what is allowed and not allowed, based proven experience, combined with the availability of scientific data and Veterinary Department's own assessment. After stricter regulations for good animal welfare from the Swedish government, Swedish Trotting association is going to work out a workable model for how new equipment can be tested in the future to see how the equipment affects the horse. In the future, all equipment will be objectively tested before approved. The purpose of this work was to develop a well-functioning model for this. The research-question for this work is: Is this study design a well-functioning model of how the equipment should be tested in the future? The equipment used for designing this model was bitless bridle with a bit.

 Abstract  Interest in Lean grows and spreads to the public from industrial and service sectors. Lean is currently used in administrative processes and it is called Administration but can administration be Lean? The aim of our study is to develop a useful model for a successful implementation of Lean Administration by using various scientific articles, books and information from the case study.The part of the purpose is to: ? Identify critical success factors that arise? Identify the challenges arising from the implementation of Lean Administration.We have studied a Division within Distribution at GE Healthcare in Uppsala. The model that we have developed provides challenges and success factors for a successful implementation.In order to succeed in implementation, a culture that promotes continuous improvement must exist in the organization. A key success factor is to understand Lean Administrations structure and principles.

The purpose of this master thesis is to investigate if the mobile library has a similar role as the public library. To study this further we intend to examine the value and function of the mobile library. Answers are sought to the following questions: Can the mobile library be seen as a public library in a smaller scale? How do the users experience the value and function of the mobile library? What does the library staff think of the value and function of the mobile library for the users? What would the consequences be if the service of the mobile libraries would not exist? The method used was qualitative interviews. The groups of respondents are mobile library users and library staff.

Svenska Kraftnät is (together with the other transmission system operators of the Nordic power system) responsible for keeping balance between the generated and demanded power in the Nordic power system. Spontaneous load variations and system disturbances, however, lead to power imbalance followed by frequency variations. The frequency deviations can be limited to an acceptable level by the spinning reserve, mainly by hydro power control. But there are also other system properties which have a great influence on the frequency and system stability. The frequency and voltage dependence of the loads have a direct influence on the power balance.

The aim of this study was to investigate whether there is a correlation between birth order, academic performance and need for achievement. 166 students from Alvesta Gymnasium/ High school and Växjö Fria Gymnasium/ High school participated in the study. The result showed a significant correlation between birth order and study result, but unlike previous studies this study showed that it was the youngest siblings that had the best academic performance. Furthermore, a significant correlation between academic performance and need for achievement was found, also that higher need for achievement results in higher academic performance. The study also showed that there is a significant correlation between birth order and need for achievement, and it is the youngest children that have the highest need for achievement.

The purpose of the study is to explore how social media can be used as a forum to discuss politics and also how young people use critical reflection to evaluate the information available on social media. To achieve the purpose, a qualitative research is used. The empirical data is collected through semi-structured interviews with six high school students who voted in the Swedish parliamentary elections in/of 2014. The empirical data were then analyzed based on previous research on social media, and the school's mission to foster individuals who think critically. The analysis is also based on the theory of deliberative democracy model.

A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.

Syfte/Purpose Syftet med uppsatsen är att undersöka sambandet mellan aktiens omsättningsvolym och dess avkastning under olika marknadsförutsättningar./The purpose with this essay is to observe the correlation between the stock turnover volume and the return under different situations on the market. Metod/Method Den metod som jag har använt mig av är en kvantitativ undersökning. Genom att utföra en kvantitativ undersökning har jag gjort det möjligt att undersöka ett stort antal aktier. Jag har jämfört utvecklingen av 60 stycken, slumpmässigt utvalda, aktier vid både en positiv samt negativ trend av index./The method that I have used is a quantitative study. By execute a quantitative investigation I have been able to study a large amount of different stocks.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

In society and school today there is a major focus on assessment, and this can for example be seen in an increased research on assessment over the last ten years. But one research topic still quite unexplored is how students perceive assessment. The main purpose with this study is to explore students? experiences of assessment, how assessment interferes with their volition and if the extent of the impact on the motivation varies depending on how the assessment is performed. In order to answer these questions a quantitative investigation was performed at first. 83 students answered a questionnaire about what kind of assessment they experience in school, if they receive feedback, what is important for being successful in school, if they know on what grounds they are assessed, what impact failure and/or success has on their motivation, if they are stressed by school etc.

An instrument for assessing children's attitude towards speech,communication, and communicative participation suitable for children withcleft lip and palate has been missing in speech- and language pathology. Inthe present study a new instrument Självsvarsformulär Om Tal OchKommunikation was tested on typically developed school children. The aimwas to obtain norm values for children in grade 4 and 7 and to examine thereliability and validity of the instrument. 104 children participated. Data wascollected in groups of 5-6 children.

GE Healthcare operates in Uppsala (Sweden) and develops systems, equipments and medium to purify medical substances. Discussions with the local authority concerning planed far-reaching changes and upgrades of the biological process techniques for sewage management, aroused the question about revising the terms of permit for the activity. Therefore it seemed necessary to evaluate a newly installed biological process technique, which is the background of this thesis. The evaluated biological treatment process was built in 2003 and consists of a biological reactor filled with moving bed carriers with a high surface area for biological growth. At the time of the project the biological wastewater treatment plant consisted of a flow equalization facility and two following parallel biological processes; a biological reactor with moving bed carriers and a tower trickling filter.The aim of this thesis was to survey the function of the biological reactor with respect to the reduction of organic matter.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..