A design methodology to mitigate timing problems due to long wire delays is proposed. The timing problems are taking care of at architecture level instead of layout level in this design method so that no change is needed when the whole design goes to backend design. Hence design iterations are avoided by using this design methodology. The proposed design method is based on STARI architecture, and a novel initialization mechanism is proposed in this paper. Low frequency global clock is used to synchronize the communication and PLLs are used to provide high frequency working clocks.

Background: First Line Managers are expected to create a health promoting work environment. Research has shown that the prerequisites for accomplishing a health promoting leadership are not always the best. Aim: The aim was to elucidate the prerequisites for a health promoting leadership as First Line Manager at a University hospital in Sweden based on competence, role, support structures and own durability. Results: First Line Managers at the chosen hospital seems to have rather good conditions for conducting a health promoting leadership. All respondents did have a university degree and most thought that their competence corresponded well with the role.

This thesis introduces Kongjian Yu?s design approach in terms of industrial heritage conservation in connection to transformation and urban design. The approach is examined respectively on two cases from China and USA. The thesis give a brief introduction to current achievement in conservation research and general profile of industrial conservation practice. Based on case and theory study, Yu?s design approach is carefully applied to an industrial area Nyhamnen in Malmö and a design proposal is produced.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

The character of a pattern carries through to the context in which it is placed. Each pattern tells a story. By interpreting our surroundingenvironments we become inspired, and the patterns in turn can become part of our own narratives. This project was fuelled by my fascination and desire to explore patterns. My method of exploration was based on prior knowledge of patterns and interior design.The question became how can I apply my knowledge of interior design to pattern design and how could I best translate the brief intoa language of colour and shapes? The aim was to develop my knowledge of pattern design as well as to use this opportunity to combine my design methods with those of a professional designer.

Tjänster är en växande marknad där bemanningsföretagen har fått en ökad betydelse bland annat beroende av marknadens höga krav på tillgänglighet och flexibilitet. I dagens samhälle är det viktigt att produkter och tjänster inte bara fyller en funktion utan också uttrycker och förmedlar rätt budskap till intressenterna. Design har därför fått en allt viktigare funktion inom företag som vill utmärka och särskilja sig. För att frambringa ett starkt och trovärdigt varumärke som differentierar sig gentemot konkurrenterna, borde skapandet av varumärket inkluderas i en designstrategi där kvaliteten på designen är väsentlig.Studien syftar till att skapa en tydligare bild om och på vilket sätt ett tjänsteföretag arbetar med designstrategi i en förändringsprocess och hur de når ut till målgruppen. Urvalet för denna studie är tjänsteföretaget Academic Work, kommunikationsbyrån Naked, som företaget har tagit hjälp av i framtagandet av det nya konceptet, och slutligen en av företagets utvalda målgrupper, studenter.

The construction industry accounted for 19 % of all work-related fatalities in Sweden between 2010 and 2013. The exam report has been done to find out what underlying causes there are to the high number of fatalities and to the occupational statistics of the construction industry. Moreover it has been reviewed what improvements can be done to reduce accidents and fatalities in the construction industry. The report consists of a survey of statistics, laws and regulations affecting the work environment and of literature concerning the subject. It has been conducted an interview and a questionnaire survey at the construction company Asplunds Bygg and an interview with an inspector from the Work Environment Authority.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

This essay investigates the knowledge about the dialect in Jönköping among youths in the same city. My aim is primarily to focus on their knowledge around words and expressions in the dialect of Jönköping. My method is both qualitative and quantitative and the survey was performed through questionnaires that were sent out to 50 students. In the questionnaires the students were asked to translate words from the dialect in Jönköping but also to freely speculate around the features in the dialect. My findings indicate that the knowledge around the students own dialect is very poor. Knowledge about the words and expressions that were used in my questionnaire were also poor but among those words that the students actually recognized many originated from the Romany language.

AbstractThe research in the interdisciplinary field of natural-human-health-design has in recent decades gainedmomentum and led to new or new-old ways of thinking and acting in terms of planning and design of outdoorenvironments with the aim of health promotion. Concrete concept models and design guides have begun toemerge as a result of this research.The purpose of this work is to use these guides to develop a design proposal for a supposed health garden,with Wij Trädgårdar in Ockelbo as a base. This has been done in the form of a process description. The targetgroup for the design proposal is long-term unemployed and people who have come to Sweden as refugees.Since the specific design recommendations could not be found for the selected target group, the main materialwas general guidelines for health gardens in combination with guidelines for health gardens directed to targetgroups with stress-related problems, which is a broad target group for which there are relatively much currentresearch.The result is a process description of the progression towards a sketch on a health garden, designed for aspecific spot on Wij Trädgårdar, but available for use in other locations, provided adjustments is made to thespecific location. The sketch is supplemented with plant suggestions to different parts of the garden.

This is a pattern project for textiles, with main purpose to develop and challenge my design process and to experiment with a mix of different printing techniques. The goal of the project was to create three textile individuals as representatives of my experiments, inspired by natural surfaces.The world of fashion have been an inspiration and has been the model for these textiles, with its powerful and playful patterns. With the world of fashion as a model, I also chose to work with the materials habotai silk and silk velvet. The qualities of these materials has also been influential in my design language.The work has been very focused on experiementation and exploration, and resulted in three printed fabrics that I have chosen to call Björkalm, Lindstam and Lavbädd..

The master thesis has been constructed together with Scania, who had a wish to develop their training for newly employed design engineers. The purpose of this thesis is to examine how a company's introduction process can be shaped, as the introduction is the key to success for the individual as well as the organization. With a focus on how the productivity among newly employees can increase and how the introduction becomes meaningful to the individuals and the organization, the objective of this work is to develop concepts applicable for an introduction.The work was conducted using qualitative interviews with several different individuals at Scania and other companies. Along with the interviews a survey was constructed and sent out to newly employed design engineers at Scania to get a view of their opinions on the present training. During the first period of a job there are several factors that affect the employee based on the result from the interviews, previous research and theories.

Background: First Line Managers are expected to create a health promoting work environment. Research has shown that the prerequisites for accomplishing a health promoting leadership are not always the best. Aim: The aim was to elucidate the prerequisites for a health promoting leadership as First Line Manager at a University hospital in Sweden based on competence, role, support structures and own durability. Results: First Line Managers at the chosen hospital seems to have rather good conditions for conducting a health promoting leadership. All respondents did have a university degree and most thought that their competence corresponded well with the role.

This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.