The aim with this study was to investigate mortality in older respectively younger beech stands (Fagus sylvatica), the different types of dead wood in the forest and the availability of coarse woody debris (CWD). The research was carried out in previously managed and seminatural stands in Biskopstorp and Frodeparken, located north of Halinstad in Halland,Sweden. Data were collected from 22 stands with at least 50 % beech and with a minimum age of 5 1 years, ranging in size from 0,67 to 19,9 ha. A transect was placed in each stand, in which the diaineter on both dead and living trees with a minimum diameter of 50 mm was recorded. On seven to 13 dead trees, depending on the size of each stand, decomposition stage, primary and secondary cause of death, amount of fungi and the type of the dead wood was noted.

AHA is a Swedish abbreviation of "reveal threatened park and avenue trees" and is a method to assess the conservation value of individual trees, mainly in the park environments but also in natural stands. This method has previously only been practiced in southern Sweden (Sörensson 2008). To see if this method could provide satisfactory results in northern Sweden, I have studied it in areas around the Umeå River. This was done by studying the relationship between trees with different classifications of conservation value (as classed by the AHA method) and their content of species (species richness and abundance). Insects were collected using trunk window traps in a period of 13 weeks during the summer of 2014.

The objective of this thesis was to investigate what influence nature conservation measures taken at regeneration felling. Factors analysed were the forest owners´ situation and their characters, and information activities from wood-suppliers and the Regional Forest Board (RFB). The inventory was performed with a posted questionnaire followed up by telephone to forest owners and a posted questionnaire to wood-buyers. The forest owners were grouped in three strata, depending on the quality results (D- polytax inventory) of the taken forest conservation measures, and for this investigation forest owners were sampled from the population in the tree groups. In total 73 % (41/56) of the sampled forest owners answered the questionnaire Group A (17 answers): Good judgement Group B (19 answers): Bad judgement Group C (5 answers): This group was formed from the forest owners that were informed, by RFB, about nature conservation measures and culture history consideration before the regeneration cutting.

Nature conservation on certified small private forest owners- a comparison between the two certification systems FSC and PEFC in southern Sweden Today two different certification systems are used in Sweden to certify forest, FSC (Forest Stewardship Council) and PEFC (Pan European Forest Certification). During the last years certification of forests in general and different certification systems have frequently been debated. FSC is a globally widespread system and about 10 million ha out of 23 million ha Swedish forest is FSC-certified. The FSC-standard is mainly used by major forest companies and to some extent also by smaller private forest owners. PEFC is a European system and about 2 million ha Swedish forests is PEFC-certified today.

I have chosen in this work to examine which factors are affecting the artificially creation of a tree cavity containing decomposed wood. The purpose of the work is to find out which factors are affecting the most when a tree cavity is created, and to apply these results when you artificially try to create a tree cavity. The need to create tree cavities comes from the situation where many tree cavity living beetles finds themselves today. When existing trees are to pass out there will be no suitable inheritors yet. The work was initially to focus on cavities created from cut branches.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

Norske Skog Jämtland AB is like many other companies in a situation where it has to increase its purchases to provide its industries with raw material. To increase the available amount of raw materials, many companies employ purchasers to cover larger areas. This study aims to find out how to handle the increasing competition for timber suppliers. An important input for defining such a strategy is to examine how the suppliers view their relation to the company today. For a company it is extremely important to have a good relation with the suppliers to secure long term supplies.

Moisture damage in buildings is a serious issue that leads to problematic consequences and high economic costs. Despite the knowledge and awareness existing about moisture problems, extensive damager still occurs today. Studies of moisture in the exterior wall constructions shows that the issue if often caused by rain and water intrusion. These kinds of problem result in major costs usually because the companies have to replace the material and structural components and also in some cases tear down large parts of the buildings.The work includes moisture theory and descriptions of four different exterior wall constructions, wood stud wall with plastered facade, exterior wall with wood facade, exterior wall with concrete, and exterior wall with brick facade. Our thesis work describes how the constructions are affected and moisture damage due to water intrusion.

Södra Skog chose in 2011 to convert the saw mill in Traryd to a gradually refined sawmill of hardwood. In 2009, they had also acquired the hardwood sawmill in Djursdala. This was strategically important for Södra's business since the demand for hardwood products has increased. The standing volume of deciduous trees in Sweden is today approximately 524 million m3sk and it has increased rapidly in recent years. However, the deciduous forests are to a large extent located in areas that are set aside for nature conservation and is thus not available to the industry.The goal of this work is to create a simple and reliable method for mapping of deciduous wood volumes in areas where Södra Skog is operating (Götaland excluding Gotland).The material that is used is raster databases with estimated forest attributes (kNN-Sweden), data from National Forest Inventory (NFI) and forest management plans.

Uppsats för avläggande av filosofie masterexamen i kulturvård, 30 hp.

Today?s forest managers implement a large number of methods to increase the amount of dead wood in Swedish forests. They use everything from high cutting of trees to girdling trees and burning forests. However, implementation of these measures without proper knowledge of their consequences is a common problem. This study has been performed to increase knowledge about two of these measures, girdling and high cutting, and how these actions affect the number of wood-living insects living on dead trees.

Laser scanning is a method of surveying that has evolved rapidly in recentyears. The technique is based on a laser scanner set up, which can document a structureusing pulsed laser beams. Each time the laser hits a surface it is partly reflectedback to the scanner that stores the point. By using strategically placed targets, storedpoints from different scans can be merged into a point cloud. A point cloud is avisualization of the scanned object with a very high accuracy.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorsprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2013:12.

Det här kandidatarbetet undersöker hur Physically based rendering kan påverkar en 3D-grafikers arbete. Målet är att skapa förståelse kring physically based rendering och hur denna tekniken kan komma att påverkar en 3D-grafikers arbete. För att undersöka problemområdet skapades en virtuell miljö i 3D med hjälp av physically based rendering. Arbetsupplevelsen jämfördes senare med det tidigare arbetssättet. Undersökningen beskriver tidigare arbetsätt och hur arbetet har ändrats med physically based rendering.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.