Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

Academic research concerning how to determine the power situation in a supply chain where an investment product supplier is involved did not exist. Therefore new models has been developed that analyses the power relations and maps out the power situation in a supply chain. In the future these models can be applied on similar cases by modifying the included parameters. The new models show that case company FAS should focus on the big producers of garbage bag which are Trioplast, Rullpack and Miljösäck. By strengthen the brand FAS can make more money in these relations.

Biodiversity is essential for human well-being and it is defined as the genetic variation within species and the variety of species and ecosystems. Biodiversity provides several ecosystem services which are necessary for human beings but there are different threats towards the biodiversity. The biodiversity linked to the forest in Sweden are threatened, about 50 % of the red-listed species in Sweden are associated with forests. This is linked to the commercial exploitation of the boreal forest in Sweden which started 200 years ago. The forestry the last 50 years, with clear-cuts, have contributed to a fragmented forest landscape.

Supply chain management är ett område som på senare tid erhållit allt mer uppmärksamhet genom en hårdnande konkurrenssituation mellan företagen. Genom att arbeta med supply chain management och integration av de informationssystem som aktörerna i en försörjningskejda använder erhåller företagen konkurrensfördelar. Informationen som aktörerna har behov av blir därav mycket viktig för att uppnå dessa konkurrensfördelar. Även datakvaliteten blir i detta sammanhang en avgörande faktor. När det gäller supply chain management och informationsbehov är de författare som studerats alla överens om att informationen och datakvaliteten är av avgörande betydelse för att kunna exempelvis skapa prognoser för att hantera brister i informationsflödet, i litteraturen benämns dessa brister som osäkerhet.

Background:Companies of today commonly search to gain competitive advantages throughout different forms of co-operation, one of which is referred to as Supply Chain Management. Although little research has been assigned to the topic of how to manage and control this type of relation, lately a growing number of academics has been arguing that ABC is an appropriate mean of controlling this type of relationships.Purpose:The purpose of this thesis is to investigate to what degree the ongoing debate on the use of ABC as a mean of control within SCM correspond to the present theories related to ABC and SCM respectively.Research method:The thesis takes it?s starting point within the literature, meaning that the empirical information consists of published articles in the ongoing debate. This information is put in relation to the original theories concerning both topics.Conclusions:The results shown in the thesis in some content agrees with the ongoing debate referring to the positive aspects that could result from using ABC as a mean of control within SCM. However the main result of the study is the discovery of a lack of discussion concerning the problems that implementing ABC within SCM might implicate, a fact that we believe contributes to the mainly positive view on using ABC within Supply Chain Management..

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

This thesis is about pricing of ice hockey tickets in Swedish ice hockey. Ice hockey is a large sport in Sweden, with clubs that more and more are acting like companies. These clubs tend to build new arenas that in many ways change basic variables.The thesis is an analytic thesis based on information about the clubs and interviews. The purpose is to study the basic variables for pricing of tickets in Swedish ice hockey. Furthermore the pricing itself and its connection to the new arenas are studied.The focus of the thesis is on the three clubs HV 71, Färjestads BK and Linköpings HC.

For a long time the Swedish forests were used by the landowner?s mainly for providing wood to the household itself. The wood was not, to a greater extent, considered a product to be sold. During the 1800s the industrial era led to a demanding need for wood in the industry and thus the use of forest, forest production kicked off. The forest production was not regulated by law, which led to a differentiated forest production over the whole country without consideration of re-growth.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

Environmental destruction is a growing problem in our world. Almost every day there are new reports concerning that we have to do something about the greenhouse gasses. Simultaneously is the human constantly more eager to have a life with higher standards and therefore uses more energy. The environment is a question that is highly up-to-date and more people try to find solutions on how to save our planet. One way to decrease the energy demand is to build passive houses, where the houses don?t have any active heating.

The aim of this thesis is to define digital library, and to investigate a relation between the construction of a digital library and user needs. The main questions to be answered are: 1 What criteria was used when constructing a digital library, particularly concerning issues like purpose, function, design, supply, services, resources and future development of the digital library? 2 How do the digital library system designers and system builders criteria correspond with those of postgraduate researchers? And what factors affect the use? A digital library is an enterprise that gives access to information stored digitally and directly available on the net. The crucial is that the enterprise has a control over collection of information and responsibility to make it available to a defined group of users. In order to investigate the relation between the construction of the digital library and user needs, I have interviewed five key people involved with the work with the digital library and twenty postgraduate researchers from the Gothenburg University.

The reduction of coarse, dead wood is considered to be the biggest threat to flora and faunain boreal forests. Extensive harvest of logging residues would increase this reduction evenmore. However, the role of dead wood created at final felling for boreal, epixylic species isstill largely unclear. It is therefore of interest to examine whether epixylic species inhabit thedead wood in young, boreal stands, especially species considered to be confined to forests inlate successional stages.The aim of this study was to investigate whether forest-interior species in fact can inhabitearly-successional forests arisen after logging. The study was conducted in young standsbordering dead wood rich woodland key habitats.

Archaeological findings show that ski manufacturing goes back thousands of years in the Nordic region. There is a wealth of literature and film that deals with the subject, but it can be difficult to get an overall picture of how a specific type of traditional ski has been made. The starting point is the documentary "Skidmakaren i Gielas", where the viewer can follow Alfred Israelsson as he makes a pair of skis out of birch wood. However, the documentary lacks important information about how the skis are actually manufactured. Length, width and certain working steps are disclosed.