The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

This thesis is an evaluation of a new design concept for statorfeets in Gallejaur hydro power plant. Founder of the work is Vattenfall AB Vattenkraft. During the 70- and 80´s nuclear power began to be phased in to the Swedish grid, which meant that hydropower became an important source of rules. The generators began running in so called intermittent operations instead of basic operations, which meant 300-600 start/stop per year instead of one-ten numbers start/stop per year. In order to deal with the thermal forces that arise at every start and stop suppliers began to mount so called sliding joints, which is to take advantage of these forces and maintain the stator shape.

The aim and goal of this work has been to design and implement a voltage reference network for a 12-bit PSAADC, Parallell Successive Analog to Digital Converter. A chip containing the design has been sent away for fabrication. Because of the long processing time, no measurement data are presented. The main specifications for the voltage reference generator is to generate stable reference voltages with low noise and a good PSRR. Efforts has also been made to minimize the power consumption..

In this thesis a transport system is sought after thatif realised in the city of Uppsala could provide bothwell-being to all its inhabitants and sustainability,here jointly refered to as liveability. It is found thatthe car dominated transport system that is inoperation today provides two fundamental values,namely accessibility in both time and space, whichsets it apart from other transport solutions. Thesetwo values are of immense importance for theliveability in our modern world. On the other handthe car dominated system decreases the liveabilityof Uppsala in several different ways. Some of theseproblems, it is argued, could be solved within thecar system, through the adoption of moreenvironmentally friendly cars etc., but otherproblems are inherent in the car system and willremain no matter what changes are made.

Because of increasing demand of power on Malmbanan the capacity of the existing wires which supply the trains must be increased. This increases the stress on the existing poles and for this reason the system for supplying the loads along the railway is to be removed from the poles and be replaced by some other system. This thesis is a study on a two-level low voltage (1 kV and 0.4 kV) electrical system with the aim to investigate if it can be an alternative to the system used today taking into account the voltages, fault currents and costs.In this thesis the following tasks have been performed:? Gathering of data? Description of basic theory? Loadow and fault current calculations of the system with MATLAB? Life Cycle Cost estimate of the system? Analysis and conclusions from the resultsThe results show that the new system can be an alternative to replace today's system. The simulations and calculations show that the voltage drop is at an acceptable level and that the fault currents are large enough to supply a safe disconnection if a fault occurs at the far end of the system..

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

The management of information is a significant competitiveness in companies. Companies stored and save information every day, and it is very common to save de information in different sources. This makes de management of information complex. To mange, monitor and analyze the information, companies can use a system called Business Intelligence. BI system is an analytical system that extracts and converts data into useful information that helps employees to make informed decisions.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

This paper discuss the possibilities to improve the Swedish political nomination system. It brings up some of the values and norms that can be used to change the existing system. Values as openness, the demand of responsibility and also if there is values from the American spoils system that can be used in the Swedish system. A minor purpose is to discuss the part of the parliament within the nomination process. To investigate this I have some theoretical starting points and a self constructed analysis tool.

Human-computer interaction is central for computer assisted development. The aim was to investigate the user experience of a new (U2) compared to an old (U1) computer system, within a cognitive psychology frame of reference. Six subjects, frequently using the system, participated in the study. It was shown that the new (U2) compared to the old system (U1) enhanced and supported more the users? system related procedures/tasks.

An automatic control system for calibration of pressure indicators has been constructed. This control system can be used as a complement to the calibration system located at AerotechTelub, division MainPartner, in Linköping. The calibration system used today contains some not wanted pressure changes, which is compensated by hand today. The new system presented in this report automates the calibrating process and simplifies the calibration. Suitable hardware as motor, controls card and so on have been found and software in the form of Visual Basic program has been developed.

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

Web Services har vuxit i popularitet de senast åren. Användningen av inbyggda systemökar också ständigt, och möjligheten att göra inbyggda system tillgängliga via Web Services öppnar nya möjligheter.Detta arbete visar på möjligheter och problem med standardiserade textbaserade protokoll för kommunikation i inbyggda system med små resurser. XML-RPC och SOAP studeras ur detta perspektiv. SOAP befinns vara mer komplext att implementera stöd för än XMLRPC i den begränsade testmiljön, som har 32kB internminne. XML-RPC visar sig ge fördelar över proprietära protokoll främst när det gäller underhållbarhet och återanvändbarhet..

Vi har undersökt ett verksamhetskritiskt system i en större organisation för att se hur systemet är konstruerat och hur förvaltningsarbetet bedrivs för att undvika avbrott i systemet. Då det är särskilt viktigt att dessa system har hög tillgänglighet har vi försökt lyfta fram faktorer som visat sig vara särskilt viktiga för att uppnå hög tillgänglighet. Undersökningen har genomförts som en fallstudie där vi intervjuat personer med olika befattningar inom organisationen. Vi presenterar även ett antal rekommendationer som vi tror kan minska risken för avbrott i det undersökta systemet..

Under de senaste åren har webbplatser blivit allt mer komplexa och informationen som ska visas och hanteras allt större. För att underlätta hantering och administration av dessa system har många CMS-system vuxit fram. Dessa system kan skilja sig mycket beträffande pris och funktionalitet, allt från mindre open source system till stora komplexa kommersiellt drivna system. Detta arbete bygger på att skräddarsy ett CMS-system för administration och hantering av innehåll på diverse artist sidor, som hanteras av ett medieföretag. Systemet använder tekniker som JavaScript, PHP, MySQL som grund för dess uppbyggnad.