This report is a joint venture with SCA Skog AB in the Jämtland forest management area. The company is a major player in the timber market in northern Sweden, and also a large business globally with offices in over 100 countries. The purpose of the study was to find out how timber suppliers want feedback/follow-up after completion of timber business. To determine this, a questionnaire survey was sent out to 75 landowners who supplied the wood for the company during the past year. The questionnaire consisted of a total of 15 questions with the opportunity to comment on certain issues.

The report is a project in cooperation with the Swedish toy company Playsam. The assignment was to design a new toy to their range of products, a pull along toy in shape of a snail with a mechanical function. The research phase contains studies and analysis of the company, its identity, product range and its customers. The research phase includes all the information needed to complete the project. A number of concepts were presented for evaluation by the company.

In recent years, moisture damages have been noticed in rendered, undrained stud walls. The design is built on the principle one-stage tightening which means that there is no air gap in the construction. The damages have occurred when water has permeated through the rendering in leaking connections and fittings for windows, doors, canopies, balconies, terraces and awnings. Behind the plaster carrier, which consists of either polystyrene or rigid mineral wool, plasterboard has often been used as a wind protection barrier. In many cases the wind protection barrier and the underlying wooden studs have been exposed to mould and in some cases even rot.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.

Logosol is a company that produce small-scale wood processing products. To be able to expand the business Logosol have decided to increase exports, their target markets are the US, Russia, Germany and Norway. The expansion has mainly been through subsidiaries situated on the abroad markets. The subsidiaries have done poor results and that has influenced the whole company. CEO Bengt-Olov Byström made a decision to sell out the units to the people who worked in the business.

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

"Ekskolan" is a monumental school placed in the middle of the new town area "Mariehäll" in Stockholm, Sweden. 600 pupils between preeschool until year 5 will use the school and its big schoolyard between the townsquare and the public park.The school will be built in massiv wood, both for human reasons with a environment of good, healthy and suitable material for the people and the school activity.The school is seperated in 3 volymes that organises different years; house B and C, and the common facilities: house A. The scool has a cultural profile with rooms for creative activites, documentation and exhibition.To mark the border to the public places that surround the scool and to meet the inclined topography, the schoolhouses will stand on a terrace. The terrace creates rooms between the houses that can be used to utdoor teaching. Likewise, the terrace creates a opened sightline between the public rooms and all the way down to the river..

The purpose of this thesis has been to determine experimentally how good a peltierelement is to convert waste heat from wood burning. Three different peltier elementswere used in a comparison study. The comparison was mainly done to know howmuch power could be obtained from each element. Even, a circuit with a step-upfunction has been created to give a higher output voltage than the peltier elementitself. The result of the experiments was a low output power, the highest valuereached 2.18W.

Utvecklingen av förbandsmetoder är viktigt för att utveckla konstruktionslösningar. Under det senaste decenniet har forskning på limmade förband utförts, främst på inlimning av stålstag och plattstål i limträ. Förhoppningen är att spänningen ska fördelas jämnare i förbandet och att brott ska kunna undvikas. Hypotetiskt sett skulle det kunna göra knutpunker utan synliga förband möjliga vilket även skulle gynna arkitekternas önskemål.Genom en sammanställning av tidigare forskning dras en jämförelse mellan testresultaten och en antagen knutpunkt som belastas av egentyngder och variabla laster. På så sätt kan limmets kapacitet konkretiseras.

This report concerns the for Sweden foreign tree species hybrid larch, hybrid aspen and poplar, and focuses on the area Kalmar and Mönsterås municipalities. The report shows that there are not only advantages with these species. The larch, the most common of the alien tree species has the greatest problems due to that its timber is difficult to sell in the area but also the Larch´s poor pulp quality and is more likely to be damaged by wildlife than the spruce is. Hybrid Aspen is much easier to sell and is used like regular aspen for match wood and textile pulp. Its disadvantage is the high cost for plants and to prevent damage from wildlife.

Tall (Pinus sylvestris L.) är ett av Sveriges viktigaste trädslag. Med ökad efterfrågan på vedråvara samt ökade krav på naturavsättningar är det viktigt att öka produktionen i skogen. Röjning och tidig gödsling ger ökad volymproduktion men kan ge icke önskvärd påverkan på vedegenskaper som ökad mikrofibrillvinkel (MFV). MFV är vinkeln mellan mikrofibrillerna i cellväggens S2-lager och cellens längdaxel och påverkas av ståndort samt konkurrensen om ljus och näringsämnen. Höga MFV resulterar i sämre kvalitet på papper och sågade trävaror.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

Today a lot of goods is transported on wood pallets because it?s practical and enabels a fast way to load cargo. The drawbacks with pallets are that they weight a lot, are big and are relatively expensive. Therefore IKEA has developed plastic lists that can replace the europallet in some applications. In this examwork an automatic handling equipment for plastic lists are design from a requirement specification to a finished machine.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..