All companies wants? to be as profitable as possible. The company in question is one of the leaders in it´s field in Sweden. In order to increase profits as much as possible it is important to identify and eliminate eventual quality defect cost as far as possible.This study was performed in Huddig AB, and the purpose of this study is to try to develop a routine for monitoring the quality defect costs, and to improve communication and create feedback between production and aftermarket.In addition to an extensive literature review on quality defect costs most of the work have been conducted at the company. Own observations and interviews have been done with the staff to get a picture of the current situation and to try to come up with improvement proposals.During the study it was proved that much of the quality defect costs in essence, derived from the production, which is seen as positive because it is the easiest part of the company to improve.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

The purpose of this thesis is to find means of control that secure cost efficiency regarding the accommodation for the employees on missions abroad of the Swedish Ministry for Foreign Affairs. Today the ministry?s cost for the employees? rented housing is 100 million SEK and there is a need of improvement in the control of these costs. A work method for organizational development will be used in order to reach the findings presented in the thesis. First we study the strengths and weaknesses in today?s control system.

In the last decade the Italian authorities have tried to adapt themselves to a united European asylum system, in the European Union, through the adoption of legal reforms, intended to improve the conditions of asylum seekers in Italy. Despite these reforms, asylum seekers and refugee?s living conditions are far from covered. The aim of this study is to explore the different functions of social work in the Italian reception process regarding unaccompanied minors and their implications on the wellbeing of the unaccompanied minors. This study was conducted through several interviews with both social workers, which in some way worked with unaccompanied minors, and the unaccompanied minors themselves.

The background to this report is the author?s ambition to understand individuals? work situation, how it?s formed in interaction between the individual and factors in the work-setting. Such an ambition is well in line with the concept of Human-Technology-Organization (HTO), a cross-scientific approach that puts a system-oriented perspective on how human, technolog-ical and organizational factors interact within work systems.The aim of this report was to explore managers? work-situation and generate an understanding of it from an HTO-perspective by using an organizational model as a framework for an interview guide and to analyze the work situation from an HTO-perspective following the ques-tions at issue:1. How does the managers experience their work situation?2.

  Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

  Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.

Energy efficiency has become a very topical issue that has been discussed throughout the European Union for preventing negative environmental impacts that have been associated with the consumption of energy. In the residential sector have mainly municipalities set strict requirements for the reduction of energy consumption while the renewable energy has been asked. Different concepts of low-energy buildings have been developed to reduce the cost of operation and maintenance in existing buildings such as in new ones.This thesis has aimed to minimize the energy cost of a large building which has had low energy consumption features originally. Energy reviews has been initiated in order to be able for showing how the house electricity could be carried out even more efficiently.The work was initiated through a literature study to clearly increase the reliability on the energy subject. Different concepts of low-energy buildings have been treated in connection with its specifications, afterward those have been compared with the obtained results.

  Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

ABSTRACT. Introduction: Human Immunodeficiency Virus (HIV) is a retrovirus which occurs worldwide and spreads between humans mainly through sex, from mother to child, blood and blood products and between injecting drug users. After been infected with HIV for a couple of years the final stage of the infection progress into Acquired Immune Deficiency Syndrome (AIDS), and there is no cure or vaccine, only medication that delays the development of the disease. Objective: The aim of this thesis is to examine the preventive work against HIV in Sweden, the groups at risk for getting infected and to highlight sexual attitudes and behaviours among adolescents and young adults. Method: A literature based study method was used and the material is based on scientific articles and reports from active actors within the field of HIV prevention.

Introduction: Workplace health promotion is important for both the health of the employee and the profability of the company. Among other things the psychosocial work environment tends to be related with motivation and well-being at work. Employees who experience work motivation and job satisfaction are at less risk of illness, which may also result in reduced absenteeism. Aim: The purpose was that of a smaller pilot study examining a qualitative methodology to obtain detailed and concrete information about the blue-collar employees' views on what helps or impair the psychosocial work on the logistics company. Method: A qualitative approach where semi-structured interviews were held with four focus groups was used.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.