This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

Environmental destruction is a growing problem in our world. Almost every day there are new reports concerning that we have to do something about the greenhouse gasses. Simultaneously is the human constantly more eager to have a life with higher standards and therefore uses more energy. The environment is a question that is highly up-to-date and more people try to find solutions on how to save our planet. One way to decrease the energy demand is to build passive houses, where the houses don?t have any active heating.

The reduction of coarse, dead wood is considered to be the biggest threat to flora and faunain boreal forests. Extensive harvest of logging residues would increase this reduction evenmore. However, the role of dead wood created at final felling for boreal, epixylic species isstill largely unclear. It is therefore of interest to examine whether epixylic species inhabit thedead wood in young, boreal stands, especially species considered to be confined to forests inlate successional stages.The aim of this study was to investigate whether forest-interior species in fact can inhabitearly-successional forests arisen after logging. The study was conducted in young standsbordering dead wood rich woodland key habitats.

Archaeological findings show that ski manufacturing goes back thousands of years in the Nordic region. There is a wealth of literature and film that deals with the subject, but it can be difficult to get an overall picture of how a specific type of traditional ski has been made. The starting point is the documentary "Skidmakaren i Gielas", where the viewer can follow Alfred Israelsson as he makes a pair of skis out of birch wood. However, the documentary lacks important information about how the skis are actually manufactured. Length, width and certain working steps are disclosed.

The Department of Forest Products and Management, Swedish University of Agricultural Sciences has received means from Vinnova for a preliminary study of the organisation of logging work of today and how a better logging organisation should be brought about. This thesis reports results from qualitative interviews with nine forest machine contractors regarding the situation of their companies. The interviews have been analysed with respect to the genesis of the companies, which tasks they perform or that they could consider perform-ing, business relationships of the companies, relationships between the different partners of the companies, and the state of competition experienced by the contractors. The companies have developed either from the contractor previously being machine operator employee or from that the contractor in making has owned a machine and needed work. Their primary business is mechanised logging.

Sweden's aging population makes the need for a viable health care urgent and telemedicine can be a solution to enable older people to receive or give themselves care in their homes. Furthermore, implementation of telemedicine has the potential to realise profits in society by increasing the accessibility of health care and minimizing travel costs. Sweden?s low population density and geographical configuration makes the advantages of telemedicine even more appealing. To illustrate the differences between the county councils? use of telemedicine and thus increasing the possibility for coordinated care between them, the authors have on behalf of the Innovation Centre at the Karolinska University hospital mapped the amount of telemedicine technologies that are available in the Swedish county councils? today. To collect information an electronic survey and video or telephone interviews were used.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

Heartwood has always been a desirable part of the tree, due to it?s superior decay qualities com-pared to the sapwood. How the formation of heartwood works has been known for a long time, but which factors that initiates and stimulates the production are poorly understood. This case study presents the results of a study in which silvicultural treatments and site properties had a key position as factors to the formation of heartwood. According to the hypothesis the amount of sapwood is directly controlled by the size of the crown.

Holmen Skog AB is an important supplier of conifer pulpwood to the Iggesund Paperboard mill. After logging and transport to the landing by a forwarder, the wood is loaded on trucks for further transport, often by using separate loaders. During this handling process considerable amounts of stone material is sometimes mixed into the pulpwood and this causes problems for the industry. The aim of this study is to identify which part of the chain from forest to pulpmill, that contributes the most to this contamination. Sizes and total volumes of the contaminating stones were also investigated.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

Many wood living insects are considered threatened by modern forestry due to the reduction in amount of dead wood. During the last decade various methods have been used to enhance the quantity of dead wood in managed forests. However little is known how and if these methods are aiding saproxylic insects. The threatened tenebrionid beetle, Upis ceramboides, is already extinct in southern Sweden. It develops in white rotted dead birch (Betula spp) and requires sun-exposed sites.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

A baggy paper web has parts that are longer than neighboring parts. One of the assumed reasons for bagginess is thickness variations of the paper. In the roll the thicker streaks then add up to form a ridge. In the ridges the paper is strained and during storage the strain may become permanent. When the paper unreeled it is then baggy.

The purpose of this study is to examine some factors that make a human grouse hunter to prolong and increase its hunting effort. The theory of optimal foraging is used for explaining their behavior.The data of this study is collected from a web-based inquiry from 2007 answered by grouse hunters in Sweden. The method that has been used is mainly bivariate statistics and logistic regression analysis.Key findings shows that an experienced grouse hunter has more than 5 times the chance of prolonging hunting effort when grouse density is high, compared to a beginner grouse hunter. On the same time experienced grouse hunters also stop hunting in advance when grouse density is low to a larger extent than inexperienced hunters. Other factors of importance for prolonging the hunting effort for a day are age and the travel distance to the hunting area.