This thesis is a case-study of an ongoing court case between the Swedish Competition Agency and Växjö Municipality about a set-up requirement to the long-distance heating system for newly built private houses on municipality owned land. This requirement was set up as part of the municipality?s long-term environmental goals; however the Competition Agency claims that the demand is damaging the free market in the municipality. The purpose of this thesis is to determine which normative assumptions the decision makers have based their actions and re-action on, and whether or not these assumptions are valid, thru theoretical ideal types. This is determined via method of textual analysis.

There are a lot of different sounds in our sound saturated time. Noise is an unwishable soundand a high sound level can give short- or lingering problems for both children and adults.The purpose was to find out if and in that case why children and the activity at the pre-schoolaffects by a high soundlevel. Another purpose was to examine what the effects would be if thepedagogues set about the work to get a good sound environment at pre-school.The investigation was accomplished in shape of qualitative interwievs where six pedagoguesfrom different pre-schools answered questions about a high soundlevel.All of them have been educated to hearing pilotes.The result of this investigation shows that some pre-schools have a high sound levels but notall of them. In those cases where there is a high soundlevel are there often too many childrenat the same place on the same time. That makes the soundlevel even higher and both childrenand adults are getting tired.By improving the sound environment at the pre-school both children and adults often gets abetter activity.Keywords: high soundlevel, hearingpilot, noise, affects on children..

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Background: The basis for a price valuation of a company is dependent on both its assets net worth and earnings calculations. While the assets are an important part of the valuation of a company, it is important that the valuation is reliable and resource usage can be measured and allocated to each time period. Purpose: The purpose of this essay is to illustrate the difficulties when valuating and allocating own produced fixed assets. Accomplishment: We have chosen a case study where the aims are to understand and explain the difficulties with valuating and allocating own produced fixed assets. The research is based on nine personal interviews.

Syftet med studien är att få djupare insikt i sångpedagogers syn på Time och Sväng samt hur de didaktiskt arbetar med dessa aspekter. Det saknas mer omfattande forskning inom området. Med detta i behåll har jag för avsikt att få djupare insikt i frågeställningar som rör olika förhållningssätt till hur sångare kan öva upp Time och Sväng samt vad Time och Sväng innebär, generellt och i ett undervisningsperspektiv. Studien har som sin teoretiska utgångspunkt ett sociokulturellt perspektiv med fokus på hur människor använder olika redskap för att kommunicera med sin omgivning.För att få svar på mina frågor har använt mig av en halvstrukturerad intervjuform när jag samtalat med informanterna. Alla informanter i denna studie arbetar idag som sångpedagoger; två av dessa är mer inriktade på jazz medan de andra två är mer inriktade på populärmusik.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

Title: How to Construct the Perfect Scandal ? a study of the news reported by Expressen concerning the SD-scandalAuthor: Linnea IvarssonThis C-paper presents the incident concerning the political party Sverigedemokraterna in Expressen in November 2012. The newspaper was the main source of the news reporting with the mobile phone camera film from the occurance and led the way of the news reporting in Sweden about three party members.The paper investigates how the story telling of the so called SD-scandal was constructed, using Critical Discourse Analysis as the analysis method combined with selected parts from the analysis method of critical linguistics. The theories that have been used to establish the results of the analysis are Critical Discourse as a theory based on Norman Fairclough and Teun A. van Dijks theoretical keystones combined with Sigurd Allerns and Ester Pollacks theories and schematic point of view on the constructions of political scandals in media.With the theories and analysis methods above mentioned the results turned out to confirm the theory about how political scandals in media are constructed and designed with certain strategies and agenda.

AbstractTitle: Who said what? ? A qualitative content analysis regarding the UD?s, the government?s and the travel agencies after the Tsunami disaster.Number of pages: 38Author: Malin HanssonTutor: Peder Hård af SegerstadCourse: Media and Communication Studies DPeriod: Autumn 2006University: Division of Media and Communication, Department of information science, Uppsala UniversityPurpose/Aim: The purpose of the paper is to find out what person said what to the media and public after the tsunami catastrophe. The aim is to find out if there is any difference in how the government and communicators talked, and if those differences agree with the public opinion about these persons.Material/Method: The material is interviews with the relevant people on TV news. The first three days are included and the interviews have been transcribed and counted in sentences. The method is therefore quantitative content analysis.Main results: All of the analysed persons used the category Concrete action the most, which is what they are doing at the moment.

This paper is based on a literature review and interviews made with managers in small-scale nurseries for pot plant production. The review helped to identify the worst occupational hazards in pot plant production. The interviews provided a way to investigate how the nurseries act so as to avoid the worst hazards and what they do to even out work intensive periods during the season in order to get a more even distribution of work over the year. According to available statistics problems with back and shoulders are the most common of the physical disorders and the risk for occupational accidents are high for greenhouse workers. Most of the occupational injuries are connected to musculoskeletal problems. The handling of material is often manual and involves frequent lifting and carrying of heavy loads, the strenuous work postures and static muscular tensions these repetitive tasks are associated with causes straining and overloading.

Modern milk production have come a long way when it comes to accommodating the nutritional and physiological needs of the animals, but unfortunately the behavioural and psychological needs of cows and heifers are often left unfulfilled. A long time for eating is beneficial for the digestion and also gives the cattle something to do and decreases the risks for developing abnormal behaviours. An important factor that influences eating- and ruminating time is the particle size of the roughage. The aim of the study was to find out if particle size influences the behaviour of dairy heifers, in particular with regard to eating behaviour and abnormal behaviours. The study was conducted at Uddetorp farm high school in Skara. Forty-two heifers of the breeds SR and SF were housed in 8 slatted floor pens.

In this two years master?s thesis I examine the library?s representation of research and its influence upon the relationship between the library practice and the research practice. I also intend to find out what controls the representation and if it is possible to see changes in the representation over time. My source material has been texts published in the Swedish library journal ? and social domain ? Biblioteksbladet during the last decennium (2001?2011).

The purpose of this paper is to identify and analyze success factors in the integration of students with special needs in regular schools. This will be done through the case study of a nine year old autistic student in a small town public school ? a fairly representative case for the Swedish school system. The data collection methods used in the paper are; three participant observations of the student, and a qualitative interview with two of the student?s teachers.