The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Numerical simulations play a vital role in both static and dynamic stability assessment of electric power systems and the foreseeing of voltage collapse. Simulations performed by Svenska Kraftnät(SvK) are mainly done in the specialized voltage collapse predicting software tool, SPICA and the more all?purpose software tool, ARISTO.The grid operators at SvK use SPICA to predict the maximum transfer limit at specified sections (in this report the section in concerns is the southern part of Sweden i.e. interface1 4). SPICA is mainly used as an online application by using actual states from the grid, these states update every quarter of an hour.This thesis is a continuation of the master thesis SPICA ? ARISTO JÄMFÖRELSE by Jakob Katzman and Johan Fält.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

In Sweden whenever trains or maintenance workers want access to the railway system, their requests of usage and movements are being supervised, granted and handled by train dispatchers. The profession holds a key role in making the complex railway system work in terms of efficiency, safety and delivering on-time arrivals. This master thesis, delegated by the Swedish Transport Administration, has been carried out at the Division of Human Computer Interaction at Uppsala University and at the train traffic control center in Gävle. The aim has been to map what information the train dispatchers use in order to make safety-related decisions concerning their working goals. And further to describe and analyze how the train dispatchers, visavi their tools and systems in the work domain, gather necessary information.The result indicates a complex, diverse and spread out setting of different programs, procedures and tools that make satisfactory fulfilment of efficiency, safety and punctuality in relation to the time table hard.

Östby waterworks in the community of Kramfors has since 2003 had problems of fast clogging of the slow sand filters. As the clogging appears more often, they must be cleaned more frequently which has made the drinking water preparation difficult. Wintertime it has sometimes been impossible to clean the filters which has led to their closing and this has influenced the water quality negatively.The waterworks is a surface waterworks which takes its raw water from the lake Sjöbysjön. The water is flocculated and filtered in a contact filter with the flocculent EKOFLOCK 91. Thereafter it is alkalinized before it reaches the outdoors placed slow sand filters.

The report aim to increase awareness of factors that have a major role whenremodelling an apartment building from the 1950s to offices.The thesis can be used for future projects when remodelling apartments to offices.The report can provide ideas and inspirations on how this can be done in aneffective way, ie . A way that does not require rebuilding the supporting structure,but only non bearing walls. The thesis also gives insight on the parts that will needto be supplemented from Boverket?s requirements in terms of accessibility,acoustic and fire requirements.The methods used in this thesis are literature studies, case study and sketch work.In the literature studies, the primary sources were Boverkets byggregler BBR, andArbetsmiljöverkets föreskrift AFS 2009:2 but other literature were also used. Theprimary items were chosen from the literature studies and they were furtheranalysed in the sketch work.

En hel del tidigare forskning tyder på att ha en balans mellan arbetsliv och privatliv är viktigt för att uppleva ett psykiskt välmående samt för att kunna prestera bra på arbetsplatsen. Då verkstadschefer på ett industriföretag genomgår ett stort förändringsarbete undersöktes hur fem manliga chefer upplevde sin balans mellan privatliv och arbetsliv. Delsyften med studien var att undersöka hur chefens roll i privatlivet påverkade balansen, i vilken grad stöd hemifrån påverkade balansen samt vilka konsekvenser en balans eller konflikt skulle kunna få. Studien genomfördes kvalitativt, med en semistrukturerad intervjuguide, där samtliga respondenter var påverkade av förändringsarbetet. Resultatet visade att det fanns verkstadschefer som upplevde en konflikt mellan arbetsliv och privatliv men även de som upplevde en balans.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

A common way to stabilize high rise buildings is to use an elevator core built of concrete. Today, we use to build these elevator cores of in-situ concrete. Precast concrete twin wall (double wall) is a semi-finished product that has become more common in recent years. This diploma work studies how the twin wall works out as structural elements in an elevator core. The work also shows some possible ways of designing twin walls and highlights some important parts of the design that will be vital to the stability of the building.    The result shows that it is important to think through where the element joints should be placed.

The family and relatives caring of older people in Sweden lies on an old tradition. By legislation the responsibility for the older people has gone through a development from the family to the society. According to the new social service law (2000) it is not that clear that the utmost responsibility lies on the society. According to the social service law ( 5th chapter, 10 §) the municipality should ease things up by giving support and relief for relatives taking care of older people, prolonged ill and function disabled people. The purpose with the study was to examine how the family care givers are finding their everyday work and their experience of the support that the society is giving.

This project was started within the Market-Design programme of Elforsk, with the aim of developing representative test systems of Swedish distribution networks. Using such test systems as a basis for reliability and customer interruption cost calculations makes it feasible to analyse the network tariff regulation of Swedish power  istribution companies. In particular, it enables studies of the incentives for companies to invest in system reliability. Until now, the available test systems are either not representative of Swedish conditions, or too small in scale and limited in function.Within this project we have created two test systems. In order to represent the diversity of actual Swedish distribution networks, we have created one test system for urban environments and another for rural environments.

The Swedish energy company Vattenfall is currently the owner of the district heatingsystems in Nyköping and Motala. To be able to also offer cooling solutions tocustomers are becoming more and more important. This report describes the resultsof an investigation of the cooling market in the two cities and the potential needs forcooling today and in the coming 20 years. The total potential for the coming 20 yearsis estimated to be roughly 17 MW for Nyköping and 9 MW for Motala.Two possible district cooling systems for each of the two city centers was modeledand a comparison was made between different cooling techniques namely absorptionand compressor chillers.Absorption chillers driven with district heating during the summer is one way ofincreasing the load in a combined heat and power plant and thereby the possibleelectricity generation. The cost of heat production must be low for absorption chillerto be able to compete as an alternative.

  Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy Work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.