Sök:

Sökresultat:

3459 Uppsatser om Wood products industry - Sida 17 av 231

Omfattningen av icke avverkade områdeni samband med slutavverkning :

This final thesis is performed on commission of Torsby forestry administration, Stora Enso Skog. Stora Enso Skog is one of the major forestry companies of Sweden. The main business area is located in and around the region of Bergslagen. During the last decade the practice of forest management has rapidly changed due to a new forest legislation. The new law has resulted in that the production goal is equal to the environmental goal within forestry.

Hur ofta bör småhus sotas? : En samhällsekonomisk analys av ändrade sotningsfrister

Sweden recently changed the national regulation of chimney sweeping. This study has two purposes. The first purpose is to evaluate the effect of this reform to see if the new regulation has led to an effect in terms of increased chimney fires in single-family houses and for the wood-burning and oil-burning stoves, respectively. The second purpose is an updating of a previous study (Mattsson 1994) of analysis of society´s benefits and costs of different alternative sweeping frequencies for wood-burning and oil-burning stoves. This study also has a secondary purpose to examine the extent to which the local sweeping rules vary with climate conditions.  Mattsson, based on his results, proposed that the sweeping requirements for oil-burning stoves should be reduced from twice a year to once every second year and for wood-burning stoves the sweeping should be reduced from four times to once each year.

Den Bortglömda Kanalen

The matter of CSR and sustainable products has gained an increased amount of interest in recent years as "green products" are becoming a trend with more "eco"-alternatives in the assortment of many retailers. However, among the increasing number of socially oriented customers, it seems that although they claim an increased demand for these kind of products, its easier to "talk the talk" that to actually "walk the walk". This is due to a discrepancy between attitude and behavior, called the attitude-behavior gap. The purpose of this paper is to examine how to overcome this gap by using three different studies to get a nuanced and reality-based view of the problem. The focus within these different studies is on the potential effects inside the store and how information provided has an effect on perceived credibility and purchase intention.

Marknadsundersökning av färdigkapade produkter

An increased demand for processed goods on the property market has contributed toinvestments within the Swedish sawmill industry. The purpose with this study is to make amarket investigation of pre cut lengths within a defined geographic area. The constituent forthis investigation is HAL (AB Hilmer Andersson) who invests in a new plane facility and twofinger jointing machines in affiliation to their sawmill in Lässerud, the vest part of Värmland.To investigate the demand of pre cut lengths and identifies the value creating factors and costfactors which the customer within the segments industry and property market perceive, havedifferent customer value theories been used. Theories of customer value and the theory aboutoffering has been the source of creating the qualitative interview with a selection of currentand new potential customers for HAL.The result of the study first gives an introduction of HAL?s new offering and a description ofHAL?s current customers, which gives the reader an understanding of why searching for newcustomers is made in the defined area.

Blästring av trä : Ett materialbibliotek av blästrade och ytbehandladeträytor

In my thesis I have sand blasted different type of woods - ring-porous and diffuseporous deciduous tree species and conifers - to show different results depending on the species, the direction of the grain and the effects of surface treatment of a blasted surface.The results of my tests were sometimes unexpected, such as that the sand from blasting almost completely disappeared, that all wood surfaces after blasting exhibited a much lighter or paler surface than before and that the diffuse-porous tree species showed differences in hardness between the beginning and end of annual rings.By creating a library of different kinds of wood and sandblasted surface treatment, I have created a reference bank that I will be able to use me in the manufacturing of interiors, furniture and other objects..

Betydelsefulla faktorer som bör ingå i en marknadsföringsmix för modeprodukter till barn

In a society where children are getting a bigger influence over the family?s consumption and where more products for children are purchased, the market for children products has expanded. This growth is due to a higher amount of older parents which have a god economy and are choosing to spend more money on products for their children. Also the fact that parents use fashion products for children as a way to reflect their own status and that children are becoming more fashionable and aware of trends have contributed to the markets expansion. All together this leads to a grown importance of knowledge for marketers concerning the market.

Kv. Tvättstugan, ett flerbostadshus med massiv trästomme : Ett examensarbete om akustik- och brandkrav samt en jämförelse av energi- och fuktaspekter

Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.

Hemautomation : Spara energi genom att automatisera hemmet

In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.

Sällskapet örtagårdens vänners trädgård i Vadstena : aktuellt växtinnehåll i historisk belysning och med sikt framåt.

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

Productivity of integrated harvesting of pulpwood and energy wood in first commercial thinnings

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

Livsmedelstillsatser i Fazer Food Services inköpsprodukter : kartläggning och analys

This thesis was performed as assignment from Fazer Food Services. The aim was to survey which food additives that were present in the products in the quotation list of one of their suppliers to the Education and Nursing segment. The aim also was to perform a theoretical analysis of these food additives and to make recommendations which food additives are acceptable and which should be excluded from the products in the future. The recommendations are not published in this report, for more information Fazer Food Services can be contacted. Food additives which have already been approved are regarded as safe according to the safety evaluation methods available at the time of approval.

Analys av Nedbrytningsprodukter av Polymerer för Bitumenändamål

This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

Mötesanläggningarnas framgångsfaktorer : En fallstudie av Stockholmsmässan och Stockholm Waterfront Congress Centre

The aim of this essay is to examine how important marketing and networking is for the meeting industry in Stockholm. The meeting industry is one of the most profitable areas of the tourism industry today and a major contributor to economic growth in Sweden. The meeting industry has grown rapidly in Sweden and Stockholm has during the last five years been one of the ten most popular congress cities in the world. This has resulted in that the city has become a strong competitor to other European cities.Stockholm International fairs are for example the largest trade fair organizer in Scandinavia and Stockholm Waterfront Congress Centre is the new arena of opportunity.However the marketing and a broad network is necessary for meeting facilities if their aim is to be successful. Marketing contributes to the meeting facilities establishment and makes it well known for the potential market, while the collaborations and relationships is important for facilitating their work.

Avvägning mellan ordersärkostnad och lagerhållningskostnad i processindustrin

Lean Production is used by many manufacturing companies. Companies in process industries do not use Lean Production to the same extent today. This is part of the report's issue to explore how Lean Production can be applied to a company in the process industries.The investigated company is a processing company that manufactures various types of foil. The company wishes to streamline its production and has therefore asked the authors to examine if Lean Production can offer the company improvements in their production. Lean Production value stream mapping tool has been selected to identify and analyze the current state of two of its products in production.

Relevanta, unika och alldeles lagom gröna

The business world has been through an extreme transformation over the past decades, which have forced companies to look at themselves from a new point of view. Consumers have a complete new set of ways to gather information and are more motivated than ever to make sustainable consumption choices. This change of attitudes among consumers has made companies focus on other things than price versus quality. A whole new concept has been brought up to questioning: environmentalism. Consumers demand more organically produced products.

<- Föregående sida 17 Nästa sida ->