The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.

Fuel wood is currently the third largest assortment from the forest in Sweden after pulpwood and lumber. Branches and tops i.e. logging residues are one of the assortments of fuel wood which is a common by-product after harvesting nowadays. The way to utilize, disintegrate and transport the logging residues varies between northern and southern Sweden. Branches and tops are collected throughout the year at appropriate stands, but are consumed mainly wintertime.

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

Finnhamn is a small group of islands in the Stockholm archipelago. At Stora Jolpan, the biggest island, there is a hostel. The main building was built in 1915 and is called Utsikten. The purpose of this project is to on behalf of the Archipelago Foundation (Skärgårdsstiftelsen) find alternative systems that can replace the existing heating system of Utsikten (an oil-fired boiler and electricity heaters) to a system with renewable energy. The alternative system that this project focuses on is a system of solar collectors combined with a wood chip boiler.

A recommendation for stand treatment of lodgepole pine (Pinus contorta) is, in a scientific point of view, lacking when it comes to harvesting for biomass energy. Within the next decades it is expected that 280 000 hectares of lodgepole pine will have reached thinning age on the domains of Svenska Cellulosa Aktiebolaget (SCA). Due to this the interest has grown rapidly for studying the possibilities of harvesting biofuel assortments already in the first thinning. In this study the distribution of the biomass within lodgepole pine trees has been studied and taken into account for estimating the proportions of harvested assortments when using different methods of thinning. The methods studied were conventional biofuel-harvesting (with delimbed branches gathered separately from the round wood) and thinning with cutting of round wood and long tops (incl.

The biodiversity of the Swedish forest has degenerated since the beginning of the 19th century when fire suppression and large scale logging first occurred. Together with a changed land use, these actions today have had a negative influence on many forest dwelling species, due to gradual reduction of natural processes, successions and different structures from the forest ecosystem. The Swedish Forest Act, together with different environment certifications, have today encouraged private persons and forest companies, among them Holmen Skog, to work actively to improve nature conservation. The aim of this study was to, by field inventories of already existing nature values, literature studies, recommendations from scientific reports and ecological gap analysis as a basis, make a management plan, for a non-production area, to conserve or improve the prerequisites for biodiversity. ?Storskogsberget? is located in the coastal area of Västerbotten County, 35 km from the city of Umeå.

It is essential to reuse- and recycles residues to decrease the amount of deposit materials and reach sustainable energy use. Two ways to work towards this is to recycle wood ashes to the forest as nutrient compensation and extract biogas from combustion of biomass.The aim with this study was to decide whether wood ashes that been used for biogas upgrading with accelerated carbonation also can be used as a nutrient compensation in the woods according to recommendations from the Swedish Forest Agency (Skogsstyrelsen).The ashes that were used in this study came from Johan Andersson who works at JTI in Uppsala, who also treated the ashes with biogas. The ashes have, in both untreated and treated condition, been analyzed in this study according to contents of elements, leaching properties, hardening properties and contents of crystalline phases, to evaluate what impact carbonation with biogas has on the ashes.The accelerated carbonation led to hardening of the ash, and decreased amount of CaO- and increased amount of CaCO3. The CO2-uptake also entails a dilution of the elements, and the content of nutrients and trace elements decreases. However the results show an indication of an uptake of S from the biogas to the ash, since the dilution had a smaller impact on S than the rest of the elements.

The increasing oil prices during the last years have made it profitable to use cereal grains as a fuel. When compared with wood, cereals contain higher amounts of Cl, S and ash. The Cl and S content makes the gases from cereal combustion more corrosive than gases from wood combustion. The goal of this master thesis was to find out the variation of Cl, S and ash content for oat grain grown under different conditions. Oats was chosen because in Sweden it's considered as the cereal with the best fuel qualities.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

The Sitting while waiting for sustainability project goal was to make a functional model for a resting chair and to make it by using furniture and artefacts as material. A try of understanding the process of re-design and to use it to design was driving the project through. The result was a prototype made out of a bed frame and 18 pair of jeans and with details made out of leather..

The last century, forest fires have decreased in frequency due to efficient fire-suppression along with the growth of the industrial forestry. Since 1990, fire has been reintroduced under controlled forms to recreate burnt habitats. Many species that are dependent on, or benefits from, forest fires have increased since fire was reintroduced. The importance of connectivity is often addressed in ecological research. This is particularly important for species dependent on short-lived habitats such as burnt forests.

This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future timber harvesting.