The study of the French market for softwood has been done in collaboration with VIDA AB. The aim of the study was to investigate important product quality and service quality dimensions, the customers? perception of the offering and generally describe the French market and present actors. The market for softwood around the world changes over time and new markets can mean opportunities for the sawmilling industry. The French market is the second biggest European market for softwood, has had presence of actors with sourcing of raw material from the Nordic countries for decades and there is a growing interest for building with wood. Theory being used is about the different dimensions that make up the total quality of softwood, together with intangible dimensions making up the total offering that helps the sawmilling industry to create positive perceived value for the customers. Methodological approach in the study was a case study research design, aimed at providing knowledge about one specific subject in one context. The general description was mostly carried out by literature studies and data from various statistics sources.

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

The moisture content in 10 deliveries of tree parts and 10 deliveries of wood residues were measured with different methods to analyze the quality of procedure used at Dåvamyran today. At the same time a survey was made on the measure procedures used at heating plants in Sweden The majority of the heating plants in Sweden use weight and moisture content as base for payment but at some plants only volume. The moisture content is usually estimated by drying wood chips in an oven but few plants a visual estimation is used. At few plants moisture content is estimated spectroscopicily. The techniques using near infra read light and other electromagnetic are still at a test stage. The methods of measurement used today are quit unreliable for the individual deliveries and there is a risk for systematic mistakes.

Saproxylic lichens in managed forests have less substrate available than in unmanaged forests due to the shortage of dead wood. However, a suitable substrate for these lichens could be dead branches on living trees. To this date, there has not been any systematically collected data about theabundance of dead branches on living trees and the lichens growing on these branches in managed forests. The aim of this study was to see where dead branches were located on living trees of Pinus sylvestris and Picea abies, how large the surface area of these branches was and what lichens grewof wood on these branches. The study was made in Finspång, Sweden, where 11 forest stands of P.sylvestris and P.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

In connection with the property crises in many countries, caused by the financial crises, people are now more aware of the risks involved in poor property-investments. The unusually cold winters along with extreme prices of electricity in Sweden in recent years has also contributed to increased interest in energy-efficient buildings.The process of developing a modern family home in Kiruna, Sweden is presented the first part of this paper. The house has been designed to withstand very high stresses from snow, low energy consumption as well as a high standard of living comfort. Aspects of the house covered here involves everything from construction, heating and ventilation to sanitation. Each of these areas is presented based on their underlying, scientific methods or theories.

Today green tree retention, together with leaving dead wood, is a common practice with the aim to reduce negative impacts on biodiversity and environment due to clear-felling. To better understand whether this conservation practice also makes a long-term difference, it is important to know what happens to these trees after harvest. Few studies have made an assessment of what happens to retention trees over a longer time period. In this study I inventoried retention trees that were left at clear-cuts six, twelve and eighteen years ago. I carried out a re-inventory of 57 retention patches (divided into free-standing tree groups, small swamp forests and edge zones) and free standing dead trees, spread over 25 previous clear-cuts in central Sweden.

The main purpose of this study is to investigate how to reduce the high, and every decade raising, pre-clearance cost. The pre-clearance is today carried out with a brush saw and paid per labour hour. All small trees not suitable for pulpwood are removed to simplify the later work of the harvester. The study compares the economic results from thinning of four parcels each treated differently regarding harsh or light pre-clearance and extraction of only pulpwood, or both pulpwood and fuel wood. In this type of spruce stand the study indicates that a lighter pre-clearance, followed up with both pulpwood and a fuel wood extraction, has a much better economy than the traditional method of hard pre-clearance and only pulpwood extraction..

This final thesis is performed on commission of Torsby forestry administration, Stora Enso Skog. Stora Enso Skog is one of the major forestry companies of Sweden. The main business area is located in and around the region of Bergslagen. During the last decade the practice of forest management has rapidly changed due to a new forest legislation. The new law has resulted in that the production goal is equal to the environmental goal within forestry.

One of the biggest challenges in the human history is to prevent environmental pollution. Everybody has an indirect or direct influence on the environment through his or her consumption. The stakeholders are not just interested in price and quality, they are also interested in the circumstances of production and how this affects the environment. By taking environmental concern in public procurement it is possible to speed up the environmental adjustment of services and products. Environmental awareness has become more and more self evident in the environmental work.

In my thesis I have sand blasted different type of woods - ring-porous and diffuseporous deciduous tree species and conifers - to show different results depending on the species, the direction of the grain and the effects of surface treatment of a blasted surface.The results of my tests were sometimes unexpected, such as that the sand from blasting almost completely disappeared, that all wood surfaces after blasting exhibited a much lighter or paler surface than before and that the diffuse-porous tree species showed differences in hardness between the beginning and end of annual rings.By creating a library of different kinds of wood and sandblasted surface treatment, I have created a reference bank that I will be able to use me in the manufacturing of interiors, furniture and other objects..

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

The need for roundwood transport capacity vary throughout the year. The need during a period is influenced mainly by the volume transported the period, the number of days during which transport can be carried out, seasonal variations in road conditions and the weight of the roundwood, and the origin of the wood (private forest owners/ forest companies). The need for transport capacity generally increase during the winter and in spring, after thawing. Lack of logging trucks combined with a lack of drivers for these trucks make it hard to hire extra help during periods of increased transport capacity needs. It is also very expensive to keep logging trucks for use only during these periods. In this thesis, two new concepts based on the partial transport by truck tractors have been examined, to find out the possibility for increased performance and flexibility.

The objective of this study was to contribute with suggestions of nature preservation managements of selected forest objects of high nature values managed by the Swedish state-owned forest company Sveaskog. Many forests with high natural potential are relatively rare today due to modern forestry, where wood production is the main purpose. Sveaskog?s policy is to consider and to priority nature conservation on valuable objects. This assessment includes objects that in the future may develop into nature reserves.