The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

The global biodiversity loss is mainly due to human activities such as an intensification of forestry. Boreal forest ecosystems in Fennoscandia are characterized by disturbances such as forest fires, storms and floods. However, industrial forestry practices suppress forest fires and change the landscape, leading to a loss of habitats and associated species. Particularly lichen species with slow adaptation abilities and a strong substrate specificity face an extinction debt in boreal forests since their substrates are long-lived but no longer created. In this study the species-substrate relationship of two red-listed forest-fire dependent lichen species Carbon-icola anthracophila and C.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

Prescribed burning was commonly used for site preparation in Sweden to establish new forests until the 1960?s, when mechanical scarification was introduced. During recent decades the interest in prescribed burnings has increased again, mainly due to certifications of forestry stating that 5% of the regeneration areas should be burned on dry and mesic soils. The objective of the study was to evaluate actual influence of prescribed burning compared to other site preparation on stand stem density, growth parameters and tree damages for Scots pine (Pinus sylvestris L.) after direct seeding and planting. The study also attempts to simulate growth until first thinning.

Biodiversity is essential for human well-being and it is defined as the genetic variation within species and the variety of species and ecosystems. Biodiversity provides several ecosystem services which are necessary for human beings but there are different threats towards the biodiversity. The biodiversity linked to the forest in Sweden are threatened, about 50 % of the red-listed species in Sweden are associated with forests. This is linked to the commercial exploitation of the boreal forest in Sweden which started 200 years ago. The forestry the last 50 years, with clear-cuts, have contributed to a fragmented forest landscape.

Vida Skog is supplying the whole Vida Ltd?s mills with wood raw material. This study aims to evaluate Vida Skog?s contractors and the relatively new contractorportal and to identify measures that are important for the contractors? skills. The purpose with the portal is to facilitate co-operation between contractors and buyers by streamlining the logistics of the whole wood supply process.The study was conducted in the form of a questionnaire.Most of the respondents were positive to the portal.

This study has investigated what makes a business relation satisfactory. The purpose is to distinguish the factors that are relevant to a functioning cooperation relationship between sawmills and DIY-stores. The theoretical framework is primarily based on long-term business relationships. The study is based on two case companies and their relations with wood-suppliers. - Case company 1 is a relatively new established and still growing company.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

Fragmentation and reduction of forest area is a threat for many forest species and their habitat. Deficiencies in forest quality, such as lack of dead wood and old trees, are one explanation of the threat. The most important action to prevent the continued loss of forest types is to protect forest, but also to restore and to create areas that not previously had high nature values. Hence one of the key strategic roles for Fritid- och Naturkontoret, Uppsala municipality, is to monitor biodiversity in the context of urban planning. The majority of the Uppsala municipality residents live in urban areas and most of them spend some of their spare time in natural areas in cities and their immediate surroundings. Exploitation in and around Uppsala is high, but it is important that there is enough nature close to houses to meet the residents? needs of recreation.

The purpose of this report was to investigate to which extent local presence of large herbivore mammals (Alces alces, Cervus elaphus, Capreolus capreolus, Dama dama and Sus scrofa) covaries with small rodents (Myodes glaerolus, Apodemus flavicollis and Apodemus sylvaticus? The hypothesis was that high abundance of wild ungulates would inhibit the density of small forest rodents. The data was collected during field work within FoMA (Environmental Monitoring Assessment)/SLU (Swedish University of Agricultural Science). The Ungulate dropping inventory and rodent trappings, which is the base in this report, where performed 2012 ? 2014 in Gnesta/Nyköping municipalities (G/N) with a relatively high density of wild ungulates and Vetlanda/Växjö municipalities (V/V) with relatively lower wild ungulate density.

For a long time the Swedish forests were used by the landowner?s mainly for providing wood to the household itself. The wood was not, to a greater extent, considered a product to be sold. During the 1800s the industrial era led to a demanding need for wood in the industry and thus the use of forest, forest production kicked off. The forest production was not regulated by law, which led to a differentiated forest production over the whole country without consideration of re-growth.

Wheat yield depends on the number of ears per m2, the number of kernels per ear and the kernel weight. By knowing the ability of different cultivars to compensate for the different yield components and knowing which yield component that is the most important for the final yield, the farmer can match the cultivar and management to the location. The objective of the study was to investigate how the yield components of winter wheat vary depending on genotype, environment, sowing density and date of sowing.Seven varieties were grown in four locations in Sweden with three different sowing densities and with an early and a late sowing date. On each experimental site, the surviving plants after winter were counted, as well as the number of shoots at early and late spring and the number of ears. Ten ears from each site were cut at three different occasions, starting from the time of blooming, with 200 day degrees between each cut.

The study of the French market for softwood has been done in collaboration with VIDA AB. The aim of the study was to investigate important product quality and service quality dimensions, the customers? perception of the offering and generally describe the French market and present actors. The market for softwood around the world changes over time and new markets can mean opportunities for the sawmilling industry. The French market is the second biggest European market for softwood, has had presence of actors with sourcing of raw material from the Nordic countries for decades and there is a growing interest for building with wood. Theory being used is about the different dimensions that make up the total quality of softwood, together with intangible dimensions making up the total offering that helps the sawmilling industry to create positive perceived value for the customers. Methodological approach in the study was a case study research design, aimed at providing knowledge about one specific subject in one context. The general description was mostly carried out by literature studies and data from various statistics sources.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

Low stumps represent on their own up to 80% of the dead wood remaining on clear cuts and therefore supply suitable habitat for saproxylic insects i.e. insects depending on dead wood for their survival. Recent stump harvesting activities threaten this substrate of ecological importance and increase the anthropogenic negative impacts on these species. Because of technical and environmental reasons (nutrient leakage, erosion) guidelines for stump harvesting recommend to retain stumps standing in wet parts of clear cuts. However, stumps in wet positions might not be a satisfactory substrate for saproxylic insects and therefore might not be as much used as stumps in dry positions.