Properties are bought and sold daily, which means that it is of great importance with rules that regulate the acquisition. The rules on who should be held liable for a property brought to a head when the acquisition relates to a property that is loaded with contaminated soil. The purpose with this thesis is to investigate who could be held liable for contaminated land and also whether an exclusion clause can affect the separation of responsibilities. Two different liabilities can occur depending on which law that should be applicable, MB or JB.MB's rules apply to anyone who may be subject to decontamination responsibilities, which is regulated in Chapter 10. MB.

Tile covered bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction frommoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedbathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Tumour development occurs to a large extent because of dysregulation of the cell cycle. Of particular importance are defects occurring in the G1 phase. The reason why G1 is critical is because of the influence of several signals (external signals as well as cyclins and cdks) on this stage. The G1 phase can be divided into two parts, G1pm and G1ps. Each part has its ?own? restriction point which needs to be passed in order to progress to S phase.

The aim of this study was to describe the prevalence of gingivitis, periodontitis and dental caries in individuals with type 2 ? diabetes. The study was conducted in a form of a general literature review with the restricted to the following conditions: human studies, English, and articles published between 2007 - 2012. Articles lacking a control group were excluded. The data were collected through searches of the medical database PubMed. A compilation of 11 scientific articles was examined.

Today?s environmental discussions have led to more progress in the different transportareas. To ride a bicycle is often one of the most efficient alternative when it comes totransport. An Electric bike is, and makes transportation more efficient than a regularbicycle. Electric bicycles do not affect the environment significantly and allows moreconvenient transportation than ordinary bicycles do.

In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

The thesis evaluates a new kind of bearing arrangement in a traction motor that ABB hasdeveloped. Since the arrangement is designed in a new and innovative way it needs to beevaluated to see if it is safe to use. In today?s traction motors, bearings with a big internalclearance (C4-clearance) are used. The basic idea of the new arrangement is to reduce the fitsbetween the bearing and shaft/house.

Background: The standard of living should be the same for everyone, whether the apartment is placed in an old or new building. The residential properties that were built from 1965 until 1974 is now beginning to become old and in need of restoration. The financial crisis during the nineties contributed to the lack of maintenance on the buildings in Sweden. As the public buildings gets older more and more defects occurs. The coordination and maintenance will therefore have a more significant role in the housing company ?s work.The increasing interest about how old a building can be, attract much attention.

Vid nybyggnation av bostadshus och vid vissa bygglovspliktiga ändringsarbeten föreligger ett lagstadgat krav att byggfelsförsäkring skall tecknas. Försäkringen omfattar kostnader för att avhjälpa fel som uppkommit under byggtiden och syftar till att snabbt avhjälpa fel och brister utan långvariga tvister om vem som skall ta på sig kostnaden för att undanröja bristerna - en god tanke som dessvärre verkar fungera sämre i verkligheten. Lagen innehåller nämligen flertalet bestämmelser om tillåtna ansvarsbegränsningar vilket lett till att det vid flera situationer inte föreligger någon rätt till ersättning trots att det är rimligt att anta att skadorna skall täckas av försäkringen.Denna uppsats syftar därmed till att beskriva, belysa och analysera byggfelsförsäkringens tillämpning för att på så sätt komma fram till om syftet med lagen verkligen upprätthålls så som lagen är utformad idag eller om lagen borde ändras och i så fall på vilket sätt den borde förändras.Efter att ha studerat gällande rätt och föreliggande försäkringsvillkor har jag funnit att byggfelsförsäkringens tillämpningsområde är väldigt snävt och därmed borde utvidgas för att lagen skall vara helt ändamålsenlig. Jag anser således att utvecklingsfel borde omfattas av försäkringens tillämpningsområde för att byggherren skall erhålla ett fullgott skydd för byggfel. Jag är även av den uppfattningen att konsumenter som väljer att själva uppföra sitt hus utan olägenheter kan uteslutas från försäkringsobligatoriet då försäkringen medför minimal nytta för dessa..

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

One of the most serious and economically important defects caused by clostridia in milk products is the late blowing of semi-hard cheeses.Clostridia occur naturally in soil and can contaminate milk through crops contaminated by dung and soil followed by a less successful silage process, that give them opportunity to grow unaerobically. When anaerobic conditions occur, such as storage of semi-hard cheese, they ferment lactic acid to butyric acid and the gases CO2 and H2.At the fusion of Arla and MD Foods, a series of changes were conducted on the MPN method for lactic acid fermentation for clostridia in milk. These changes resulted in an increased accuracy due to an increased number of test tubes and the change of media from MRCM to BBB, Bryant & Burkey Broth, that was thought to be more selective for Cl. tyrobutyricum, the organism mostly found in hard cheese. When the number of dairy farmers that were given quality reduction fines increased, the new method was suspected and a validation was conducted.The validation included inoculation of different clostridia and bacillus strains into BBB substrate and enzymatic testing of positive samples with Rapid ID 32A.