Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.

This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

Sleep is essential for all mammals and they all have different sleep patterns. Wild horses normally spend 2-8.5% of a 24-hour period in recumbent position while stabled horses lie down 11-20%. To fulfil the need of rapid eye movement (REM) sleep the horse must lie down with support against the ground for the head. The lying behavior can be affected by external stimuli such as age, food intake, bedding materials and if the horses feel safe or not. This study investigates the lying behavior of horses on different bedding materials; wood shavings and filled rubber mats (HIT SoftBed®).

Italy is the third largest market in Europe with a population of almost 58 million. The country is the tenth most important market for Swedish sales. Italy has a fairly good economy at the moment and the forecast tells of an increasing strength during coming years. Despite all of this, Sweden is exporting a fairly small amount of wood to Italy. Only around 2,3 % of all Sweden?s wood export goes to Italy.

?Boverket? the Design Regulations in Sweden, also called BKR has for a long timebeen the mandatory standard that has guided and regulated construction design. Butat the end of 2010 BKR was replaced with Eurocode. This report deals with thecomparison of these two standards when it comes to wood construction. Duringwinter 2009/2010 there were many roof collapses due to excessive loads on theroofs across Sweden.

Holmen Skog has only five out of 70 wood buyers who are women, This report is seen as a step in the process towards gender balance in the company. This is a problem that is equal over the entire forest industry in Sweden. They all think that sexual equal workplaces are very important to remain competitive, see things from different perspectives and development of the company. The survey was done by sending out questionnaires to all women who work and have worked as a wood buyer at Holmen, and as many men of both categories. These four categories became a total of twenty persons. To map the industry another questionnaire was sent out to the six largest forest companies in Sweden. The survey found that female wood buyers not finished their work earlier than men did, as they thought before.

This thesis analyses the prerequisites, profitability and competitiveness of eucalyptus plantation on the Iberian Peninsula and in Brazil. The thesis has a macro perspective and analyses a typical hectare of eucalyptus in each studied region. A survey methodology was used as a strategy to cover a broad perspective using expert respondents. The regions studied on the Iberian Peninsula were the ones found suitable for eucalyptus plantations from an economic point of view. The studied regions were Huelva in the South West of Spain, Galicia in the North West of Spain and Portugal.

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.

This report describes a new foundation method and compares it with a traditional founding of concrete. This new method is called the Koljern technique and uses cellular glass which is called Foamglas. The Foamglas is compounded to founding elements by lightweight steel beams. Foamglas is an insulation material with high compressive strength, and is rot, insect, vermin and acid proof. The cellular glass is also fire proof and watertight, which makes it a very good construction material.The report contains a study of a number of cases for which the Koljern technique is compared with a foundation of concrete.

Stronger demand has been put on forestry to show environmental considerations during harvesting. This is especially for crossings of brooks with sensitive elements and great care should be observed when they are to be crossed during harvesting by logging machines. For that reason Hultdins has constructed a portable bridge that can be used for those occasions. The bridge has been developed in accordance with wishes from SCA forest, since they have a great deal of brooks in their forests and in private forests from where they buy part of their wood supply. The aim for this report is to investigate if this portable bridge can be of interest for the forestry market. The research has been made at SCA skog in Medelpad and Norrskog in Medelpad.

Biodiversity is essential for human well-being and it is defined as the genetic variation within species and the variety of species and ecosystems. Biodiversity provides several ecosystem services which are necessary for human beings but there are different threats towards the biodiversity. The biodiversity linked to the forest in Sweden are threatened, about 50 % of the red-listed species in Sweden are associated with forests. This is linked to the commercial exploitation of the boreal forest in Sweden which started 200 years ago. The forestry the last 50 years, with clear-cuts, have contributed to a fragmented forest landscape.

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

The purpose of this bachelor degree thesis is to analyze technical issues associated with an implementation of a low sloping trash rack with narrow spacing. A hydropower plant in Umea?lven was used as a case study. The basis for the study was a model where trash racks were dimensioned for inclinations between 25 and 45 degrees. Corresponding head loss, durability and water speed through the rack were then determined for each inclination.