Purpose: The purpose of this thesis is to examine the ERK model's relevance, validity and potential need of development to better reflect how it looks today (2013). Method: The study is conducted through three surveys; the first two were face interviews with companies that sponsor Swedish soccer teams and the third study was conducted with a questionnaire to supporters outside a soccer stadium. Results: A model that would better reflect the reality of today (2013) could contain company pride, chairman?s whim, exposure, relationships and associations..

To enable the enhancement of the driver's environment in a forklift, an alternative form of steering has been evaluated. An earlier concept with a combined driving and steering wheel has been exchanged to a concept with two driving wheels. A link wheel has replaced the combined driving and steering wheel. The steering is done through differentiation of the velocities of the two driving wheels. The scope of this master thesis is to create a simulation model, create a control program and to evaluate the concept of two driving wheels.

The objectives of this experimental study were to investigate if a strategic method to supply loose housed sows with large quantities of straw 2 days before expected farrowing and if the sow?s body condition had any effect on the occurrence of shoulder lesions 5 weeks after farrowing. Data came from a study conducted on four commercial piglet-producing farms in southwest Sweden between March and December 2009. At each farm one batch of sows was followed during two consecutive lactations. The sows were randomly assigned to two different treatment groups and the sows that remained in the batch during the second lactation switched treatment group.

The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The aim of this paper is to examine the capacity for ethical reasoning of Swedish certi-fied auditors in the five largest accounting firms in Stockholm, and also how ethics courses affect the auditors' ability to ethically statement. To calculate the auditors ability to ethical statement, questionnaire has been used. The questionnaire is based on a psychological instrument, the so-called Defining Issues Test. At the beginning of the questionnaire some questions are asked about the ethics courses. From the questionnaire a calculation was made of an average index called p-score (Principled score).

Organisations tend to focus more and more on product and process development to increase their competitiveness. Several major organisations, among them ABB, have developed models aimed to more effectively control and manage product development processes. ABB is using its standardised model ABB Gate Model for this. The purpose of this thesis is to analyze how the introduction of ABB Gate Model has affected the outcome of decisions and also the decision-making in the product development process. The study is limited to elucidate the version of ABB Gate Model handling product development projects.

The purpose of this paper is to analyze the ongoing changes in German family policy. It explores the issue of whether the German welfare state, in this policy field, can still be regarded as a conservative welfare model or rather approaches a more liberal or social democratic model. A qualitative method is used to analyze the material, especially from the German government, including press releases, other public documents and also articles from the political weekly magazines Der Spiegel and Die Zeit. The changes analyzed are the new parental benefit, the expansion of child care, the concept of whole-day schools and the system of joint taxation. The point of departure is Gösta Esping-Andersen?s categorization of three types of welfare states: the social democratic, the conservative and the liberal.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

This is an empirical cross-sectional study with the aim to examine the patient?s comprehension about their quality of life within two to seven years after their stem-cell transplantation with reference to physical, social, emotional, psychological and functional wellbeing and to investigate if the patient groups have disease specific problems. Differences in quality of life between men and women and also between allogeneic and stem cell transplantation with an unrelated donor (URD) were studied. The measurement Functional Assessment of Cancer Therapy (FACT) and the bone marrow transplant subscale (BMT) is a 49 item, valid and reliable measure that was used. The questionnaire was answered by 43 of 47 patients (91%).There is a significant difference between men and women in physical, social and functional wellbeing.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

Problem: Konkurser drar med sig höga kostnader på olika sätt, och genom åren har många försök gjorts att finna modeller som kan förutse konkurser och därigenom undvika dem. Några av de mest beprövade modellerna är Altmans olika Z-scoremodeller, som genom åren visat olika resultat. Allt fler företag blir också verksamma inom tjänstesektorn, och forskningen menar att dessa företag skiljer sig från tillverkande företag när det gäller dess nyckeltal, vilket alltså borde påverka möjligheterna att förutse konkurser enligt de modeller som idag finns.Syfte: Kontrollera huruvida Altmans Z´´-scoremodell fungerar på små- och medelstora tjänsteföretag i Sverige, men även om korrelation mellan ett företags kreditbetyg och dess Z´´-score föreligger.Metod: Uppsatsen är skriven utifrån ett positivistiskt synsätt med deduktiv ansats, och bygger på kvantitativ sekundärdata. Analyser görs genom hypotesprövning.Slutsats: Altmans Z´´-scoremodell fungerar dåligt på tjänsteföretag inom segmentet små- och medelstora företag i Sverige. Resultatet blir detsamma, även om modellen tillämpas på    tillverkande företag och handelsföretag.