This master thesis consists of the creation of shock absorber models for percussive rock drills. A model of the rock was also developed. These models were connected to existing models of the rock drill to create a complete simulation of the rock drilling process.When the models had been created the rock model was evaluated by comparison with measured values from lab tests. The verified rock model was then used to evaluate the shock absorber models.Four new shock absorber concepts have been developed. Three of these have been modelled, while the fourth have only been sketched and described.The evaluation of the models showed the following:? Simulations of the single shock absorber don?t correlate to reality very well.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

The development that the Swedish society has experienced during the last four decades and the higher part of the population coming from foreign countries calls for a more intensive research on the situation of these groups. The purpose of this study is to find explanations of the differences in the share of immigrant politicians in Linköping and Norrköping. The starting point of the study is a model of factors assumed to affect the representation of immigrants in the municipality assemblies. The immigrant composition, the municipality organization and the view of democracy of the politicians, are all assumed to affect the civic participation. The civic participation is then assumed to affect the representation of immigrants in the municipality.

Saab Aerosystems have had one dominating product, JAS 39 Gripen, and one dominating customer, FMV, for a long time. The operations management system at Aerosystems is adjusted for development of Gripen and as the business unit is trying to enter new markets with other products and customer the operations needs to be adjusted to fit the development and manufacturing of these products as well.The purpose of the master thesis has been to investigate how Aerosystems is managing requirements on operations from external customers and how to make improvements within this area. The aim has been to carry out a situation analysis to identify where improvements are possible and then produce proposals for improvements through studies of literature and other business units. The thesis also include a study of knowledge transfer within the business unit to investigate how this can be applied to improve the managing of requirement on the operations.An extensive interview study has been carried out in which interviews mainly have been conducted with employees at Aerosystems, but also at Saab Avitronics and Saab Aerostructures. The reason why these business units have been examined is because they have carried out a large number of successful businesses with external customers, which also are potential customers for Aerosystems in the future.The interviews have been analysed to identify strengths, weaknesses, opportunities and threats with the present way of working.

Prior studies have shown that earnings management can be used either to inform or to mislead investors about the future performance of a company. However, few studies have examined the impact of earnings management on forecasting return on equity (ROE). The aim of this thesis is to investigate whether the ability to forecast next year's ROE is improved when taking earnings management, measured as discretionary accruals, into account. This is examined by comparing a forecast model that takes the magnitude of discretionary accruals into consideration with a model that does not. The study is based on companies that were listed on the Stockholm Stock Exchange during 2002-2012.

The New National Elevation Model (NNH) is a new high-resolution digital elevation model (DEM) of Sweden from airborne laser scanning. It creates many new opportunities, particularly in the area of flood mapping. NNH is provided by Lantmäteriet in two formats, both in raw LIDAR (Light Detection and Ranging) data and in grid format with two meter resolution. These alternatives have advantages and disadvantages and the aim of this thesis research is to identify these. One of the focuses of the study is data storage and thus data structure analysis, resolution and storage facilities. The research questions are:Why and in what context the different NNH-products from the National Land Survey are used (DEM 2+ or point cloud)?What constraints and opportunities are created by the different options, mainly in terms of different software, resolution, and data storage?The study area is Kärsön in Ekerö municipality located in Stockholms län and has an approximate area of 25 square kilometers. The study is divided into two parts. The first objective is to identify the consequences of using different software to create DEM from pointcloud compared to the DEM2+ model. Height models with a two meter resolution are created in FME and ArcGIS. The models are then compared with the grid from Lantmäteriet, created in TerraScan. The second objective is to examine the impact of the change in resolution, both the storage aspect and both the accuracy aspect. Inverse Distance Weighted (IDW) is an interpolation method which in previous studies proved to have the best results on high resolution LIDAR data. This model was tested and compared with a model from FMEs built-in function and the model from Lantmäteriet wich are based on triangulation (also proved a good method in previous studies). The grid created in TerraScan has good properties such as accuracy.

Increasing volatility and less political intervention from the CAP in the market price of wheat is making it more difficult than in the past for Swedish farmers to determine the price at which they should sell their wheat. In the past, the Swedish farmer-owned company Lantmännen has traditionally set a guideline price for Swedish wheat every year to which farmers could adapt, but ceased doing so last year. Therefore this study sought to identify the parameters on which the price of wheat is dependent on by using a reduced form model. The perspective adopted was that of farmers. The model proved able to identify the main factors determining the annual price fluctuations in wheat, with all variables included having an impact on the wheat price, except export quantity in the previous year.

This work is about the rights of children, how students use social media and how effective teachers are using social media in their work against abusive treatment. The purpose of this work is to examine what students have rights in school, what and how students use social media and how schools and teachers are working to prevent the abuse that takes place over the internet and via mobile phones. The method used to investigate this is partly a survey of students in grades five and six at four different schools and interviews with four practicing teachers, working as a teacher in each class who made survey. My conclusion is that children have a variety of rights in school, and all schools and teachers are working on this through rules, values ??clarification and collaborative exercises. More and more younger children use out of social media, the survey shows that many of the students in grades five and six uses much social media.

In 2005 Gunhild Eriksdotter published Behind The Facades in which she analyses the ways of approaching historical buildings in archaeology. Eriksdotter emphasizes that the archaeology of buildings is in dire need of renewal videlicet the traditional outlook on buildings as two-dimensional objects need to change. She develops a method of analysing the spatial dimensions in a three-dimensional world. By fusing theories and methods in excavating archaeology and architecture, she is able to give us a new way of approaching buildings. Her method includes the analysing of a buildings material, spatiality and use.

The following is an explorative work on various forms of collaboration. The core of our exploration revolves around the idea of co-operation as a tool for examination, a collective working method, the input/output within creative practices as well as a phenomena in its own right? It is however not ?simply? about collaboration, but rather places as much focus on a highly personal search for new working methods, new approaches towards research and on the development of our relationship to graphic design. From beginning to end, the entire project has become a work whereby the term ?we? has been more important than ?me? ? a well-functioning project with a common purpose: a collaboration, between us..

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

The purpose of this study is to give a description of how six pedagogues in the third and fourth grade teaches mathematics and which working methods they use. When using the term working methods it is implied that it can for example be outdoors pedagogic, laboratory material, problem solutions et cetera. This material can both be an everyday material or a pedagogical material. The research was carried through by interviews and observations. Six pedagogues were interviewed in two different districts.

The aim is to develop a new decision-making model for credit-loans. The model will be specific for credit applicants of the OKQ8 bank, becauseit is based on data of earlier applicants of credit from the client (the bank). The final model is, in effect, functional enough to use informationabout a new applicant as input, and predict the outcome to either the good risk group or the bad risk group based on the applicant?s properties.The prediction may then lay the foundation for the decision to grant or deny credit loan.Because of the skewed distribution in the response variable, different sampling techniques are evaluated. These include oversampling with SMOTE, random undersampling and pure oversampling in the form of scalar weighting of the minority class.

At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

The development for Skanska Commercial Development (SCD) during the last years has been positive on all markets and Skanska therefore plans on expanding their activity. Central and Eastern Europe has had a considerable economic development, what is assessed to continue during the next following years. Bucharest is one possible alternative in the CEE for a new establishment by SCD. However, the investigation before an entry is a process with many factors that need to be taken into consideration. There are today no models on how and what a developer as SCD should evaluate in terms of opportunities and risks on a possible new market.