AbstractThis essay discusses different explanations and interpretations of what characterizes large areas containing clearance cairns (cairn fields). Results from the analyses show that there are different explanations about when and why cairn fields and clearance cairns occur. Explanations vary from introduction of the wooden ard in the early Bronze Age to the introduction of rational hay-making in the Roman Iron Age.  There is, anyway, relative agreement considering why and when cairn fields were abandoned. The reason suggested is an increasing pasturage with the consequence of reducing soil to poverty during the period of the Great Migration or in the Viking Age.The most likely cultivation system in cairn fields is a system consisting of both intensive and extensive characteristics. The latter coincides with the probable mobility of settlements.

This essay is an analysis of the objects made of bronze found in an excavation Västergarn parish, Gotland, in 2010, conducted by the University of Gotland. The studied material presented in this essay comes from contexts inside, as well as nearby the foundation of a medieval building which purpose is still not certain. The first purpose of this study is to present the bronze-objects found inside and nearby the foundation of house 6, and to see if there are any datable objects. There is also a discussion whether there has been any bronze-crafting in the area. The second purpose is to make a contextual analysis to see if there are any differences between the material found outside and inside of the building, and what conclusions can be made regarding the function and use of the building.

This Master thesis is about a postal- and telegraphic building in Eskilstuna, Sweden. The construction methods for the specific building and buildings in general from the same time are described. The purpose of the report is to describe the loads acting on the building and how it has been built and why it has been rebuilt during the years. After this, possibilities of reconstruction and adaptation for today?s demands can be evaluated.

Buildings today are built to maintain a healthy indoor environment and an efficient energy usage which is probably why damages caused by dampness has increased since the 1960?s.A study between year 2008 and 2010 showed that 26 percent of the 110 000 examined houses had damages and flaws caused by dampness that could prove to be harmful later on. This means that one out of four bathrooms risk the chance to develop damages by dampness. Approximately 2 percent of the houses had already developed water damages. It is here where the problems appear.

Italy is the third largest market in Europe with a population of almost 58 million. The country is the tenth most important market for Swedish sales. Italy has a fairly good economy at the moment and the forecast tells of an increasing strength during coming years. Despite all of this, Sweden is exporting a fairly small amount of wood to Italy. Only around 2,3 % of all Sweden?s wood export goes to Italy.

Hudiksvall Municipality will build a new preschool. The goal is that the pre-school should reflect the municipality's environmental goals and meet building regulations. The wall structures that are compared in the report is an insulated wooden frame and a frame of lightweight concrete blocks from H + HWall structures are compared within the areas of U-values, air tightness, thermal storage capacity, fire ratings, moisture, durability, emissions and environment. In these categories the two wall structures will be rated in a scale from 1 to 5 and then the categories are weighted against each other. The weighting is based on Hudiksvall Municipality's assessment of the categories importanse for their final selection.The results of the comparison show that the concrete structure is recommended for the construction of pre-school with 27.55 points against the wooden structures 23.70 points.

I samband med att intresset för att bygga högre trähus har ökat så krävs nya lösningar för att t.ex. kunna möta efterfrågan på stora öppna ytor och långa spännvidder. Träbjälklag med lång spännvidd har dock oftast svårigheter med att klara kraven på svikt och vibrationer. Ett nyutvecklat förslag på träbjälklag som förmodas klara dessa krav bättre än traditionella träbjälklag har varit utgångspunkten för detta examensarbete där syftet har varit att undersöka bjälklagets styvhet. Detta gjordes laborativt genom att bygga och testa en prototyp av det föreslagna bjälklaget och genom att en numerisk modell baserad på finita element metoden togs fram och användes för att studera hur olika parametrar påverkar bjälklagets styvhetsegenskaper.Bjälklagets design bygger på fackverksprincipen i primärriktningen och på balkverkan i sekundärriktningen.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Kisa Courthouse in the south of ?sterg?tland is a house built in the early 19th century with a typical neoclassical style. With clearly regular symmetrical wooden facade scheme with a central main entrance. The main entrance is a wooden double door with richly decorated portico. the crown moulding above the door consists of a band of dentils with a cornice moulding at the top.

This diploma work has been carried out in collaboration with the building contractor Sh Bygg Fastighetsutveckling AB in Uppsala with the intention to investigate how the height of a building affects various energy aspects such as transmission losses, infiltration, and the specific energy usage. Three different reference objects have been studied. The reference objects have been simulated for four different heights in the calculation program VIP-Energy.The results show that an increase in floor number can lead to both advantages and disadvantages. As the number of floors increases, transmission losses per square meter floor area decreases. However, as the height of the building increases, the reduction rate decreases.

Envirotainer builds containers that are specialized in transporting of temperaturesensitive products these containers are customized for airplanes. The containers arethen leased to other companies, most often to pharmaceutical companies.Envirotainer are based in Lagga, Knivsta. It is also here where the production of thecontainers is held. The container RAP T2 was designed in the early 80ies. The RAPT2 contains a fleet of about 1220 containers spread all over the world.

Judged by appearance. This is the conclusion of research made on shopper behavior that revealed that consumers tend to go by their instinct when evaluating vacuum cleaners in a purchasing situation. Many buy the first vacuum cleaner they interact with and few buy pre-planned brands. Almost none even turn the machine on before taking a purchase decision.Electrolux Floor Care Europe has their factory for vacuum cleaners in Hungary. Increased competition from China makes it harder to "only" produce vacuum cleaners with good performance.

The background to this work was to see if there was a connection between large woody debris (LWD) and the presence of brown trout in our Swedish forest streams. Previous researches by Degerman et al. (2004) have shown that there is a strong correlation between the amount of dead wood and the presence of brown trout. The goal was then to find a way to restore, maintain and increase the trout habitats by constructing and adding manmade wooden structures that would mimic natural deadwood and its features in flowing water. The inspiration was partially taken from a water restoration program in the Klamath River of northern California, USA.

This thesis explores the narrow spaces between closely built houses in the over 300-year-old wooden town center of Mariestad, Sweden, and their potential as time capsules and sources of knowledge in cultural-historical building investigations. By interpreting well-preserved carpentry work on a facade in one of these spaces, the study aims to provide an example of how these preserved spaces can serve as a source of knowledge and understanding of craftsmanship and the history of the place. The thesis also addresses the municipality of Mariestad's work with cultural heritage, as well as maps out more of these potentially interesting interstitial spaces. Old Swedish wooden towns possess a high degree of uniqueness both nationally and internationally; nevertheless, they are subjected to relatively significant threats of demolitions and substantial changes, often in the form of many smaller restorations or changes over a long period of time. The focus of the case study is a window from the 16th or 17th century and the facade's old, hand planed wooden cladding.

The goal with this examination thesis is to investigate the difference in carbon dioxide emissions between a building with a wooden versus concrete carcassing from a life cycle perspective. The huge amounts of carbon dioxide released into air from human activities must be reduced to prevent serious consequences. A way to limit this issue is through performing a comparative study where the result shows which of two products with the same function has the lowest emission of carbon dioxide, whereof the product with the lowest carbon dioxide pollution can be chosen.To be able to perform a study like this an object has been chosen and studies about life cycle analyses have been done. The rental square meter, the thermal conductivity value, the energy requirements and the placement of the building has been set equal in both framework types. There were solely dissimilarities of the two buildings taken into account when this comparison study was performed.The result of the study is that a building constructed with a wooden carcassing has the lowest amount of carbon dioxide emissions.